If I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

if I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

If you are running iOS 4.1 on a stock, unmodified 3gs, you should
have no problem. Do a backup of all your data, music, pictures, etc
before as protection.
If your iPhone has been jailbroken or hacked to work with a carrier
other than the one the iPhone was originally locked to, you may
have problems.

Similar Messages

  • HT4623 i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?

    i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?. I can active my phone?help me, please!

    Well we need to know what your problem is if you want someone to offer a solution for you

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • How to update iphone 3gs from ios 4.1 to latest available version?

    Hi
    My daughter has bought a 3gs which is currently running 4.1. Can it be updated any further and how would she do this? when the phone is plugged into iTunes and we click the update button is just says iTunes is running the latest version and doesn't update the phone.
    Can anyone help please?
    Many thanks
    Jen

    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Updating iPhone 3GS to iOS 5 software won't work and i cannot use my phone! Help!

    I tried updating my iPhone 3GS to the iOS 5 software and during the process of trying to update my phone is it saying that it cannot activate my iphone. it says that it could not be activated because there activation server is temporarily unavailable. Also when i plug it into itunes it simply said that there is no sim card installed even though there is! PLEASE HELP!!!

    i shut the iphone down and waited 5 seconds restarted it and it had me log back in, add my apple id, go to terms and conditions I was then able to hit agree and get past the screen.

  • HT4623 I can't update my 4s from 5.0.1 to 5.1.1 by itune or the phone,  message show "iso 5.0.1 up to date "

    Good day
    I am trying to update my iPhone 4s from 5.0.1 to 5.1.1 and  a message show that ios 5.0.1 up to date !!!!
    On other hand I try by iTunes & iPhone but it’s the same message
    Also I reset the all setting and the same message show!!
    However it went well by my x iPhone 3gs & 4
    Regards
    Abdulaziz Ali
    [email protected]

    You can't because you are only able to update your phone to the latest iOS, so it will have to be iOS 6 or nothing.

  • HT4972 Hi All can some outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

    Hi All can someone outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

    Please read and follow the instructions of the Apple link you posted from. Please note, if you have a 3G as opposed to a 3GS, you can not upgrade above iOS 4.2.1.

  • TS3694 I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
    You'll need to go elsewhere for support.

  • I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
    I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
    Thank you!

  • Updating iphone 3gs to ios 5, is it safe or will i have issues?

    I've been weary about updating my iphone 3gs from ios 4 (4.3.5 to be exact) to the new ios 5.  I didn't have a problem sitting on an older update untill my phone started acting up and the only thing to do to fix it is to do a restore.  itunes is forcing me to update in order to restore (didn't used to do that untill the new itunes update came out a while back...makes me angry) therefore causing a bit of concern with me.  I do recall how the 3G acted when the ios 4 came out, and my worry is will the iphone 3Gs do something simmilar or worse.  What are the experiances you guys have had with it, both good and bad, I'm curious.  Also is it a good idea to update the 3gs to the ios 5 or not.

    Hi I updated my 3 gs without any problem a d it works fine my wife now has it since I got my 4S

  • Update Iphone 3gs by ios 5.1.1...?

    Hello Everyone
    i want to update my iphone 3gs from ios 4.2.1 to 5.1.1.
    my iphone information is following
    Carrier:AIRTEL
    CAPACITY:14.2GB(16GB)
    VERSION:4.2.1(8C148a)
    CARIAR:Carrier 9.0(VADAFONE LTD.)
    Model:MC131B
    SERIEAL:86******3NP
    IMEI:****
    FIRMWARE:06.15.00
    COUNTRY:UNITED KINGDOM
    SIMID:23415
    iBoot: NewBootrom 359.3.2
    Now
    How to update my iphone 3gs by 5.1.1 without losing baseband (6.15.0) using redsnow.
    Note:
              ==> Phone is currently unlock and jailbroken.
              ==> If i follow the instruction from internet tutorials so always or every time itunes throw the 1602 and can't bypass from it.
    Any kind of help will be appreciable.
    Thanks Apple team.
    <Edited By Host>

    There is no supported way to downgrade.
    Have you tried replacing your SIM card?

  • Do I need to update my 3gs to ios 5 in preparation to transfer everything to my 4s?

    Do I need to update my 3gs to ios 5 to make a smooth transition to my 4s arriving Friday or can I transfer everything over (restore from backup) from mismatched operating systems?
    thanks

    I want to make sure I'm doing it in a way that will keep important things like my text history intact on the new phone.
    Since that's not something that is "synced" but I believe is rather kept in the backup, does that mean I have to "restore" the new phone from a backup of the old phone? And if so, does the ios have to match on the backup?
    thanks

  • I tried to update my ipad from ios 4 to 5 and now it won't connect to my computer - it is fully restored and can't connect - getting an error message. Help!

    I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
    Help!

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download)

  • HT4972 I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to

    I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to open.

    I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program  - neither indicated a newer version of itunes is available. (it is a vista computer).
    The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
    The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system.

  • HT201442 hi, i am trying to update my Ipad2 from ios 4.3.3 to ios 7.0.4 i donwloaded the file but i am getting error 3194 and i cant update it what can i do

    Hi, I am trying to update my ipad2 from ios 4.3.3 to ios 7.0.4 after i have downloaded the update it cant update my ipad it gave me error 3194
    what can i do. Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

Maybe you are looking for

  • Group and country specific acc in operating coa

    hi, the same chart of account is shared among countries in the same region. there are 3 kind of gl account, example for sales account : 50000000-51999999, I50000000-I51999999 and L50000000-L51999999. they in the same coa but different acc group. also

  • Bug in iOS 7 privacy

    Bug in iOS 7 > privacy>Advertising Click the "Learn More" link under Reset Advertising Identifier Takes you to a page and I get the following: Access Denied You don't have permission to access "http://appldnld.apple.com/iOS7/091-5242.20130830.Pprfg/A

  • How do I put a pause in a speed dial on a DX650?

    I would like to set up a speed dial for a daily conference call so it will dial the phone number, pause, then add the conference code. I tried , and . and # and they are not working.

  • Fixing the quanitity field in production order

    HI, I create a sales order for 10,000 numbers and then after MRP run a production order for same 10,000 numbers is created. My Client has people in the production department  who change the prodcution order quantity to say 12,000. Is there any way by

  • Command Authorization Config best practice using ACS

    Hi Is there any best practices for configuring Command authorization (for router/switch/asa) in CS-ACS? To be specific, is there any best practices to configure authorization for a set of commands allowed for L1,L2,L3 support levels? Regards V Vinodh