If i update my facebook status it says upload my mobile it does not says by ios.im using ios 7.2

when my update my facebook status it says update my mobile not by ios

Yes, that's what it does. That's the way the FB app works. It has been reported that if you use Siri, it will note that you have posted from iOS.
I'm curious and people keep refusing to answer this question. Why is it important for it to say that it's from an iOS device as opposed to mobile? I'm not trying to be rude. I'm just curious.
Best of luck.

Similar Messages

  • When i update my facebook status using macbook air. It should say "updated via Apple Macbook Air". How is it possible?

    When i update my facebook status using macbook air. It should say "updated via Apple Macbook Air". How is it possible?

    It's upto Facebook to put tags like that or People can post API keys to allow you to post using 'updated via Apple Macbook Air'.

  • Everytime I update my facebook status using my iphone 4, it say facebook for iphone. Now facebook mobile. What happened?

    Before, whenever I update my facebook status its always says "facebook for iphone", now "facebook mobile". What happened?

    First thank you for your help. It says that it will reset my settings back to factory settings. I don't know to much about all this --- will I loss my email, facebook, etc, and have to reinstall all of them?

  • I just updated to OS X mountain lion and my notification widow does not have the twitter/facebook feature any way i can set it up or turn it on?

    I just updated to OS X mountain lion and my notification widow does not have the twitter/facebook feature any way i can set it up or turn it on?

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • I have updated my facebook application to the latest one and it is not working..what should i do?

    I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.

    cristinar wrote:
    I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.
    As suggested try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
    Also, it might help if you provide a little more detail on what you mean by "not working"

  • Status row for item '', activity ID '264766' does not exist.

    I have developed a custom workflow which is AME configured. The workflow runs well in R12.1.2 instance. But when deployed to R12.1.3 it fails out.
    error starting at line 20 in command:
    exec XX_PACKAGE.XX_PROCEDURE(19098, 'XX_WF', '1:Yes;')
    Error report:
    ORA-01086: savepoint 'WF_SAVEPOINT' never established in this session or is invalid
    ORA-20002: 3101: Status row for item '', activity ID '264766' does not exist.
    ORA-06512: at "APPS.WF_ENGINE", line 4192
    ORA-06512: at "APPS.XXIFMIS_ICX_UTILS", line 20
    ORA-06512: at line 1
    01086. 00000 -  "savepoint '%s' never established"
    *Cause:    Trying to roll back to a save point that was never established.
    *Action:
    Could anyone suggest how I can debug this issue.

    Sosa,
    When i run the wfstat nothing wrong in the info. unable to find the issue.
    But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
    In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
    When i comment these two dml ( update to header status & insert into events ) there is no error.
    Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
    Regards/Prasanth

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

    I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

    I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

  • When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of CC and now it isn't editing photos!  HELP please required.

    When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of Photoshop CC and now it isn't editing photos!
    Lightroom opens up Photoshop but the image doesn't appear!  Any help gratefully needed!

    Ok I sorted it, by uninstalling and re-installing Photoshop

  • The Acrobat updater keeps on asking me for a password, but it does not accept my Apple ID or my Adobe password. What password do you folks want?

    The Acrobat updater keeps on asking me for a password, but it does not accept my Apple ID or my Adobe password. What password do you folks want?

    I'm guessing it needs a password to update your system - that is, the administrator password. Most software needs this when you install it.
    This is the password you (or someone) chose when you first switched on your computer.

  • I have updated itunes and the newest software. My home button does not work.  Please help

    I have updated itunes and the newest software. My home button does not work.  Please help

    It could be that your button has justy gone out.  You may try getting compressed air to blow out any dust in there.  If that doesn't work, you may have to get your button and ribbon replaced.

  • OS X 10.8.1 update cannot be installed on this disk. This volume does not meet the requirements for this update.

    HI
    I had installed mountain lion on my MBP 13" early 2012, but it has lots of issue, when i tryed to up date to 10.8.1 it shows the error "OS X update cannot be installed on this disk. This volume does not meet the requirements for this update"
    if i run the software update nothis is showing, current os version is 10.8

    This did not work for me.
    Note, that at one point the Apple developer knew exactly what the problem was and decided not to let us know. If we were tole what the problem was we woud have an idea of how to proceed.

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

Maybe you are looking for

  • Skype 7.5 has stopped working on Windows 7

    Hello everyone I keep getting the "Skype has stopped working" error message whenever I start Skype. I'm using Windows 7, updated with all the recent updates. Skype was working fine up until yesterday (it crashed occasionaly, but was useable. I have t

  • Bad image after taking a picture

    Occasionaly when taking pictures, the result is like a psychadelic image or similar to a negative. How do I fix this or should I return my camera for another one? Solved! Go to Solution.

  • Issue with installation

    Installation is not completing even after a long time too. Elapsed Time is continuously increasing but no increment in installation progress. Image :- http://www.4shared.com/dir/DOaaTdJ6/Imageshare.html Thanks, Rajdeep

  • CD in Flash not working anymore

    Hi, A couple of years back I've produced a CD-Rom. It is basically a main Flash movie loaded in an HTML page which, through specific buttons accessible by the user, loads HTML popup windows with some other flash contents in it. It still works fine on

  • How to take Control Action

    Hi I have already developed an application using Measurement studion component works CWAI Activex under Visual Baisc with three VXI-MIO-64E1 modules. We are acquiring data from VXIDAQ modules contineuousely and writing in binary data file in hard dis