If i upgrade from pages 2.0.2 to pages 4.1 will i be able to open older word docs on lion

Before I buy pages 4.1 I was just checking that I be able to open older word docs, since installing lion we have not been able to open older word docs. Many Thanks

Test by yourself with the documents which you wish to open.
Dowload the free 30 days trial iWork from :
http://www.apple.com/iwork/download-trial/
install it,
apply the updaters then test it during 30 days.
An other scheme which costs nothing is to download the free LibreOffice.
Yvan KOENIG (VALLAURIS, France) vendredi 24 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Similar Messages

  • I recently upgraded my OS from 10.4.11 to 10.6.8 but lost the iWork Application in the process. I can't find the original CD. If I purchase the latest Pages from the Apple store, will I be able to open documents saved in Pages (?2006)?

    I recently upgraded OS from 10.4.11 to 10.6.8 but lost the iWork Application in the process. If I purchase Pages from the Apple store, will I be able to open documents saved in the older Pages (?2006)?

    You won't be able to buy Pages from the Mac App Store on 10.6.8. You need to reload it from the original source.
    (109924)

  • When I upgrade to iWork '09 will I be able to open my previous .pages files

    YsDa have book manuscripts that I want to be able to work on using my iPad which required iWork '09 since none of my exports from version 1.0.2 was not good enough. So I sort of went into panic mode because the DVD drive in my old PowerBook is sort of wonky and I can't upgrade my so beyond 10.4.11 and now what? But as luck would have it I found a new iWork '09 on eBay (the slightest scratch would not allow an install on my persnickety computer) and it was cheap too! It should be here in a couple of days. So now I worry..
    Will I be able to open my old pages files up with the new version??? I have several completed books now up on amazon that I would love in the iBooks store, so I need to be able to open those files. And I have two unpublished manuscripts that I would die a thousand deaths over if I cannot open them ever again.
    Has anyone ever run into an opening crisis following an upgrade???
    M

    I currently disagree with your suggestion not to write a large document in Pages. At least, so far, with my version 1.0.2!  My first book was 8x10 and 440 pages long with 27 full page images. No problems there. The trilogy books are each 6x9 and the shortest is 432 with the largest 500 pages. Again, no problems. Not even with exporting to a pdf file for CreateSpace. And with the one book that was 440 pages long, there were over 100 pages of index. Then when I wanted to create a Kindle book with that index cross-referenced AND entirely clickable, there were thousandSSSSSS of links that I created in Pages. Pages being the ONLY app that could handle the sheer volume of that task. I was impressed. I'm still impressed.
    My problem is that my computer...a PowerBook 13" that is was only able to have a grand total of 768 MB of RAM (I know...it's laughable...but that is the way it rolls at top speed).  I tried to install more but it wouldn't accept it, being that 1000MB of RAM was it's max and the one chip was soldiered in and I couldn't get it above 768MB. So that's my world. It's limited. And yet, my old Pages and this old computer has done AMAZING things. Actually, amazing,is an understatement.
    When I do write, I put placeholders when an image might need to go. The trilogy has an image as a decoration at each chapter. So there are 22 of those in each book too. I originally used low res images to hold that place, but I have one all ready to publish and it has everything in it that it needs and it opens fine.
    What I would NOT do is create a gigantic color picture book. I would definitely limit my images. Not only for the sake of being able to open the file, but because it would be too expensive to publish something via CreateSpace in color.
    I have tried Libre Office. I was not impressed. Same with Scrivener. Pages has been outperforming them both on all counts. So far. After I try the '09 version, I'll make another assessment of my needs vs software. And I will continue to pray that my little PowerBook will keep running (so far, so good). Even if it's only to use Pages that hasn't been dumbed down and my Photoshop, because it will be a blizzard in you-know-where before I pay Adobe for Photoshop by the month. That just will not happen.
    When push does finally come to shove, I will figure out what I'll do then. I'm not even sure I would buy another Mac. There have been too many changes that I don't particularly like enough to pay so much for only to despise. I have always loved Macs because they were Artist friendly. There was so much that could be accomplished using one. They have been worth the expense just to be able to make dreams visible. But now, it seems that the power of the computer is being reduced to that of a cell phone and a tablet and that is just not going in the right direction at all. I am hoping that all changes. Soon.
    I've been setting money aside for a new Mac. As the money has accumulated, the Mac's have changed. Not to be what I had wanted though. I am hoping by the time I drop the last dime in the pink piggy there will be a machine that is right for my eclectic purposes. If not, I'll spend a small portion of it on a big PC and spend the rest of it on a cruise.
    Thank you all for answering my questions.
    Peace.
    And say a little prayer that Mac doesn't obliterate the specific needs of artists/musicians/movie makers/writers/animators/and all the others who need more than the bare bones basics to keep us happy.

  • When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

    When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

    Are the images placed in a table? Many Word user have the habit of doing that. Tables are not handles the same way in Word and Pages so they get "hidden" in Pages. One way to find this out is to change the size of the paper of the document. You do that in the Page setup in the file menu. Create a document that is much longer that the default one and see if you images will pp up.

  • Last time I updated pages I lost features I liked and was unable to open some pages files.  Now I see the features I liked are back but I have a lot more files to worry about.  Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

    Last time I updated pages I lost features I liked and was unable to open some pages files.  Now I see the features I liked are back but I have a lot more files to worry about.  Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

    Within reason, Pages v5.2 documents are forwards compatible with Pages v5.5.3. Apple introduced the single file format document as a default with Pages v5.5.3 which is not backwards compatible with Pages v5 on Mavericks.
    However, they also provided a File > Advanced > Change File Type > {Single File, Package} menu that allows you to change the current Pages v5.5.3 document into the backwards compatible Package type document. You would follow this transformation with a File > Save operation to complete it.

  • Pages is telling me that I need a newer version before I can open my document.  I have the latest version and I am able to open older versions.  Whats up?

    Pages is telling me that I need a newer version before I can open my document.  I have the latest version and I am able to open older versions.  Whats up?

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    Is Apple compatible with Microsoft Office?
    Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
    How can I transport from Windows to Mac?
    You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
    If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
    The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
    Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

  • Will I be able to open a library from version 1.5.6 with Aperture 3.1.2?

    I have two computers, one running Aperture version 1.5.6 and another running Aperture 3.1.2.  Question is will I be able to open my library from version 1.5.6 with version 3.1.2.  The computer that is running the early version is dying on me. 
    Thanks.

    When you access the old library with 3 it will upgrade the library before opening it. Make sure you have a backup of the library before accessing it with 3 just in case.
    Also be aware once the library is updated it will no longer be accessible from Aperture 1.5.6 and there is no way to reverse the upgrade.

  • Will I be able to open a project from 1.0 into 3.0?

    I'm thinking of upgrading but i'm in the middle of a large project. Will I be able to open a project created in 1.0 in 3.0 if I upgrade?

    There's just too many differences between the two systems for the older version to know what the project information from the newer version means.

  • Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

    not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

    okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
    if you are to do this please back up first with Time Machine. You can do this with a usb drive.
    Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
    Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
    once it is open go to the top of the window and put your email address that you are having problems with.
    once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
    right click and delete them. make sure not to touch any other files that dont say them things on them.
    Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
    Hope this helps. if something is not clear just ask.

  • Is it possible to have a PDF form flow to a second page IF the user needs to type in a lot of information? ( Like a Word Doc would)

    Is it possible to have a PDF form flow to a second page IF the user needs to type in a lot of information? ( Like a Word Doc would)
    An automated second page.

    There are two approaches.
    If you wish to use AcroForm technology, then you would need to write a bunch of JavaScript to enable this.  It has been done, but it’s not trivial.
    If you wish to use XFA technology, then it can be setup to happen automatically.
    Be aware that in both cases, even though both technologies are part of the PDF standard, that the forms will only be usable in this manner in Adobe’s viewers as many others don’t support JavaScript or XFA.

  • I am using Pages 4.3. I created a Document using Pages 4.3 that is 280 MB (it is 350 pages long). Will I be able to open it in Pages 5.0?

    I am using Pages 4.3. I created a Document using Pages 4.3 that is 280 MB (it is 350 pages long). Will I be able to open it in Pages 5.0?

    Hi,
    WARNING
    it´s impossible (for me) to open Pages 5 documents in Pages 4, which is absolutely no go. You can open any f..... word.doc but no pages 4.
    Apple is getting worser every day, it´s a shame. There is no information about this before you buy it.
    So now you have to ask your friends or colleagues to convert a pages 5 document to a word document, so you can open it with pages 4. Hoiw ridiculous is that?
    Pages 5 is a joke. In 5.0 they forgot to manage the task-bar, which came shortly after 4 weeks or so in 5.1.
    The only good: you can run ist parallelly to pages 4.3 but it´s not worth the money.
    APPLE MAKE A  BETTER JOB

  • I opened a word doc in pages but when I went to edit the doc all I could do is activate boxes of text....no cursor or keyboard showed up.  How do I edit an imported doc?

    I imported and opened a word doc to pages.  When I went to edit all I got was highlighted boxes of text....no cursor or keyboard.  How do I edit an imported doc in Pages?

    No, it's a document I created and it's not locked.   I did it at work and sent it to Pages so I could work at home.   It opens but I can't type or edit.

  • HT202879 I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

  • Will I be able to open my 2004 word docs in Lion using Pages?  How about Powerpoint using Keynote?

    Will I be able to open my 2004 word docs in Lion using Pages?  How about 2004 Powerpoint using Keynote?

    KT35 wrote:
    My word 2004 won't open, it says you can't open the aplication Microsoft Word because power PC applications are no longer supported". How can I get it to work?
    You can't.
    The components of MS Office 2004 (which includes Word 2004) are PowerPC apps. In order to run PowerPC apps in Snow Leopard and earlier on an Intel Mac required the assistance of Rosetta software. Lion does not support Rosettta, so such apps can not be used in Lion.
    In order to use your documents in Lion, you will need to -
    • update the apps to a current version, ones which do work in Lion
    • migrate the docs to other compatible apps which do run in Lion, such as Pages.

Maybe you are looking for

  • Preço liquido no Pedido de compra e bruto no smartform do mesmo PO

    Bom dia, Em uma empresa que adotou o preço liquido para criação dos seus pedidos de compra, mas gostaria de imprimir no formulario smartform o preco bruto (evitando desta forma a incorreta interpretação de valores negociados com seus fornecedores) qu

  • Aperture Library/Database hacks

    After one week playing around with aperture, i want to share my current insights with 'customizing' (my) aperture's way of dealing with my picture files. Warning: The following thoughts and arrangements are working for me, they're undoubtly NOT suppo

  • Regading getting data to and forth between 2 programs through SUBMIT

    Hi All, I have a issue regarding fetching internal table data from one program to another. Actually I have <b>Main Program</b> from that through SUBMIT statement i am calling another program and executing it for every 100 records - Actually this prog

  • Order of photos into a book

    I have 400 photos I wish to import into a book. The max pages pf a book is 100. I wish to design the pages and then import the phots in a pre arranged order to save time. Is this possible?  have done the following. I have used autoflow and it does no

  • How to link XI-Development to the central SLD on XI-Production?

    Hi, we have a two systems landscape with XI-DEV and XI-PROD. So far, we have used the SLD on XI-DEV. Now we want to use one central SLD that is running on XI-PROD for all developments on XI-DEV. What is necessary to to that (any documentation availab