If I upgrade to ios 7 right from my device (not itunes) will I loose my pictures, apps and info
If I upgrade to ios 7 right from my iphone (not through itunes) will my pictures, apps and other info get automatically erased?
It shouldn't, but you should update your iPhone's backup immediately beforehand.
And a good idea to import the photos/videos in the Camera Roll with your computer beforehand to be on the safe side.
http://support.apple.com/kb/ht4083
Similar Messages
-
If I upgrade to ios 5.1.1 on my iPhone, will I lose all my apps or have to redownload them?
Or how can I prevent this?Now everything should remain the same as it was prior to the update.
But a good practice is to always do a backup prior to any update - "Just in case" -
I recently upgraded my operating system from Vista to Windows 7. Ibacked up all of my music on an external hard drive before I reformatted my computer. I have reloaded iTunes several times and attempted to transer my files back to my computer. Everything appears to transfer but once I remove the external hard drive I get a message stated file cannot be located. What am I doing wrong?
I just posted a similar question -- five months later. Did you ever find a solution?
-
HElp me please
Sorry for my ingles i don't speakHi Le_roque
These are the instructions for your issue as outlined at http://support.apple.com/kb/ts3694
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Since upgrading to ios 8 from ios 7 on my ipad i keep getting the annoying certificatepop ups. Is there anyway to eliminate them? Its more of an inconvinience to keep having to close them.
Check to make sure that the year, date, and time are set correctly on your iPad.
-
Since upgrade of IOS, my once dependable camera connection kit will only import landscape photos from my Sony Alpha DSLR, but red exclaimation symbol only for portrait format. Any ideas why?
I am using an ipad2 with the latest operating system upgrade. My problems started with the upgrade to v6. Before that, portrait and landscape pics were uploaded from camera with no problems.Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris -
After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same
Hello there, Kishoresaraogi.
The following Knowledge Base article provides some great steps to troubleshoot your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?
Good morning
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3125
Hope this helps
Cheres -
Will I loose all my files and photos when I upgrade from 10.5.8 to Snow leopard
I have purchased Mac OS X Snow Leopard from the Mac store and I am ready to install it. Will I loose all my files and photos when I install it ? I am upgrading from 10.5.8 to 10.6.3 Snow leopard.
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
-
i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
will i loose my wts app media if i restore my iphone 3G and please tell if ios 5 or ios 6 can be upgraded on 3G?
Backup
iTunes http://support.apple.com/kb/ht4946 -
how can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.
Search this forum. Your issue has already been addressed ad nauseum.
Best,
GDG -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.
Maybe you are looking for
-
HI, I have a heap of digibeta footage digitised using black magic. It is widescreen 16x9, 720x576 PAL. however on inspection of the properties, the .mov file has pixel aspect ratio is shown as 1.0940. In after effects, if the footage was interpreted
-
Error 3259 in update or restore the Ipad
Good Day, I've been trying to restore or update the Ipad and I are presenting a couple of problems, making this process could solve the problem. I have read in media that can be Fireware or Proxy error, and change the settings on both and the problem
-
How to get data from MySQL into Analysis Services Tabular Model
Hi, I have a problem with Analysis Services Tabular Model and MySQL ... I have to use several MySQL databases as a source of Tabuar Model .. Is there any way to get connection working from Tabular Model to retrieve data from MySQL database. I have a
-
CCMS for monitoring for Message Bus RFCs in TCP/IP
Hi Can we do CCMS configured for Real-time Monitoring of RFCs of Message Bus in TCP/IP in sm59 Example: C_MES_AEP for C Cluster Q_MES_AEP for Q Cluster W_MES_AEP for W Cluster XXXX for W Cluster AFS XXXX any other MB Cluster Re
-
This may seem a bad question, but like my teacher said "the only bad questions are those no one asks" How do you publish to HTML5 in Cap8? Is the box dark grey or light grey? Can you create a swf and html file in 1 package? Thanks