If I use blast option in zone prefix command

Hi,
I would like to introduce in our network the remote zone gatekeeper redundancy.
I saw there' s a "blast" option in zone prefix command.
Could I use that without problems?
Thanks.
Regards, Paolo

By default, LRQs are sent sequentially to the remote gatekeepers. With sequential, the LRQs are sent one at a time with a delay between each. With blast, the LRQs are sent back-to-back in a rapid sequence without any delay between them. If you would like the LRQs to be sent simultaneously (blast) to each gatekeeper, you need only specify the blast keyword on one zone prefix command per E.164 prefix

Similar Messages

Can we use select options in smartform

can we use select options in smartform if so can any one send me a sample code...
Thanks
bhaskhar

Hi ,
Can u explain why u want to use select options in smartforms . U can try it in program lines .
Its better to use select options in the driver program and fetch data accordingly in the driver program or passing the selected values from select options to the smatfrom and fdetching the data there in smartform .
Regards

Search help is not coming while using select-options?

Hi All,
I am using select options in my selection screen, i used wdr_select_options, also i coded some parameter values also
( non select-options ). For that field i am not getting search help. If i create as normal i am getting? Suggestions pelase?
Thanks,
Venkat.

HI
what kind of search help is associated with the field.
ADD_SELECTION_FIELD method has some specific parametrs for value_help
give the input there and try again.
these parameters are
I_VALUE_HELP_TYPE
I_VALUE_HELP_ID
I_VALUE_HELP_MODE
I_VALUE_HELP_STRUCTURE
thanks
sarbjeet dingh

Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

HT5622 I did not choose "use icloud" option for my initial setup. so, it is creating for not enough space in my ipad. How do I go back and set up icloud to store data?

I did not choose "use icloud" option for storing during my initial setup. How can I reset icloud account, so it can be used for storing.

Welcome to Apple Support Communities
If you are planning on using iCloud to store files, forget about iCloud and use a cloud storage service like SkyDrive or Dropbox. iCloud is focused on information sync between the iPhone, iPad, iPod touch, Mac and PC instead of storing files like MobileMe. It's not worth using iCloud for this.
If you still want to set up iCloud, open Settings > iCloud, log in with your Apple ID and follow its steps

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

Error while using selection option variable in the selection screen

Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.

Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

My keyboard freezes after using the option key... what gives?

I have a 17" MacBookPro with OSX 10.6.8
The problem: My keyboard key freeze after using the " option key" in Photoshop or when downloading a file using the option key.
I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
Anyone else have or had this issue? it's frustrating. What's the deal?

hausman wrote:
tianmiao0304 wrote:
Thanks for your explanation!
Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!!

Using select-option in webdynpro for ABAP where I have two separate pages

Hi Experts,
I have a requirement where I have two pages. The first page is a selection screen that contains 2 select-options to select carrid and connid. There is also a button 'Submit'. The second page contains a ALV grid output based on the selection screen criteria.
Second page is opened on the clicking the 'Submit' button in first page.
How to design a ABAP webdynpro component for this scenario?
How to pass select-option values to the next page?
What nodes/attributes should I have to create in component controller?
Please provide me the step by step info.
I have seen the weblog by Rich Heilman at /people/rich.heilman2/blog/2005/12/20/using-select-options-in-a-web-dynproabap-application
But it has only one page. So I am not able to recreate my scenario based on this.
Thanks
Gopal

Hi Experts,
I have a requirement where I have two pages. The first page is a selection screen that contains 2 select-options to select carrid and connid. There is also a button 'Submit'. The second page contains a ALV grid output based on the selection screen criteria.
Second page is opened on the clicking the 'Submit' button in first page.
How to design a ABAP webdynpro component for this scenario?
How to pass select-option values to the next page?
What nodes/attributes should I have to create in component controller?
Please provide me the step by step info.
I have seen the weblog by Rich Heilman at /people/rich.heilman2/blog/2005/12/20/using-select-options-in-a-web-dynproabap-application
But it has only one page. So I am not able to recreate my scenario based on this.
Thanks
Gopal

How to use select-options in the function module of import parameter ?

Hi ...
   I have created a BAPI and tested in SWO1 tcode , by giving the single value for an company code ( BUKRS ) , it executed properly .
Same thing is working after implementing in a program .
so now it is working for fetching a single company code details .
My requirement is : I want to use select-options in program as well as in function module IN IMPORT PARAMETER.
Program :
REPORT ZTEST.
TABLES : T001 , ZBAPI_STR .
TYPES : BEGIN OF TY_ITEM .
          INCLUDE STRUCTURE ZBAPI_STR .
TYPES : END OF TY_ITEM .
DATA :WA_ITEM TYPE TY_ITEM ,
      ITEM LIKE STANDARD TABLE OF WA_ITEM INITIAL SIZE 0 .
PARAMETER : BUKRS TYPE ZBAPI_STR-BUKRS.
call function 'ZBAPI_FMT001'
exporting
    bukrs         = BUKRS
IMPORTING
RETURN        =
tables
    itemtab       = ITEM
IF ITEM IS NOT INITIAL .
LOOP AT ITEM INTO WA_ITEM .
    WRITE : / WA_ITEM-BUKRS , WA_ITEM-BUTXT , WA_ITEM-ORT01 , WA_ITEM-LAND1 .
ENDLOOP.
ENDIF.
FUNCTION MODULE :
FUNCTION ZBAPI_FMT001.
""Local Interface:
*" IMPORTING
*"     VALUE(BUKRS) TYPE EFG_TAB_RANGES
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*"      ITEMTAB STRUCTURE ZBAPI_STR
SELECT BUKRS BUTXT ORT01 LAND1 FROM T001 INTO TABLE ITEMTAB WHERE BUKRS = BUKRS .
ENDFUNCTION.
Regards
Deepa.

I have given a similiar example which i did
Declare a
Table type:Z_TT_PONUM
Short text : Select options PO Number
in SE11 tcode with row type eg: Z_ST_PONUM
create a structure (this will be the row type)
Structure          Z_ST_PONUM
Short text         Select Options Field PO number
Compenent Compent type
SIGN       BAPISIGN      Inclusion/exclusion criterion SIGN for range tables
OPTION       BAPIOPTION      Selection operator OPTION for range tables
LOW       EBELN                      Purchasing Document Number
HIGH       EBELN                      Purchasing Document Number
In the function module import
give as
I_PO_NUM     TYPE     Z_TT_PONUM     opt pass value Select options PO Number
Hope this is exactly what you want to know.
So you create a structure simliar to mine but the low an high whould be your component
then a table type and then include that in the BAPI.
Then pass your select-option value to this BAPI when you call this BAPI in the program

Cannot Open A Library File Using the 'Option' key When Launching iTunes

I found that when I tried to open a different iTunes library file then my default by using the 'option' key when lanching iTunes that the iTunes Library file was greyed out.
I looked in the previous Library Folder and noticed that the old file had the extension .itl.
My solution was to add the extension .itl to the end of the of the file name of my iTunes Library files and things then worked when launching with the 'option' key. As an example 'iTunes Terry Library' became 'iTunes Terry Library.itl'. I applied this to all my iTunes library filles and all is well. Of course make a duplicate of the file you are going to change so you have a backup file.
I am using iTunes 10.4 and Sno-Leopard 10.6.8.
MJ

No, choose library works in Windows. The thread you linked to suggested that, on OSX at least, iTunes now behaves like almost every other application in that you can open a data file associated with the application and it opens that data file rather than a different one it had opened in the past. I was hoping things might have actually changed.
In short, holding shift or option while launching the app is a very clunky way of opening an alternative library given the standard behaviour of the GUI where "opening" a data file normally opens the application that can work with it.
tt2

Interest calculation on cutomer DUE items using FINT option

Hi.
I am using FINT option to calculate interest run for customer due items.
I have posted a customer inivoice using F-22 with posting date as 05.01.2011. I gave the tolerance days as 7 days.
Therefore system is showing that the customer open item as DUE on 11.01.2011 in FBL5N.
When i run FINT option with date as 12.01.2011 system is picking only overdue items and not picking this DUE item.
Can anyone help me in this issue.
Regards,
Padmavathi

Dear Murali,
I have changed the option in item interest calculation - Ref date as 1 - Value date (or base line date for net payment). Earlier i gave the option as 4 - payment baseline date.
Since i changed the ref date as 1 system is calculating the interest from net due date instead of posting date.
This is solved.
But one more problem is that in the system for the interest indicator i gave from date as 01.01.2011 that means system should select open items from the invoice date 01.01.2011. But system is selecting all open items in that customer a/c irrespective of date given for the initerest indicator when i run FINT option. In FINT option i gave interest indicator from and to as B1. still the system is selecting all open items irrespective of date given for interest indicator.
Can you help me.
Regards,
Padmavathi

"Recognize Text Using OCR" Option Grayed Out in Acrobat 9 Pro (9.5.1)

Running Adobe Acrobat 9 Pro. I'm working with electronically filed court documents. I regularly use the OCR tool (Document -> OCR Text Recognition -> Recognize Text Using OCR...) on these court documents.
Problem is, every once in awhile, I'll run into a document where the "Recognize Text Using OCR" option is inexplicably grayed out. I have no idea what is causing this. I have checked the Document Properties and confirmed there are no security restrictions for the document. It happens inconsistently, in that OCR will work with a document filed by an attorney in one case, but it won't work in the same kind of document filed by the same attorney in a different case.
Any help getting OCR to work on these few rogue documents is appreciated!

Form created with LiveCycle Designer are XML forms in a PDF wrapper and many of the usual PDF properties are not available. This is like embedded rich media in a PDF. If you want to research this, Adobe and ISO have the PDF Reference manual available as a free download.

Saving a Text data to a PDF file without using print option

Hi,
I want to save a Text to a PDF file. I want to assign the path of the PDF file as a default one.
If I use Print options, then it ask for the file path at the run time.
Is there any method to save to a PDF file without using print option in Labview 8.2.
Regards,
Raja

This question comes up a lot. Did you try searching? It depends on the PDF printer driver that you're using. See here, here, here, ...

If I use blast option in zone prefix command

Similar Messages

Maybe you are looking for