If i use Ps5 the order lasso, drag and drop or letters the win vista crashes down. Can anybody help?

If i use PS5 the order lasso,drag and drop or letters the win vista crashes down. Can anybody help me?

Now that I'm looking at it, I don't have it... but I still have the problem:(. I rebooted the PRAM, I cleaned my permissions, run utilities checks, nothing helps, I'm at the end of my wits. I called apple - all I got was bad attitude... I don't know what to do, this disfunction makes it impossible for me to work....
does anybody know what I could do to fix this issue?

Similar Messages

Can't transfer playlists created in iTunes on my PC to my iPod 7th generation...what is the procedure to do this? I use to be able to drag and drop the playlists.

I Have updated iTunes on my PC and have recently purchased a new iPod. I can't get playlists that already existed in my iTunes transferred to my iPod. On the older versions I could drag and drop my playlists onto my iPod. Why can't I do this anymore? What are the steps to be able to do this.

iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

My mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

my mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

192 is local address within your network.
Unless the adddress is of a server that can reolve URL names to ip addresses you wont be able to load an external web page.
You can check what it should be by checking your router status page.
Or if you have an iOS device check under settings, W-Fi, select the network your attched to, then see what is next to DNS.
DG

Phone 4 Unable to drag apps to relocate on another page in itunes. Can anybody help?

iPhone 4s
Unable to drag apps to relocate on another page in itunes. Can anybody help with this please ?

Problem fixed... Thanks.

Hi there. I'm an iphone 4s user and i am unable to send text messages. Any time i try, I get the message "message send failure" can anybody help?

Hi there. I'm an iphone 4s user and i am unable to send text messages. Any time i try, I get the message "message send failure" can anybody help?

try contacting your carrier and see if they can resolve the issue.

I am using Mail with OS 10.9.1...I used to be able to drag and drop contact addresses from my address book to an e-mail header. Now I have to type all the names and can't drag and drop. Is there a setting for this? Thanks!

I am using Mail with OS 10.9.1. I used to be able drag and drop names from my address book into the address header, but can no longer do that. I now have to type each name in. Does anyone know if there is a setting for this or is it a feature of the updated software? Thanks for any info!

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

Can you use a custom cursor with drag and drop?

Hi there! I'm a newbie flash user and working on a simulation for a graduate course in instructional design. I'm using Flash Professional CC on Mac. Here's what I'm trying to do. I have several draggable sprites on the stage and three target sprites. I have specified the original x,y locations of the sprites and have set the end x,y locations as those of each of the three targets. Items must be dragged to one of the three targets.
Some questions:
1. Can I specify more than one End x,y location for a draggable sprite? I'm creating a lesson to teach kindergartners how to sort lunchroom waste. If they have a napkin, for example, it could either go into the compost OR into the recycling. In cases like this where an item could really be placed into more than one bin, I want them to get it right if they do either of those things, rather than forcing them to choose which one.
2. To make my project more "fun" for kids, I wanted to customize the cursor with a graphic of hand. When I tried this in the flash file it works perfectly until I add the drag and drop functionality for the wasted items. Then the cursor will more around but not pick up any items. Once I revert back to the standard pointer, the correct drag and drop functionality is restored.
3. I have it set to snap back to the original location if learner attempts to drop the item on the wrong target. I want to be able to play a sound file when that happens, as well as play a sound file when it lands on the correct target, as well as shrink the item and change its opacity so that it appears invisible. I want to give the illusion of it being placed into the bin. I have no idea as to the proper way to code these events so that they happen.
4. I've watched dozens of hours of youtube tutorials before coming here. I'm a quick study, but am very new to action script. In one of the videos the developer showed referencing an external action script file which I don't think is an option in CC. The coding method he used seemed much more streamlined and "clean" than the chunks I'm working with now. Is there an easy way for me to code information about these objects than the way I've got it here now? I hate starting new things with bad habits. The perils of self-teaching.
Thanks!
I'm pasting my code from the actions panel below so you can see what's going on:
stop();
/* Custom Mouse Cursor
Replaces the default mouse cursor with the specified symbol instance.
stage.addChild(customcursor);
customcursor.mouseEnabled = false;
customcursor.addEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor);
function fl_CustomMouseCursor(event:Event)
customcursor.x = stage.mouseX;
customcursor.y = stage.mouseY;
Mouse.hide();
//To restore the default mouse pointer, uncomment the following lines:
customcursor.removeEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor);
stage.removeChild(customcursor);
Mouse.show();
//set up variables and objects for dragging
var offset:int = 10;
var appleStartX:int = 243;
var appleStartY:int = 156;
var appleEndX:int = 522;
var appleEndY:int = 22;
apple.buttonMode = true;
apple.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
apple.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var cupStartX:int = 39;
var cupStartY:int = 266;
var cupEndX:int = 520;
var cupEndY:int = 175;
cup.buttonMode = true;
cup.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
cup.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var barStartX:int = 178;
var barStartY:int = 234;
var barEndX:int = 522;
var barEndY:int = 22;
bar.buttonMode = true;
bar.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
bar.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var orangeStartX:int = 284;
var orangeStartY:int = 102;
var orangeEndX:int = 522;
var orangeEndY:int = 22;
orange.buttonMode = true;
orange.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
orange.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var bottleStartX:int = 172;
var bottleStartY:int = 303;
var bottleEndX:int = 520;
var bottleEndY:int = 175;
bottle.buttonMode = true;
bottle.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
bottle.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var bananaStartX:int = 113;
var bananaStartY:int = 123;
var bananaEndX:int = 522;
var bananaEndY:int = 22;
banana.buttonMode = true;
banana.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
banana.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var napkinStartX:int = 248;
var napkinStartY:int = 271;
var napkinEndX:int = 520;
var napkinEndY:int = 175;
napkin.buttonMode = true;
napkin.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
napkin.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var yogurtStartX:int = 27;
var yogurtStartY:int = 136;
var yogurtEndX:int = 518;
var yogurtEndY:int = 329;
yogurt.buttonMode = true;
yogurt.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
yogurt.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var strawberryStartX:int = 120;
var strawberryStartY:int = 285;
var strawberryEndX:int = 522;
var strawberryEndY:int = 22;
strawberry.buttonMode = true;
strawberry.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
strawberry.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var sandwichStartX:int = 7;
var sandwichStartY:int = 364;
var sandwichEndX:int = 522;
var sandwichEndY:int = 22;
sandwich.buttonMode = true;
sandwich.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
sandwich.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var juiceStartX:int = 88;
var juiceStartY:int = 347;
var juiceEndX:int = 518;
var juiceEndY:int = 329;
juice.buttonMode = true;
juice.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
juice.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var foilStartX:int = 39;
var foilStartY:int = 416;
var foilEndX:int = 520;
var foilEndY:int = 175;
foil.buttonMode = true;
foil.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
foil.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
var waxbagStartX:int = 235;
var waxbagStartY:int = 342;
var waxbagEndX:int = 522;
var waxbagEndY:int = 22;
waxbag.buttonMode = true;
waxbag.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
waxbag.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
function startDragging (e:MouseEvent) {
e.currentTarget.startDrag();
function stopDragging (e:MouseEvent) {
e.currentTarget.stopDrag();
switch (e.currentTarget) {
case apple:
if (apple.x < appleEndX - offset || apple.x > appleEndX + offset || apple.y < appleEndY - offset || apple.y > appleEndY + offset) {
apple.x = appleStartX;
apple.y = appleStartY;
else {
apple.x = appleEndX;
apple.y = appleEndY;
//checkGame();
break;
case sandwich:
if (sandwich.x < sandwichEndX - offset || sandwich.x > sandwichEndX + offset || sandwich.y < sandwichEndY - offset || sandwich.y > sandwichEndY + offset) {
sandwich.x = sandwichStartX;
sandwich.y = sandwichStartY;
else {
sandwich.x = sandwichEndX;
sandwich.y = sandwichEndY;
//checkGame();
break;
case orange:
if (orange.x < orangeEndX - offset || orange.x > orangeEndX + offset || orange.y < orangeEndY - offset || orange.y > orangeEndY + offset) {
orange.x = orangeStartX;
orange.y = orangeStartY;
else {
orange.x = orangeEndX;
orange.y = orangeEndY;
//checkGame();
break;
case strawberry:
if (strawberry.x < strawberryEndX - offset || strawberry.x > strawberryEndX + offset || strawberry.y < strawberryEndY - offset || strawberry.y > strawberryEndY + offset) {
strawberry.x = strawberryStartX;
strawberry.y = strawberryStartY;
else {
strawberry.x = strawberryEndX;
strawberry.y = strawberryEndY;
//checkGame();
break;
case napkin:
if (napkin.x < napkinEndX - offset || napkin.x > napkinEndX + offset || napkin.y < napkinEndY - offset || napkin.y > napkinEndY + offset) {
napkin.x = napkinStartX;
napkin.y = napkinStartY;
else {
napkin.x = napkinEndX;
napkin.y = napkinEndY;
//checkGame();
break;
case bar:
if (bar.x < barEndX - offset || bar.x > barEndX + offset || bar.y < barEndY - offset || bar.y > barEndY + offset) {
bar.x = barStartX;
bar.y = barStartY;
else {
bar.x = barEndX;
bar.y = barEndY;
//checkGame();
break;
case juice:
if (juice.x < juiceEndX - offset || juice.x > juiceEndX + offset || juice.y < juiceEndY - offset || juice.y > juiceEndY + offset) {
juice.x = juiceStartX;
juice.y = juiceStartY;
else {
juice.x = juiceEndX;
juice.y = juiceEndY;
//checkGame();
break;
case foil:
if (foil.x < foilEndX - offset || foil.x > foilEndX + offset || foil.y < foilEndY - offset || foil.y > foilEndY + offset) {
foil.x = foilStartX;
foil.y = foilStartY;
else {
foil.x = foilEndX;
foil.y = foilEndY;
//checkGame();
break;
case banana:
if (banana.x < bananaEndX - offset || banana.x > bananaEndX + offset || banana.y < bananaEndY - offset || banana.y > bananaEndY + offset) {
banana.x = bananaStartX;
banana.y = bananaStartY;
else {
banana.x = bananaEndX;
banana.y = bananaEndY;
//checkGame();
break;
case bottle:
if (bottle.x < bottleEndX - offset || bottle.x > bottleEndX + offset || bottle.y < bottleEndY - offset || bottle.y > bottleEndY + offset) {
bottle.x = bottleStartX;
bottle.y = bottleStartY;
else {
bottle.x = bottleEndX;
bottle.y = bottleEndY;
//checkGame();
break;
case waxbag:
if (waxbag.x < waxbagEndX - offset || waxbag.x > waxbagEndX + offset || waxbag.y < waxbagEndY - offset || waxbag.y > waxbagEndY + offset) {
waxbag.x = waxbagStartX;
waxbag.y = waxbagStartY;
else {
waxbag.x = waxbagEndX;
waxbag.y = waxbagEndY;
//checkGame();
break;
case cup:
if (cup.x < cupEndX - offset || cup.x > cupEndX + offset || cup.y < cupEndY - offset || cup.y > cupEndY + offset) {
cup.x = cupStartX;
cup.y = cupStartY;
else {
cup.x = cupEndX;
cup.y = cupEndY;
//checkGame();
break;
case yogurt:
if (yogurt.x < yogurtEndX - offset || yogurt.x > yogurtEndX + offset || yogurt.y < yogurtEndY - offset || yogurt.y > yogurtEndY + offset) {
yogurt.x = yogurtStartX;
yogurt.y = yogurtStartY;
else {
waxbag.x = waxbagEndX;
waxbag.y = waxbagEndY;
//checkGame();

Some questions:
1. Can I specify more than one End x,y location for a draggable sprite?
yes, use an if-else statement
I'm creating a lesson to teach kindergartners how to sort lunchroom waste. If they have a napkin, for example, it could either go into the compost OR into the recycling. In cases like this where an item could really be placed into more than one bin, I want them to get it right if they do either of those things, rather than forcing them to choose which one.
2. To make my project more "fun" for kids, I wanted to customize the cursor with a graphic of hand. When I tried this in the flash file it works perfectly until I add the drag and drop functionality for the wasted items. Then the cursor will more around but not pick up any items. Once I revert back to the standard pointer, the correct drag and drop functionality is restored.
assign your cursor's mouseEnabled property to false:
yourcursor.mouseEnabled=false;
3. I have it set to snap back to the original location if learner attempts to drop the item on the wrong target. I want to be able to play a sound file when that happens, as well as play a sound file when it lands on the correct target, as well as shrink the item and change its opacity so that it appears invisible. I want to give the illusion of it being placed into the bin. I have no idea as to the proper way to code these events so that they happen.
use the sound class to create a sound:
// initialize your correct sound once with
var correctSound:Sound=new CorrectSound(); // add an mp3 sound to your library and assign it class = CorrectSound
// apply the play() method everytime you want your sound to play:
correctSound.play();
// change an object's opacity:
someobject.alpha = .3; // partially visible
someobject.alpha = 1; // fully visible
someobject.visible=false; // not visible, at all.
// change an object's scale
someobject.scaleX=someobject.scaleY=.5; // shink width and height by 2
someobject.scaleX=someobject.scaleY=1; // resize to original
4. I've watched dozens of hours of youtube tutorials before coming here. I'm a quick study, but am very new to action script. In one of the videos the developer showed referencing an external action script file which I don't think is an option in CC. The coding method he used seemed much more streamlined and "clean" than the chunks I'm working with now. Is there an easy way for me to code information about these objects than the way I've got it here now? I hate starting new things with bad habits. The perils of self-teaching.
you could google:
actionscript 3 class coding
actionscript 3 object oriented programming
p.s. you can simplify and streamline your coding by learning about arrays and using hitTestObject.

My mp4 movie files used to transfer from computer to iPad but now they will not Tried dragging and dropping to iTunes library but won't work anymore Plse help

I have mp4 movie files that i am trying to transfer to my ipad and it will no longer work. They will not copy to my iTunes library. I used to be able to transfer/drag and drop converted movies to my iTunes are the mp4 files maybe too big Although I have plenty of space

Howdy Anastasia,
I was thinking about why the songs arent importing and I feel that its either, A) the format of the files has changed since you last imported them, or B) you may need to rebuild the iTunes library.
Here is an article about doing just that:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Re-creating the iTunes Library file
Note: After re-creating your library, any devices that you sync with iTunes (Apple TV, iPod, iPhone, iPad) will see your iTunes library as a new library and will completely resync. The next sync with such a device will take longer and may reset some options since your rebuilt library isn't familiar to the device.
1. Quit iTunes.
2. Locate your iTunes folder (this is the folder that contains the iTunes Library and iTunes Library.xml files).
Operating System
Default location of iTunes Folder
Mac OS X
/Users/[your username]/Music
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\
Microsoft Windows Vista
\Users\[your username]\Music\
Microsoft Windows 7
\Users\[your username]\My Music\
3. Open your iTunes folder.
4. Drag the "iTunes Library.xml" or "iTunes Music Library.xml" file to the Desktop. If neither is available, learn how to add files back to the Library (because the XML file is not available, playlists and other information will not be available).
5. Drag the following file from your iTunes folder to the Trash:
Mac OS X
"iTunes Library" or "iTunes Library.itl"
Microsoft Windows
"iTunes Library.itl"
6. Open iTunes.
Important: Do not add any content into iTunes at this point (such as by purchasing something from the iTunes Store).
7. Choose File > Library > Import Playlist.
8. Navigate to the "iTunes Library.xml" file on the Desktop.
Mac users: Click Choose.
Windows users: Click Open.
If your Podcasts list in iTunes is empty after following these steps, learn how to add them back into iTunes.
Regards,
Sterling

I use to drag and drop an web address into a link toolbar, can't seem to figure out how to do this...?

I just upgraded to Windows 7 and with it I got the latest Firefox. There is nothing like learning 2 things at one time. On my old XP and 3.? all I have to do was drag and drop a web address into a link toolbar. Saving all my frequent visited or just sights I want quick access to, to a toolbar quick button. I have been playing with this for days and decided to try this Forum. I did find the Bookmark toolbar, but cant seem to figure out what is if for or if you can drop into it. When I right click it and Customize, it shows me add on buttons, but nothing to do with web addresses or alike...
Bottom line; I want to be able to drag and drop a web address into a toolbar for recall latter and be able to edit the address with a right click at a latter date in necessary...
Thanks, Mike

You can drag and drop the favicon also known as the [https://support.mozilla.com/en-US/kb/Site+Identity+Button site identity button], at the left hand edge of the location bar onto a toolbar to bookmark the site.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

I can no longer drag and drop things in Photoshop Elements 12. I can move things with my keyboard, but not my mouse. WHAT IS HAPPENING?!

When I got Elements 12 (May 2014), I was able to drag and drop things such as cut/pasted items, watermarks, etc. As of 2 weeks ago, I can no longer use my mouse to drag and drop. If I try, it just snaps back wherever it was before I tried to drag it. With that said, the item will move if I use my keyboard. It takes an eternity. WHAT IS GOING ON?! I just really want to use my mouse again...

Install the 10.10.1 update. That should do it.

Drag and drop files on TC then system message : you can't do that...

Hi everybody,
I looked for an answer in existing topics but i found nothing which concerns me. So can you help me to solve the following problem :
Until now, i use my TC 3To as a back-up system with TM (actual free space : more than 2To). Now, in more, i would like to share movies (for example) by "drag & drop" them on my TC. In this way, all my family could watch them on their Mac or PC from the TC. But when i try to drag and drop a file on my TC, the system shows me a message as which I cannot do that. Do you know why?
Also i can't create a folder next to the existing data one on my TC. I don't know why because everybody say that we can use TC to make TM back-up and to share files at the same time...
Thanks for your answer and please explain me exactly what i have to do. I know that if i put files on the TC hard drive, i risk to lost them if a problem happen.

Is Enable File Sharing checked in Airport Utility -> Your Time Capsule -> Edit-> Disks ?
Hope this helps.

I desperately to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in in library but the folder is empty. Can anybody help me?

I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?

I looked for plugs in in my library but the folder internet plugs in is empty

If i use Ps5 the order lasso, drag and drop or letters the win vista crashes down. Can anybody help?

Similar Messages

Maybe you are looking for