If I've installed an app from the app store and the author's distribution certificate expires, my app will still run or not? Thanks a lot.
If I've installed an app from the app store and the author's distribution certificate expires, my app will still run in my device or not?
For example in the case that the author won't renew the certificate itself, i guess his app will be removed from the app store; but what happens to the apps installed in the devices?
Thanks a lot.
The author's certificate is only used to authenticate the author when the app is uploaded to the app store.
The app is then signed by Apple before being added to the app store.
Nothing will happen to your app except you won't get any updates.
Evertually, iOS upgrades could stop the app from working if you upgrade iOS beyond what the app supports.
Similar Messages
-
Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the safari extension gallery. Appreciate any advice?
but i've not been able to install any programs from the safari extension gallery
In order to use the Safari Extensions Gallery you need to upgrade to Snow Leopard v10.6
See system requirements here: http://www.apple.com/safari/download/
If you want to upgrade to v10.6, make sure your Mac meet's Snow Leopard's - Technical Specifications
Purchasing available here > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.) -
i recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) and there was a CLICK HERE BUTTON , when i press on it it take me a to a page that require some kind of activation code or smthn like that ,
how can i authorize the device ?
and btw i bought it from UAE store
IOS 4.3.2You should only make purchases for all your devices using a single Apple ID. There is no need, and indeed a good reason not to, set up a new Apple ID with each new device purchase. While items purchased under different IDs can be played on a single device, you cannot merge Apple IDs and it makes it cumbersome.
Apple IDs do not expire but may become dormant and require reactivation if they are not actively used.
You should make note of your Apple ID and passwords and keep a record of it. Like a bank account it contains access to items with value. Update your Apple ID email address as they change.
I see you were guided to this forum by a help page on recovering your password. If that is not sufficient try the links below. Apple will need to verify you are indeed to owner of the accounts to which you are trying to gain access.
http://www.apple.com/support/appleid/contact/
Contact Apple for help with Apple ID account security - http://support.apple.com/en-us/HT5699 "This article provides country-specific Apple Support contact information for customers seeking help with their Apple ID password or other security-related issues."
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
How to install archlinux2008.6 from the hard drive?
How to install archlinux2008_6 by archlinux2008_6_i686.iso in hard drive?
i get the booting files(archlive.img,vmlinuz26) in the archlinux2008_6_i686.iso and put them in c:\
in the grub command mode the use of these code:
root (hd0,0)
kernel (hd0,0)/vmlinuz26
initrd (hd0,0)/archlive.img
boot
i get those from : http://blog.chinaunix.net/u/31909/showart_1121360.html
but it stopped , some code printing on the screen...................it can not continue..
from the google i find :"this method must use the "vmlinz "and the "initrd.img",this files is from archlinux2008.03.iso
i don't understand .......
i must download the archlinux2008.03.iso?...........it's too much trouble.
How to install archlinux2008.6 from the hard drive? or who could give me the two files (the "vmlinz "and the "initrd.img") from archlinux2008.03.iso?
e mail: [email protected]
THS.
--------this is my topic for the first time in english, I hope that you can know what i said ~~~
Last edited by 自学linux (2008-08-29 03:14:54)自学linux wrote:
http://blog.chinaunix.net/u/31909/showart_1121360.html
A waste of CD-ROM...........,in china, many people install linux just by iso,don't burn the iso,
could you give me the two files (the "vmlinz "and the "initrd.img") in archlinux2008.03.iso, those can't find in archlinux2008.06.iso
my email :[email protected]
Do you have a USB stick you could copy the image to? Where I live, a CD costs $0.50 at most. To put that into perspective. A coffee costs a $1.00. Either a CD costs a lot more than a coffee where you live or are you telling me you'd rather get a lot of grey hair than buy half a coffee?
Sorry I can't be of much help. I don't know how to do this method of installation. If you're desperate, you could try making an extra partition, and trying something with that. Take a look at these:
http://wiki.archlinux.org/index.php/Fas … nux_System
http://wiki.archlinux.org/index.php/Ins … her_distro
Last edited by solarwind (2008-08-27 04:37:59) -
I am not able to install screen-git from the aur
So yeah, i cant install screen-git from the aur. Im using yaourt.
┌─[yamifrankc]──(~)
└─| % > aur -S screen-git
==> Resuming previous build
==> Downloading screen-git PKGBUILD from AUR...
tar: Record size = 13 blocks
==> Last 5 comments ordered by date (asc):
Comment by: dolby on Tue, 16 Jun 2009 15:02:25 +0000
GNU screen shouldnt depend on libelf. Package in extra now doesnt.
See http://bugs.archlinux.org/task/14700
Comment by: dolby on Tue, 16 Jun 2009 15:03:08 +0000
Oh yeah, gpm isnt a dependency either.
Comment by: nihathrael on Tue, 16 Jun 2009 16:23:56 +0000
Thanks for the pointers. Package updated.
Comment by: firecat53 on Tue, 16 Jun 2009 23:19:28 +0000
At least for x86_64, libelf seems to be a dependency. Throws an error about libelf.so.0 when starting screen if it's not installed.
Comment by: Ranguvar on Sun, 11 Oct 2009 04:00:10 +0000
The three lines at the end of the install scriplet are unnecessary now and can cause problems apparently, please remove :)
Also, I cannot confirm libelf dependency, both by using ldd and trying removing libelf, so it should be kept out.
First Submitted: Sun, 09 Nov 2008 15:43:42 +0000
screen-git 20090616-1 : GNU Screen from GIT repository. Provides vertical splitting.
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add EDITOR to your environment variables
for example:
==> Edit PKGBUILD with:(replace gvim with your favorite editor)
==> Edit screen.install with:vim
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of screen-git ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for screen-git:
==> Building and installing package
mkdir: cannot create directory `/var/abs': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/screen-git directory. Using /tmp directory
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> Determining latest git revision...
-> Version found: 20091204
==> Making package: screen-git 20091204-1 i686 (Fri Dec 4 07:43:16 CST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found screen.pam in build dir
==> Validating source files with md5sums...
screen.pam ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to GIT server....
Already up-to-date.
==> The local files are updated.
==> GIT checkout done or server timeout
==> Starting make...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure: WARNING: unrecognized options: --with-sys-screenrc
this is screen version 4.1.0
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for library containing strerror... none required
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gawk... gawk
checking for a BSD-compatible install... /bin/install -c
configure: checking for buggy tools...
- sh is 'GNU bash, version 4.0.35(2)-release (i686-pc-linux-gnu)'.
- sed is 'GNU sed version 4.2.1'.
checking if a system-wide socket dir should be used... yes
checking for the socket dir... (eff_uid ? "/tmp/uscreens" : "/tmp/screens")
configure: checking for MIPS...
configure: checking for Ultrix...
configure: checking for butterfly...
configure: checking for POSIX.1...
- you have a POSIX system
configure: checking for System V...
configure: checking for sequent/ptx...
configure: checking SVR4...
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
configure: checking for Solaris 2.x...
configure: checking BSD job jontrol...
- you have jobcontrol
configure: checking setresuid...
configure: checking setreuid...
configure: checking seteuid...
configure: checking select...
configure: checking fifos...
- your fifos are usable
configure: checking for broken fifo implementation...
- your implementation is ok
configure: checking sockets...
- your sockets are usable
configure: checking socket implementation...
- you are normal
- both sockets and fifos usable. let's take sockets.
configure: checking select return value...
- select is ok
configure: checking for tgetent...
configure: checking libcurses...
- you use the terminfo database
configure: checking ospeed...
configure: checking for /dev/ptc...
configure: checking for SVR4 ptys...
checking for getpt... yes
configure: checking for ptyranges...
configure: checking default tty permissions/group...
checking for write... /usr/bin/write
checking for xterm... /usr/bin/xterm
- pty mode: 0620, group: 0
configure: checking getutent...
configure: checking ut_host...
checking utempter.h usability... no
checking utempter.h presence... no
checking for utempter.h... no
configure: checking for libutil(s)...
configure: checking getloadavg...
assuming posix signal definition
configure: checking for crypt and sec libraries...
configure: checking crypt...
configure: checking IRIX sun library...
configure: checking syslog...
configure: checking wait union...
configure: checking for termio or termios...
configure: checking getspnam...
configure: checking getttyent...
configure: checking fdwalk...
configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
checking for long file names... yes
checking for vsprintf... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for setenv... checking for nl_langinfo(CODESET)... yes
checking for library containing gethostname... none required
checking for rename... yes
checking for fchmod... yes
checking for fchown... yes
checking for strerror... yes
checking for lstat... yes
checking for _exit... yes
checking for utimes... yes
checking for vsnprintf... yes
checking for getcwd... yes
checking for setlocale... yes
checking for strftime... yes
checking for PAM support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default commands
configure: WARNING: unrecognized options: --with-sys-screenrc
Now please check the pathnames in the Makefile and in the user
configuration section in config.h.
Then type 'make' to make screen. Good luck.
CPP="gcc -E -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"'" srcdir=. sh ./osdef.sh
AWK=gawk CC="gcc -march=i686 -mtune=generic -O2 -pipe" srcdir=. sh ./comm.sh
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe screen.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe ansi.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe fileio.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe mark.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe misc.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe resize.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe socket.c
In file included from socket.c:51:
extern.h:159: error: conflicting types for 'execvpe'
/usr/include/unistd.h:585: note: previous declaration of 'execvpe' was here
make: *** [socket.o] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build screen-git package
Vertical split is ftw! What can i do to build it?yeah, i also got that message.
for vertical split you can go for screen-vs package. this is screen with the vs patch.
http://aur.archlinux.org/packages.php?ID=6006 -
I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address: 192.168.0.16
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Sat Apr 05 12:21:08 2014
Lease Expires: Sat Apr 05 13:21:08 2014
DNS Servers: 68.105.28.12
68.105.29.12
68.105.28.11
Adapter Name: {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number: CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install -
I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?
Font Management in OS X
-
Erasing and installing plug ins from the internet
erasing and installing plug ins from the internet?
What plug-in what browser??
FireFox>Tools>Add-ons>Plug-ins, etc
Safari>Preferences>Extentions
Safari>Help>Installed Plug-ins -
Installed Illus CS6 from the adobe site on my laptop but Illus install will not accept my Serial
Installed Illus CS6 from the adobe site on my laptop but Illus install will not accept my Serial # and not design and web premium CS6 is list in the serial# match drop down box
Go here and scroll down to Still need help? Sign in for support:
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
work your way through the links there and just keep going, even when it looks like a page you've already been on, and you will be able to start a chat session and get it straightened out. -
Can I install Pages only from the iwork '09 suite
Hi new to MAC and happy with office mac 2008 except like the features and versitility of pages. can I install this only from the suite???
Many thanksYou can't choose to just install Pages. You will have to install all three applications.They together are only 700 Mb in the Application folder. Of course you can afterwards delete Keynote and Numbers if you like.
-
I am trying to install photoshop elements from the shop bought card. After I put in redemption code the yellow line came up with "redemption is not available at the moment". What do I do? Please help! Many thanks
There's been a few of these today. I think there must be a problem with the redemption server and you probably just need to wait a while and try again.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
I can't install Flash Builder from the Web Premium suite, what should I do?
I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
Please advise as to what can be done to be able to download this specific program.
Thanks,
Sarah-Kayok,
so for the memory: it's 4 GB 1067 MHz DDR3 and when I click to
install the programs it says (Macintosh HD: 10,0 Go (459,5 Go
disponible).
As for the processor: it's 2.66 GHz Intel Core 2 Duo
Monitor resolution: 1920 x 1200
Le 12-02-28 à 17:35, Jeff A Wright a écrit :
Re: I can't install Flash Builder from the Web Premium suite, what
should I do?
created by Jeff A Wright in Downloading, Installing, Setting Up -
View the full discussion
We do still need more information such as how much memory you have,
resolution of your monitor, how much disk space you have free, which
processor are you using. I good guide is to look at the system
requirements and try to post for each of the items within the
requirements. The system requirements for Web Premium can be found
at http://www.adobe.com/products/creativesuite/web/tech-
specs.edu.html.
>
Also you can find this information within your System Profiler. The
easiest way to access the system profiler is to go to the Apple Menu
and select About this Mac. Once selected clicking on the more info
button will launch the System Profiler.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by
email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746 -
What happens to Apps when the Distribution certificate expires?
Our distribution certificate expires in mid March. Do I have to re-build all the apps that are on the App Store with the new certificate or will they continue to install without issues?
My gut feel is that Apple would not expect developers to re-submit all their apps just because the certificate has expired but like a confirmation from someone since I am sure many have crossed this bridge.
Thanks in advance.
-TRS+>I assume that any new submissions will have to have to be built with a profile which includes a valid certificate.+
Of course....just follow the money
It is a solid process, but of course Apple, like any business that operates around time-based/recurring fees, wants to get the 'subscriber' to re-up sooner than later.
The countdown in the dev center, etc. we see about our 'expiration' date is meant not only as a friendly reminder concerning whatever risk, it is a prod to get whatever monies out of our pockets and into theirs...sooner than later -
I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file".
Then it shows as downloading failed.But if I click on it twice ,it opens up .
this has started happening since last week.Before this ,it never happened.
Please suggest what has gone wrong somewhere and how can I rectify it.Please install the following add-on to see if it helps.
https://addons.mozilla.org/en-US/firefox/addon/pdfjs/
Maybe you are looking for
-
Problem in data source mapping - CAF entity service.
Hi, I created an external service for the bapi given below. It has 2 tables as input parameters. In entity service I created attributes(for input parameters) for table1 and table2. but in data source i couldn't map more than one attribute to the MATN
-
HT1386 cant get my iphone to link with itunes and it will not open
i tried to reset my iphone and it will not work anymore how do i reset to factory
-
HOW to include the needed libraries to be copied into the self-cotained app
I'm using: Netbeans 7.2, JavaFX 2.2, JDK 7u7. First, I believe the instructions posted at http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm#A1349508 are off (when dealing with NetBeans, at least), as the resulting bundle copies
-
Just wondering if anyone knows how to round up a double so that for instance 100.232323 can be up to 100. This is due to trying to convert a price in pence to a meaningful price. Also is there anyway to represent a figure in pounds and pence??? Regar
-
Hi The 3d graph control is everything I could want for my application with one exception! When you rotate a graph, the text for the axes becomes reversed. I have seen other controls that handle this but the NI version does not seem to have an option