If I want to keep the quality of the original captured footage(from the tapes),what format should I?

I captured canon hv20 by firewire to my computer with adobe premiere elements 11. After capture, I have cutted clip three times. Then I want to export my computer because of I watch on my 46 inches full hd lcd television. If I want to keep the quality of the original captured footage (from the tapes), what format should I? I choosen mpeg 1440x1080i 24, it alerts error. Or i chosee avchd 1920x1080p, then it is too larger than captured scenes. I think it is 20000MB but captured scened (without cut) only 11.2 gb. Please help me. Thanks very much.

YCLCS
File size and Bitrate and Quality are interrelated. From what I have read, the bitrate for your HDV footage from the PAL Canon HV20 camcorder should be about 25 Mbps (megabits per second). If you did a HDV data capture firewire into Premiere Elements, you should MPEG2.mpg file on the Timeline.
When you did your export
Publish+Share
Computer
MPEG
using Presets = MPEG2 1440 x 1080i25, did you make any changes in the settings under the Advanced Button/Video Tab of the preset?
When you look at the settings in the Export Settings dialog for the MPEG 1440 x 1080i25 preset, you will see the default bitrate settings
Minimum = 18 Mbps
Target = 25 Mbps
Maximum = 30 Mbps
The program's export bitrate may be higher than that of your source media, resulting in the increased file size. You can check out the bitrate, using the properties readout from a free program such a MediaInfo
http://mediainfo.sourceforge.net/en
You could experiment with different bitrate, trying to maintain the quality as you decrease the maximum bitrate from 30 Mbps downward to reduce the file size.
The file extension of your export should be .m2t, .mpg. So, your export is MPEG2.m2t. I find that that type of file will playback in Windows Media Player, but not QuickTime (latest version). This particular export would be the closest to the source media properties.
But, right now I would try to perfect the MPEG2 1440 x 1080i25, experimenting with the bitrate to bring the file size into line with the source file and still maintain video quality. The AVCHD.mp4 suggested by Ann Bens is a prime candidate quality wise. If size becomes a factor, you might want to explore a 1920 x 1080i25 or 1440 x 1080i25 Windows Media Video 9.wmv file which we can discuss in more detail depending on how things are going.
Please review the above and then let us know how we can help.
Thanks.
ATR

Similar Messages

I have a classic iPod with songs that were put on it from a different computer. If I plug it up to my computer, will it keep the songs that were originally on it from the previous computer AND allow me to put new songs on it from my computer?

I have a classic iPod with songs that were put on it from a different computer. If I plug it up to my computer, will it keep the songs that were originally on it from the previous computer AND allow me to put new songs on it from my computer?

No. Your iPod is designed to sync with one computer/iTunes library at a time. If you try to sync it with a new computer/iTunes library, the contents currently on the iPod will be erased and replaced with content from the new library. So you'll want to copy what is currently on the iPod over to your new iTunes library first before syncing it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

What is the best way to remove footage from the middle of a clip?

What is the best way to remove unwanted footage from the middle of a clip? I have a clip that I've trimmed from the start and finsih, but I need to remove "boring" footage from inbetween.

Thank you for your replies. I tried the blade tool followed by select and delete but it did not seem very precise. I had better success with this aproach at the ends rather than in the middle. I watched a tutorial video on using the precision editor, but the video was small so I had a difficult time following where the person clicked, etc. Any info on using the precision editor would be greatly appreciated. I need to make precise cuts to avoid creating unatural motion for the subject. So far, close but no cigar.
Regards,
Michael

Unwanted events are also logged in the view created for a specific target from the rules created using its base target

I have created Event or Alert view using a target "My.Target" which is derived from a base target "Windows Server".
All the events or alerts are captured correctly from the servers discovered by "My.Target" but the same view also shows the events and alerts from other servers which has a rule created with a base target "Windows Server".
Is there any option to filter the base target at view level other than using a custom field as it doesn't work for the alerts generated using "Monitors".
Any help would be greatly appreciated.
Thanks in advance.

There is a class "My.Servers" derived from "Microsoft.Windows.Server.Computer" as below -
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="My.Servers" Accessibility="Public" Abstract="false" Base="MicrosoftWindowsLibrary!Microsoft.Windows.Server.Computer" Hosted="false" Singleton="false" Extension="false">
<Property ID="Name" Type="string" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" />
</ClassType>
</ClassTypes>
</EntityTypes>
</TypeDefinitions>
There is a discovery "MyServersDiscovery" to discover servers with presence of some registry key as below -
<Monitoring>
<Discoveries>
<Discovery ID="MyServersDiscovery" Enabled="true" Target="MicrosoftWindowsLibrary!Microsoft.Windows.Server.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="My.Servers">
<Property TypeID="My.Servers" PropertyID="Name" />
</DiscoveryClass>
</DiscoveryTypes>
<DataSource ID="Name.AttributeDiscovery" TypeID="MicrosoftWindowsLibrary!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>$Target/Property[Type="MicrosoftWindowsLibrary!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>Name</AttributeName>
<Path>SOFTWARE\MyRegKey</Path>
<PathType>0</PathType>
<AttributeType>0</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>300</Frequency>
<ClassId>$MPElement[Name="My.Servers"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftWindowsLibrary!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="MicrosoftWindowsLibrary!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="SystemLibrary!System.Entity"]/DisplayName$</Name>
<Value>$Target/Property[Type="SystemLibrary!System.Entity"]/DisplayName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="My.Servers"]/Name$</Name>
<Value>$Data/Values/Name$</Value>
</Setting>
</Settings>
</InstanceSettings>
</Expression>
</DataSource>
</Discovery>
</Monitoring>
Created 2 views "My.Alert.View" and "My.Event.View" with Target "My.Servers" as below -
<Presentation>
<Views>
<View ID="My.Alert.View" Accessibility="Public" Enabled="true" Target="My.Servers" TypeID="SystemCenter!Microsoft.SystemCenter.AlertViewType" Visible="true">
<Category>Operations</Category>
</View>
<View ID="My.Event.View" Accessibility="Public" Enabled="true" Target="My.Servers" TypeID="SystemCenter!Microsoft.SystemCenter.EventViewType" Visible="true">
<Category>Operations</Category>
</View>
</Views>
</Presentation>
The above views display events and alerts generated by rules targeted on the serves discovered with "MyServersDiscovery" correctly.
The major issue here is - if there is a rule in same or any other management pack for which the target is "Windows Server", the alert or event generated by that rule is also shown in these views which is not expected.
It seems it is because the target for "My.Alert.View" and "My.Event.View" is "My.Servers" which is dervied from "Microsoft.Windows.Server.Computer" so by default all the rules targeted on its base class "Microsoft.Windows.Server.Computer" are also visible
here.
Is there any way to avoid this?

Why would I want to change JPEG quality of photos when exporting them from iPhoto?

Why would I want to change JPEG quality of photos when exporting them from iPhoto? Changing the quality of the print changes the size of the saved file and thus impacts the speed at which it is moved on the internet. But other than size of the file, what is the advantage of changing the quality?

I have no idea why you would want to do anything
Some people want lower quality to reduce file size for different reasons
It is an option - if you do pot want to do that do not use that option
LN

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

HT5622 how can I find what the charges aree to my credit card from the apple store? I get multiple charges every month and don't know what they are for...I want to cancel whatever is being charged to me...how do I do it?

how can I find what the charges aree to my credit card from the apple store? I get multiple charges every month and don't know what they are for...I want to cancel whatever is being charged to me...how do I do it?

Have a look at this link
http://support.apple.com/kb/ht2727

I reinstalled tiger on one iMac, but want to re-upgragde it to Lion. I don't have the discs anymore, but I installed Lion from the Mac App Store. Now that I'm back to 10.4, I don't have the App Store. I have a new iMac with Mavericks, but it won't let

I have a 2006 iMac that I've upgraded to each new os as they came out. I just wiped it (for the kids to use, I have a new iMac with Mavericks) and reintalled Tiger from the original discs. I want to get it back to Lion - which I purchased from the Mac App Store. But Tiger doesn't have the App Store and I don't have the discs anymore from the intermediate versions. I tried downloading Lion from the new iMac but it's not available...
Any ideas?

To get to the App Store, you need to upgrade the Tiger machine to Snow Leopard.

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace ?

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace my iPhone 5 ?

You would need to return to U.K. for warranty service. The iPhone warranty is not international.

I want to send my daughter in Australia a BT headset from the US, will there be a compatability problem?

I want to send my daughter in Australia a BT headset from the US, will there be a compatibilty problem?

There shouldn't be, at least not based solely on country. Bluetooth is a world-wide standard. Just confirm with the manufacturer that the headset you intend to purchase is compatible with the device (model, operating system, etc.) your daughter will be using it with. Don't assume that just because it's Bluetooth that it will work with everything.
Regards.

How does the quality of service in India compare to the United States?

I am currently in India and 12 hours from the closest Apple service center in Delhi. After the monsoon rains started my computer started acting up. At first some keys seemed to stick and I was able to solve the problem by attaching a USB keyboard. Lately the computer started crashing and then having trouble starting up again (an internet search suggests this could be a problem with the RAM). If I left the computer for a while it would start up and operate well for a bit but eventually crash again.
I took the computer into a computer repair shop here and he said that I should wait (3 months) until I go back to the United States rather than go through the trouble of traveling to Delhi to get the computer repaired. He also said that the quality of repairs is much better in the US. For example, in India they will put in second hard refurbished hardware whereas in the US they will use new hardware. The repairs in India will also take much longer than it would in the US. He recommended I get a cheap PC from him to use while I am here and get my mac repaired when i get back to the United States, he would then buy the computer back when I left.
I was wondering if anybody could share their experience or knowledge of the quality of service in India. Thank you.

And another quote from the fine manual:
Re Slideshow:
Rendering Preview Images
Aperture renders preview images in four situations:
When a library is upgraded—provided that the “Create previews for existing images” checkbox is selected in the Welcome to Aperture dialog
When an image is imported, or a version is created, rotated, or adjusted—provided that the Maintain Previews item is selected in the Library Action pop-up menu (with a gear icon)
When you Control-click the library, a project, or an image selection and choose Update Previews from the shortcut menu
Immediately before a slideshow, if the previews are not up to date, and the slideshow preset uses the Best quality setting
When rendering a group of preview images, Aperture uses the current application preference settings for compression quality and picture size, not the settings that were specified when preview rendering began. For example, if you have the quality set to 6, and then halfway through rendering you change the setting to 8, the previews that have not yet been rendered will be compressed at setting 8. Previously rendered previews are unaffected.
So, a high quality slideshow will require high quality previews, and indeed Aperture will render previews before rendering a slideshow, if the preview quality is not sufficient.
Regards
Léonie

Please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored.

If I want to keep the quality of the original captured footage(from the tapes),what format should I?

Similar Messages

Maybe you are looking for