If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

Have a look at Soundflower at this link:
http://www.macworld.com/article/1159440/soundflower_capture.html

Similar Messages

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Having an intermittent issue where my iMac blanks out on me. On restarting I get bands running down the screen with pixels jumping around, then the white screen of death and nothing... Wouldn't restart all weekend, now fine..? any ideas whats wrong?

Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

my total library is 680 mb, nowhere close to the 2.08 in the pictures folder. I am obviously messing up.
Actually you’re not.
The iPhoto Window reports the size of the library that would result if you exported all the current versions +and nothing else+ to a folder on the desktop.
The iPhoto Library Folder contains the Original, Modified and thumbnail versions of your pics. It also contains various cache and database files +all of which are necessary+ for the working of the Library.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
You can run a Library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

After a few hours of inactivity , my screen goes white with a flashing file folder in the centre with a question mark in the centre of said folder. at this point i can only unplug the computer for it to reboot properly, then it is fine till the next go..

After a few hours of inactivity, I return to find a white screen with a file folder in the center of the screen with a ? mark in the centre of said folder and both are flashing...am i compromised?

No
Solution may be found if you search in the "More Like This" section over in the right column.

Recording the screen with a video camera

Can someone help me be able to record everything on my screen to my video camera? Can I use a firewire to do so? Is there a specific application i require? What I DON'T want to do is record my screen straight to the computer (this will be processor/space intensive) plus I already know how to do that? Thanks in advance.

Welcome to the Forums!
I'm a little confused. You want to record your screen to your video camera? Point the camera at the screen and press record on the camcorder. Viola.
I suspect what you want to do is not that simple, but that's the answer to the question you asked
IF you have a recording device with a _video in_ (which is something that camcorders typically don't have!! - other than the lens, I mean...), you'd need to convert the video out - which is the DVI port.
So, if it were me, I'd use my DVI-to-video adapter, connect the DVI output to my DVR (the one on my TV), set the DVR to that input, and record that way.
Hope this helps...

When i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i

when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?

SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance.

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen

Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen and the existing stay minimized.
== This happened ==
Every time Firefox opened
== I think when a I updated or downloaded a newer version of FireFox at Firefox's suggestion.

Hmm that does sound a bit strange - I use a system quite similar to yours (XP, FF 3.6.3), and don't see this behaviour.
I would recommend trying to start Firefox in Firefox [[Safe Mode]] (make sure you close '''all''' running Firefox instances first), and see if this problem persists.
If not, it could be some add-on causing this behaviour - restart Firefox in Safe Mode, disable all add-ons, and enable them one by one to find the guilty one.
If it still happens in Firefox Safe Mode, some other program (or something in Windows itself) most likely is the cause. We may be able to help with this too, so let us know what works and provide as much additional information as possible to let us help you solve this.
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help other users with similar issues.

How to record you screen using quicktime with built in input line and microphone in the same recording?

i am using th quick time record your screen option and see (when on the audio selction) that you can only either record sound from your computer or from your microphone
is it possible to have it both on one recording?

The usual audio-in options on a laptop are None / Built-in Input: Line in / Built-in Microphone: Internal microphone. There's not an option to record system audio unless you've installed a third-party extension such as Soundflower.
In any event, if you're looking to combine audio inputs, check the Audio MIDI Setup help files (Applications > Utilities > Audio MIDI Setup). Search for "aggregate."

While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

We can't help you if you don't even know what you are installing. Never install anything if you do not know what it is. Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
That being said, it appears you attempted to upgrade to Mavarick. Although I am not positive.
Sorry, I am going to back out of this because I nor you know what it was you installed. Hopefully, someone else will chime in here.
GOOD LUCK!

How can I make an image (gif) go over the screen with javascript?

Hello,
I'm working on a website for an archery club. Everything works great but I want an arrow going from one side to the other on a certain moment.
I cannot find a script that works like I want. The image should start out of the screen and has to leave on the other side with a certain speed.
I'm not able to write such a script myself. I'm not certain how or when it should start but I can fix that in the script I guess.
Thanks for any help,
Regards,
Theo

Use jQuery with JSTween animation plugin.
http://www.jstween.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

How to show mouse clicks when recording screen with quicktime?

How can i show the mouse click when i record the screen using quicktime player?

Why? What program feature do you intend to offer, by knowing what a user clicks on (besides the application itself).Hi, well what I have to do is to start the application minimized in the system tray. Then the application must be listening for crtl+shift+left click in any part of the desktop or an opened application, when that happens, I have to show a window asking if the user want to take a screenshot starting in the x,y point he clicked, once done, I have to take an screenshot...so on.
How can I do that? Can anybody give me a hint? Thanks in advance.

My email on my iPhone 4 doesn't notify me of a new email until I actually go into my mail. My wife's iPhone 4 shows her on the home screen with a red number on the icon. Why is this?

My email on my iPhone 4 doesn't notify me of a new email until I actually go into my mail. My wife's iPhone 4 shows her on the home screen with a red number on the icon. Why is this?

You don't have push enabled. Go into your settings and enable it, however many people will want to advise you that doing so will reduce your battery life.

If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

Similar Messages

Maybe you are looking for