If install CSM in VMware which windows2003 version(32/64bit) supported?

CISCO will release CSM version 3.2.1 to support VMware ESX Server 3.5 in July 2008.For the SW requirement, which windows 2003 version (32 or 64bit)support by CSM3.2.1? Thanks

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Similar Messages

Which axi version is the supported and compatible version for JDK1.4?

Hi,
Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance.
Regards,
Lokesh Kumar Pattajoshi

Hi Jürgen
Please be advised that the customer is correct.
Please see the following note:
539188 TREX installations for E-Selling
For all E-Commerce and ICSS scenarios using
SAP Web Application Server Java 6.40 TREX 6.1. is recommended.
Hope this will be of assistance.
Kind regards Peter
Edited by: Peter Murphy on Jan 23, 2009 3:01 PM

Bought a movie via iTunes, tried playing it and was told that it "requires Quicktime, which this version doesn't support"

Bought a movie via iTunes, tried playing it and was told that it "requires Quicktime, which this version doesn't support". Any suggestions? Also why does iTunes sell a movie which you then cant watch!!!

Try restarting your iTunes in 32-bit mode, as per the following document:
iTunes 10.4 for Mac: Older media files may require iTunes to reopen in 32-bit mode

I had macbook pro and would like to install windows OS. Which window version is suitable 32bit or 64bit. And which window is common install in mac. Need helps

I had macbook pro and would like to install windows OS in it. I had install desktop parallel and need help which windows version is suitable. Windows vista, 7 or 8 and either 32 or 64 bit.

The answer is it depends on which model of MacBook Pro you have. This article has a table that shows you which versions of Windows you can install.
http://support.apple.com/kb/HT5634 (click 'MacBook Pro')

Which Soap version does Flex support

Hello,
I have a flex application trying to talk (via web service) to
a gSoap server.
If I send this:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<hpvcm:userLogIn xmlns:hpvcm="
http://hp.com/iss/net/vcm/resourceModel">
<hpvcm:username>Administrator</hpvcm:username>
<hpvcm:password>Administrator</hpvcm:password>
<hpvcm:breakLockedSession>false</hpvcm:breakLockedSession>
</hpvcm:userLogIn>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I get a Soap fault version mismatch.
I have an apache client that sends almost the exact same
thing, this:
<soap:Envelope xmlns:soap="
http://www.w3.org/2003/05/soap-envelope">
<soap:Body>
<ns1:userLogIn xmlns:ns1="
http://hp.com/iss/net/vcm/resourceModel"
xmlns:ns2="
http://hp.com/iss/net/vcm/resourceDomain"
xmlns:ns3="
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<ns1:username>Administrator</ns1:username>
<ns1:password>Administrator</ns1:password>
<ns1:breakLockedSession>false</ns1:breakLockedSession>
</ns1:userLogIn>
</soap:Body>
</soap:Envelope>
and I get a valid response this:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="
http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="
http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:c14n="
http://www.w3.org/2001/10/xml-exc-c14n#"
xmlns:wsu="
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
xmlns:ds="
http://www.w3.org/2000/09/xmldsig#"
xmlns:wsse="
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:hpvcm="
http://hp.com/iss/net/vcm/resourceModel"
xmlns:hpoa="hpoa.xsd" xmlns:hpvcd="
http://hp.com/iss/net/vcm/resourceDomain">
<SOAP-ENV:Body><hpvcm:userLogInResponse>
<hpvcm:HpVcmSessionKeyToken>
<hpvcm:vcmSessionKey>PCmB3HCKsiSkE9zIRytsaiTx</hpvcm:vcmSessionKey>
</hpvcm:HpVcmSessionKeyToken></hpvcm:userLogInResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
From what I can tell the only difference is this portion:
<soap:Envelope xmlns:soap="
http://schemas.xmlsoap.org/soap/envelope/">
BAD BAD BAD
<soap:Envelope xmlns:soap="
http://www.w3.org/2003/05/soap-envelope">
GOOD GOOD
The first is SOAP 1.1 the second 1.2
My WSDL specifies 1.2. But I cannot get Flex to send 1.2.
How can I tweak this?

Did you get this figured out because I think I'm having the same problem? I looked at your two requests and see that the soap envelope values are not the same, which is what is going on with me; that triggers the runtime soap mismatch error. Is something happening when it runs through a soap proxy (soap server)?

Vmware workstation 6.5.3 64bit Install problems

I'm having trouble installing the official Vmware Workstation 6.5.3 64bit bundle from vmware.com. The install always hangs at the Vmware Player configuration.
I've tried both the graphical install, using:
kdesu sh VMware-Workstation-6.5.3-185404.x86_64.bundle
and from the command line:
# sh VMware-Workstation-6.5.3-185404.x86_64.bundle --custom --console
I see no error messages, and the installers stop at the same place in both instances (configuring Vmware Player). The command line version reports the install to stop at 62%. I've left the install run while I was at work (all day), and nothing changed.
When I kill the installer using xkill or killall, I am able to use Player (although I can't run any vms in it), but workstation itself is not installed (I have no /usr/bin/vmware binary).
Any help would be appreciated.
I'm using kernel 2.6.30-ARCH. I cannot patch the modules because the install does not complete, before you ask.
Thank you.

My vmware install logs don't really help here but they do show where it trails off into oblivion:
Sep 06 21:47:10.011: app| Log for VMware Workstation pid=26637 version=6.5.3 build=build-185404 option=Release
Sep 06 21:47:10.012: app| Host codepage=UTF-8 encoding=UTF-8
Sep 06 21:47:11.081: app| Extracting the sources of the vmmon module.
Sep 06 21:47:11.117: app| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/2.6.30-ARCH/build/inc$
Sep 06 21:47:20.240: app| The vmmon module loads perfectly in the running kernel.
Sep 06 21:47:20.240: app|
Sep 06 21:47:20.265: app| Registering file: /usr/lib/vmware/installer/vmware-installer --register-file vmware-player regular /lib/modules/2.6.30-ARCH/misc/vmmon.o
Sep 06 21:47:20.616: app| Registering file: /usr/lib/vmware/installer/vmware-installer --register-file vmware-player regular /lib/modules/2.6.30-ARCH/misc/vmmon.ko
Sep 06 21:47:21.673: app| Extracting the sources of the vmnet module.
Sep 06 21:47:21.697: app| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/2.6.30-ARCH/build/inc$
Last edited by jebus (2009-09-06 18:51:34)

Hello. My safari (and i keep it updated) cannot open PDF files. Should i install Adobe Reader and which version????? I have Mac Book Pro running OS 10.9

My safari (and i keep it updated) cannot open PDF files.Should i install Adobe Reader and which version????/ I have Mac Book Pro running OS 10.9
Please help me!!!!

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Which DM Version to download and install?

Ready to upgrade OS from 4.2 to 4.5. Instructions say to download latest version of DM prior to installing 4.5 on PC.
Current DM version is 4.3. Available later versions -- 4.5, 4.6 and 4.7.
Which DM version should I download?
Thanks!
Message Edited by KGlennCole on 12-16-2008 03:09 PM
Solved!
Go to Solution.

There is a verision 4.7 that you can use
Message Edited by bbhorrigan on 12-16-2008 03:12 PM
If someone helped you give them kudos. Research all info!

Which Oracle version can i install on Windows 7 home premium edition?

Hi,
Can anyone please let me know Which Oracle version can i install on Windows 7 64 bit home premium edition?
Thanks in Advance,
Arun Kumar.
Edited by: 884258 on Sep 9, 2011 6:21 AM

Oracle database compatible for windows 7
Already asked and answered in these forums - pl use the search feature
HTH
Srini

I some how deleted iphoto. i have since tried to install 9.1.1 and cant because i says i need to install 4.0 first which i cant find. can somebody please tell me what to do and where to go. my mac is a 3,1 and am running version 10.5.1

can some body help me please!!!
i some how deleted iphoto. i have since tried to install 9.1.1 and cant because i says i need to install 4.0 first which i cant find. can somebody please tell me what to do and where to go. my mac is a 3,1 and am running version 10.5.1

reinstall iPhoto - go to your receipts folder ("Your hard drive" ==> library ==> receipts) and remove any iPhoto receipts and reinstall from the restore disks that came with your computer - do a custom install of bundled software only
For more information <a href="http://www.macworld.com/article/132243/2008/02/pacifist.html"> click here for the MacWorld article on reinstalling OS X applications.</a>
9.1. is an update and can only be installed if you have purchased iLife '11 on DVD or iPhoto '11 from the App store - and iPhoto '11 will not run on OS 10.5.8 - or 10.5.1
LN

WRT300N Firmware v0.93.9 - which upgrade version can I install?

I think I can upgrade my firmware, but I don't know which version.
The firmware version on the web interface says v0.93.9. But the version on the CD says 1.3. Neither of those choices are available when I go to the Download page at Linksys.
Can someone tell me which firmware version I can safely upgrade my router to?
Thanks.
KWilder

Your router is WRT300N V1...
Download Firmware 3.00 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Windows 8.1 64 bit installs 32 bit browser (Internet Explorer 11) but user would go on installing 64 bit programs which 32 bit browser (Internet Explorer 11) rejects, how to stop this?

For many days I searched for answer of how an Internet Explorer add-on installed because few websites won't run without it, but Windows OS or Internet Explorer itself won't allow install of these add-ons.
Please note following problems:
1. Windows 8.1 64 bit operating system installs 32 bit Internet Explorer 11, but this 32 bit Internet Explorer won't accept 64 bit add-ons which I tried to install for 64 bit Windows 8.1, incompatibility of 64 bit and 32 bit which
I knew already but didn't clicked even on posting forum questions not before 'ORACLE's message in yellow.
2. For 64 bit Windows I kept on trying to install 64 bit add-ons for Internet Explorer, which won't install or would send message 'Incompatible', once default installations of these add-on's are disturbed but not completely uninstalled, new installations
won't be entertained at all, only way is reinstall of Internet Explorer.
3. Therefore I installed Apple's 'Safari', which also displayed same messages, but allowed install of 'Quick Time', and now I listen to my favourite songs on a great sound system of a website.
4. Windows needs correction for this.
Best of Luck.

For many days I searched for answer of how an Internet Explorer add-on installed because few websites won't run without it, but Windows OS or Internet Explorer itself won't allow install of these add-ons.
Please note following problems:
1. Windows 8.1 64 bit operating system installs 32 bit Internet Explorer 11, but this 32 bit Internet Explorer won't accept 64 bit add-ons which I tried to install for 64 bit Windows 8.1, incompatibility of 64 bit and 32 bit which
I knew already but didn't clicked even on posting forum questions not before 'ORACLE's message in yellow.
2. For 64 bit Windows I kept on trying to install 64 bit add-ons for Internet Explorer, which won't install or would send message 'Incompatible', once default installations of these add-on's are disturbed but not completely uninstalled, new installations
won't be entertained at all, only way is reinstall of Internet Explorer.
3. Therefore I installed Apple's 'Safari', which also displayed same messages, but allowed install of 'Quick Time', and now I listen to my favourite songs on a great sound system of a website.
4. Windows needs correction for this.
Best of Luck.
Use the 32-bit version of IE. All rivals are 32-bit, no need for x64, a browser is not so big.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!
It's truly way bigger, handles much more memory, therefore should switch on x64 bit.

I book G4 will not boot up/want to re install but do not know the version??

My kid did something to our I book, and now it is stuck on a blank blue screen.
I have tried many different things, and now just want to re install the software
and hope for the best.. i got a disk from a friend of 10.4.. and after the language
it says cannot install.. Maybe this is the wrong version of Op Sys??
what to do.. maybe this is security issue..
I would buy a new op sys.. but do not know which one was used.. we bought the comp
on E bay.///
Help..

If the iBook G4 build model you have is among the last of their production,
(mid-2005) those shipped with a machine series-specific restore/install
DVD and an early retail version of Tiger 10.4 probably won't work.
The 'mid-2005' iBook G4 12/14" 1.33/1.42GHz
computers included Tiger, one of these:
Mac OS X 10.4.2 (8D37)
Mac OS X 10.4.4 (8G32)
A last-version retail install DVD Tiger 10.4.6 could work, but it would
not include the other software as-shipped with the iBook when new.
If your computer is a late-2004, it shipped with Panther 10.3.x
and any Tiger retail install DVD (not for a specific model) can
work so long as the computer build supports the OS X version.
And, an even older iBook (G3) may have shipped with a boot OS
X version on CD media, and not even have a Combo optical drive.
The first iBook G4 should have at least a Combo (dvd reader) drive.
• How to find the serial number of your Apple hardware product:
http://support.apple.com/kb/HT1349
You can check the iBook serial number against an online search
to find its build-date; then use that info to learn more about it.
• Decode a Mac's serial number:
http://www.appleserialnumberinfo.com/Desktop/index.php
• Identify your Mac - serial number model lookup:
http://www.powerbookmedic.com/identify-mac-serial.php
• Klantenservice: Serienummers
http://www.chipmunk.nl/klantenservice/applemodel.html
With the serial number information, if the computer is not
super old, it may still be possible to get a replacement set
of install discs from *Apple Sales 1-800-MY-APPLE* and if
they still can get you a duplicate or replacement set, there
would be a fee; you may get lucky, if it isn't too old a Mac.
A 'replacement set' would constitute an 'original' vintage set.
• Apple - Support - iBook:
http://www.apple.com/support/ibook/
You can check the build model run (ie: Late 2004, Early 2003, etc)
in this Apple warranty coverage page by using Serial number input:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
+Even if the computer is way out of warranty. This can help identify.+
The MacTracker D/L database of Apple product information,
general specs which may be helpful to identify configuration
& update a product, can be found here: http://mactracker.ca
However that works out...
Good luck & happy computing!
+{ edited }+

I have been using Aperture 3.3.2 with Mac OS-X 10.7.5. This version doesn't support RAW with Nikon D7100, I decided to upgrade to 3.4. On downloading, it tells me that to upgrade, I need Aperture Vers.3! which I have. What to do??

I have been using Aperture 3.3.2 with Mac OS-X 10.7.5. This version doesn't support RAW with Nikon D7100, so I decided to upgrade to 3.4. On downloading, it tells me that in order to upgrade, I need Aperture Version 3, which is what I have. What is one supposed to do??

Have you moved or renamed your Aperture 3 version? If it is not installed in the "Applications" folder or not named simply "Aperture", then Software Update will not recognize it.
Put Aperture back and "Software Update" should find your version.
Regards
Léonie

Installing ArcSDE 9.2 for Oracle version 10G R2 on Windows 2003 x64

We submitted this question on an ESRI user forum, but we would also like to submit it elsewhere to ensure an answer.
We are trying to install ArcSDE 9.2 for Oracle. The version of Oracle is 10G R2 (10.2.0.1). The server is a Windows 2003 R2 Enterprise x64 edition with SP1. There are now 2 instances of Oracle on the server, but this problem originally occurred when there was only one instance. The issue: ArcSDE 9.2 apparently installs just fine. There are no error messages during the run of the installation process. However, when the Post-Installation process is called, a critical error alert pops up reporting, "The application failed to start because OCI.dll was not found. Reinstalling the application might fix this problem." ArcSDE has been uninstalled and reinstalled several times. Oracle has been uninstalled and reinstalled several times. Various searches have been made, concerning this error message. On Friday the only ESRI Article we could find mentioning this error was Article ID: 25388 which stated that the "ORA81/bin" directory needed to be added to the PATH environment variable. However, today we found a new ESRI forum entry dated 6/2/2007 with the querystring "c=2&f=1717&t=223961" in which someone reported the need to install the 32 bit Oracle_HOME. However the ESRI Support Center article he referenced, (dated November 14, 2006), stated that the 32 bit Oracle Client needed to be installed to a different Oracle_HOME and the service name created for it, is to be used in the Post-Installation process. And finally our Oracle DBA reported seeing another Support Center Article which stated that the 32 bit versions of the Oracle libraries are installed by default in a different location, and it was only necessary to add that location to the PATH environment variable. I have also seen information on Oracle forums stating that this message means that the Oracle client needed to be installed, but our Oracle DBA reports that this is installed by default with Oracle DB server. My question is of course which if any of these solutions is correct?
E.R. Joell MCSD MCDBA

I have managed an ORacle/ArcSDE environment for many years where multiple SIDs were running.
If it doesn't know which SID then it would indicate that it is picking up the wrong ORACLE_SID environment setting. To be honest, UNIX is an easier environment to operate software in as one can set environment variables to suit software very directly. Now I have not run ArcSDE on a Windows environment before so any suggestions I have may not work as I write them.
Still, I would suggest you consider writing a CMD/batch script that:
1. Set all appropriate Oracle environment variables DIRECTLY eg
SET ORACLE_BASE=c:\oracle\product
SET ORACLE_HOME=c:\oracle\product\10.2.01
SET ORACLE_SID=...
2. Set the ArcSDE environment
3. Sets the Path to include all Oracle, ArcSDE and required Windows executables
4. Start the ArcSDE service:
NET START ESRARCSDE (or whatever this thing is called)
I suspect if you can get this going you will never go back to any other method of starting and managing ArcSDE (this approach works and works well on UNIX so you will be all skilled up to migrate across to Linux/Solaris etc if you see fit).
Hope this helps.
PS I have run ArcSDE against non-supported versions quite successfully over the years so I would say try it against 10.2.0.1 and see what happens.
regards
Smon

If install CSM in VMware which windows2003 version(32/64bit) supported?

Similar Messages

Maybe you are looking for