If ipod has been dropped in water, will it ever work again?

If ipod has been dropped in water will it ever work again?

Maybe. Do not use or charge until it is dry. Dry using the instructions here:
How to fix a wet iPod or iPhone | eHow.com

Similar Messages

My ipod has been dropped and dented on the side and screen cracked. after i replace the screen will it still work?

any ideas?

Dropping an iPod + a dent on one side is no big deal at all
It can be a bid deal if the size(dimensions) of the iPod has changed. Although chances of that happening are very less or even 1 in a million; so you can very well go ahead and replace the screen.
I am taking into consideration that the touch function still works - even with the shattered screen!
Good Luck.
Please rate helpful posts. Thanks!

HT3302 How do I save an iPhone that has been dropped in water?

iPhone took a dip in the pool last night, removed the SIM card and put in a bag of rice overnight. Not powering up this AM. Thoughts?

You should have waited at least 3 - 4 days. In any case, especially if the pool was chlorinated, there was virtually no change of salvaging the phone anyway.
Bring your phone and $199 to Apple for out of warranty replacement.

[SOLVED]Will WOL ever work again after suspend to RAM on my server?

I used Ubuntu on this server for a long while and had WOL working after 'suspend to RAM' and after a 'shutdown -h'. Suddenly with 10.10 WOL after 'suspend to RAM' stopped working, WOL after 'shutdown -h' was still working fine, so I used that for the time being. Some days ago I thought, "well, you use Arch on your laptop for years now, so why not try it on your server, you don't like fixed release cycles anyway and Samba on Ubuntu never worked reliably on this machine, too'. So after a little fiddling to install Arch on this server and following the pm-utils entry on the Arch Wiki I am now at exactly the same position as before, WOL after 'suspend to RAM' doesn't work while WOL after a 'shutdown -h' works. The funny thing is that if I stop the network service before calling 'pm-suspend' on the server directly I can wake it with a WOL command from my laptop. I checked (via ethtool) and saw that disabling the network actually leaves the wol flag for the network card on g, but starting the network service again sets it to d. I have read many howtos and forum posts, but am at a loss right now.
Does anyone have hints or an idea to where to look now?
EDIT: Oh man, could this have really been so easy?
It turns out that I simply need to stop the network service at suspend and start it again at resume, I don't even need to unload the driver module of my network card, doh. What put me off track were all my previous attempts under Ubuntu where I had tried the same thing following provided means (trough acpi) of the distro, seems I messed up there or the documentation was out of date. I now just created a hook completely myself following the Arch documentation for pm-utils and it works now!
[root@archi ~]# cat /etc/pm/sleep.d/Start_and_stop_network_service
#!/bin/bash
case $1 in
hibernate)
echo "You didn't really call hibernate?"
suspend)
echo "Stop the network service"
/etc/rc.d/network stop;
thaw)
echo "oh, suspend to disk is over, we are resuming..."
resume)
echo "Start the network service again"
/etc/rc.d/network start;
/usr/sbin/ethtool -s eth0 wol g;
*) echo "somebody is calling me totally wrong."
esac
I also have to re-enable wol in the script, and at a cold boot I do the same through '/etc/rc.local'.
Last edited by signor_rossi (2011-05-10 19:44:07)

I agree iMessage is the worst thing Apple have done! Took me 3 days to work out why my text messages were not being sent, more oddly, text message were apearing on my Ipad whcih is is not the 3g model! just switch it off insettings. Other than the iOS 7 is pretty good!

Will IMessage ever work again?

I thought it was a problem with texting. But it's iMessage. Apple told me to do a restore (after I was forced to do this when downloading ios7). Problem is not fixed. I'm not getting about 50% of texts. I've done everything could to fix this.
Will this get better with a new update or fix on its own? Or is it actually my phone? I believe it is still under warranty. He showed me I had severa important l system apps crashing in his diagnostic tool.
I'm frustrated as ****. My phone resets itself randomly.
iOS 7 update was the worst thing I've ever done to my poor phone.
What the **** should I do?
(Besides get an android, not eligible for upgrade yet!)

I agree iMessage is the worst thing Apple have done! Took me 3 days to work out why my text messages were not being sent, more oddly, text message were apearing on my Ipad whcih is is not the 3g model! just switch it off insettings. Other than the iOS 7 is pretty good!

Ipod screen is blank and ipod has been fully charged??

My sons iPod has been fully charged but will not turn on and/or screen is blank like it is off.

Have you tried a hard reset to see if that can help your iPod boot up? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. This may take a couple of tries.
B-rock

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

You should copy everything from your old comptuer to your new one.

I have had bad luck lately I lost my computer to water cant be fixed and now my IPOD has been stolen when I get a new one how can I get my I tunes,games on the new one without my computer or old I pod

I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account

What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.

How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

David ..
Your topic refers to an iPod touch
Then you say: How does one get an iPod nano to turn on ......
If it's an iPod touch, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, whether it's an iPod nano or touch, it probably needs service > Apple - Support - Service Answer Center

My Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

Hi hema87,
Thanks for using Apple Support Communities. This article has some troubleshooting steps you can try if FaceTime is timing out:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Ari

I have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

Sounds like you broke it.

ITunes will not minimize to a toolbar after iPod has been connected!

I love the feature in iTunes that lets me minimize iTunes to the toolbar (right click on the clock, toolbars-iTunes), however recently, possibly after the last iTunes update, iTunes does not even respond to the minimize button after the iPod has been connected, no matter which window that I am in.
What can I do?
Thanks!

To fix the channel locking problem press menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. Please let us know if further assistance is required.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

I lost my iPod and I've been using the app find my iPhone. But when I would use it it would tell me, my iPod has been offline like (no wifi). Is there a way for you guys to turn it online?

I lost my iPod it's almost been a week now , but I've been using find my iPhone to track it. Recently it showed that my IPod has been offline (wifi) now so I've been wondering if there's a way for Apple to turn it back online (wifi)

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Hi all, My macbook has been dropped and completley smashed...

Hi all,
My macbook has been dropped and completley smashed...i.e bent battery, smashed screen,etc I have already ordered a new macbook air, the question is i need to get my data of the old one as my last back up was exactly 6 months ago, is that possible ???
Many thanks

If your MacBook was off when dropped, the Hard Drive can sometimes survive a crash that will break the screen.
To access it, you will need to remove the drive and place it in a 2.5" format drive enclosure. If you dropped today's MacBook, it would require a SATA connector inside. Some really old ones may be ATA drives.
USB interface on the outside will be really slow, but is really cheap. If you think you might want to use the enclosure later for anything except backup-only, upgrade to a FireWire enclosure. OWC has a few different ones:
http://eshop.macsales.com/shop/usb/add-ons-and-hubs/enclosure-kits

If ipod has been dropped in water, will it ever work again?

Similar Messages

Maybe you are looking for