If it is possible to do LIV without block ?

Dear Experts :
If the PO value is 1000000 USD , and LIV tolerance limit is 10% .
If there is any way to do LIV which over the tolerance limit without block ?
I have see the question before but I don't know how to do it .
Hope someone can help me .
Thanks.
Best Regards,
Gary

Hi,
To acieve this please set the message M8 298 (Value exceeds limit & & in PO) as information in OMRM T-code. In OBMSG make this message as information and save. Thanking you.

Similar Messages

Is it possible to Migrate Live VMs from a Windows 2012 Hyper-V Cluster to a different 2012 R2 Cluster?

At the moment I'm in a bit of dilemma because I know that Windows 2012 supports "Shared Nothing Live Migration" but recently I got to know that this feature is available for stand alone Hyper-V Servers. My Setup is that I have
3 Servers running Windows Server 2012 Hyper-v Failover Cluster and I need to migrate everything to a new cluster running on Windows Server 2012 R2 and offcourse some VMs can't be turned off during migration so I need to do this live during production hours.
Another note is that both clusters will be running on the different LUNs since each cluster has its own CSVs. I need to know if it is possible to migrate such VMs/Roles Live without have any downtime of the VMs/Roles?

Yes, but one exception - live migration works only on "compatible cpu's". There actually is a setting in CPU for forcing compatibility
mode. If that is not set, and you mvoe for example from AMD to Intel, then - this is not possible in live migration, cluster or not.

Ok so my ipod touch is not working i try everthing there was i need my ipod touch i can't live without it plz help ok i update ios 6 and it wouldn't load so i shut it down and turn it on the screen was blue and i turn it off again and turn on and screen

i typed it wrong sorry can't someone help me i will tell u guys what u wanna no plz i really can't live without my ipod touch i miss it so much so plz message me

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?

Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?
I want to use my iPad as a screen for a reversing camera in my van and want to know if this is possible. do i need a bluetooth camera and is there a specific one that will connect to the iPad? Or is there any form of adaptor that I can plug the camera straight into the iPad?
Any ideas?

no
only "live" thing one can do is to airplay mirror the screen of a ios device or a newer mac with mtn lion

When using Find My iPhone, is it possible to hear live sound around the device?

When using Find My iPhone app on the iPad2, is it possible to hear live sound around a device wham the "Play Sound" button is tapped?

Yes.
What do you hear?

LIV without GR

Hello Experts,
I would like to ask how can I post LIV without having post GR in PO. I have alread unchecked the GR Based Invoice Verification in both the Vendor Master and the Purchase Order. But when I post LIV using MIRO, it prompts the error "Total LIV qty is greater than GR qty". Can anyone help me, thanks.

Hello,
Inoredr to post the invoice without GR posting, following steps to be followed :
1) Ensure that GR based IV indicator is unchecked in PO.
2) Ensure that Invoice verification indicator is checked in PO.
3) In Miro you need to select reference as PO and enter po number.. All the data will get fetched auitomatically.
If you follow these steps, you will not get any error. Please let me me know if it is worked.
Regards,
Subhash Bhagat

Is it possible to create l3vpn without enabling mpls in the core and PE routers .

Hi
i have below setup , in this PE1,P,PE2 routers do not have mpls support , it have only MGRE and GRE tunnel support ,
is it possible to create l3vpn without mpls here .
bgp session between PE1 and PE2,
CE1---------------PE1-----------------P---------------PE2------------CE2 .
PE1,P,PE2 do not have mpls support .
Thanks
Duraipandi

hi durai,
you can use the vrf-lite model but this is complex to manage in larger networks.
for example:
CE1 ---PE----core(x)---P------PE---CE1
CE2 --/ \----CE2
in this case, without mpls, I need to create on the core(x) link 2 vrf's with 2 vlans to go to "P".
and the same on the other PE and link.
Now if you think that there are more P's with backup paths or more CE's that linkage exponentially increases to define those vlans and in all your P routers is that awareness of every CE route!
MPLS just simplifies this; single core link,by just using labels. Your P routers only see PE next hops and are opaque to the number of vrf's you carry/service. Adding another P or PE device integrates into the routing naturally and MP BGP takes care of the PE advertisement. So expanding and rerouting are more natural and graceful here too.
So while technically MPLS can be omitted, it is just not a smart thing to do from a design perspective in l3vpn.
cheers!
xander

Can we migrate SharePoint Designer 2013 workflows from DEV to UAT to Live without any issues? Any bad experiences?

Hi there,
1. Can we migrate SharePoint Designer 2013 workflows from DEV to UAT to Live without any issues? Any bad experiences?
2. When we deploy these workflows - does IIS need a restart?
Thank you.

That depends, did you create reusable workflows? Those can be deployed to another environment (of course depending on dependencies within the workflow itself)
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Ipod gone mad and i cant live without him!!!!

HI! my ipod gone crazy. first on the screen told me to download a new version and i did it and now it is telling me to restore and i did it but it unsuccessful. it is telling me the following: Itunes has deteched an ipod that appears to be corrupted. you may need to restore this ipod before it can be used with itunes. you may also try disconnecting and reconnecting the ipod.
I did both restore and conecting the ipod but nothing happening! please i cant live without my ipod. got to be solved!!! thanks

First try to do a Restore with another computer, if still does not help, go and find a Mac computer, do a Restore there ...

Plug-ins you can't live without

What are your favorite third party plug-in? I'm looking for drum machine, synth, and sampler recommendations for use on an Intel Mac with Logic. With my old powerbook and Logic 4.8.2 I was using mostly hardware. Now with the new Macbook Pro I'd like to get into using more plug-ins, but i don't have much experience with them and their integration into Logic. I was considering the Native Instruments stuff, Battery, Absynth etc... if anyone can comment on the quality and integration. Also, any more obscure gems out there you can recommend would be great. I'd really like something that can do what a Elektron Machinedrum can do in software. Or maybe a good 909 or 303 emulator?

What are your favorite third party plug-in? I'm looking for drum machine,
synth, and sampler recommendations for use on an Intel Mac with Logic.
what kind of music do you make? helps to know, different things are good for different styles of music.
anyway, a couple of things I'd rather not live without, in no particular order are:
ohmboys delay.
I find the delays in logic to be really creatively lacking and just plain average. the tape delay sounds authentic and all, but it kind of just does the one thing, and frankly I can pick it whenever I hear it in anything nowadays. ohmboys delay gives you a lot more colour and a lot more ways to create a bit of mayhem. and then it also has that awesome loop button, which is fantastic for controlling the madness and using it in musical ways. it's my go-to delay for when I'm working on remixes.
UAD card.
on my G5 system I have a UAD card with all the plug ins enabled. I'd have to say that it's a keeper as well. I miss those plug ins on my MBP setup, but I don't think I miss them enough that I'll buy one of those portable units that UA are releasing. frankly I think I'll replace the concept of the UAD on my portable machine with URS plug ins, or maybe a liquid mix later on.. much more bang for the buck, and really for me the only plug ins that I use all the time on the UAD are the dynamics and EQ ones, 1176, LA2A, pultec, neve.. and also the plate reverb.. but maybe I'll make space designer impulses of that and see how that goes.
melodyne plug in.
not much to say about this, it's just so good at what it does and so dang useful. I think with few exceptions, most users should have it.
sonalksis EQs and comps.
hard to get super super excited about these, but they're just really good and really solid. you can tell that there's good quality design inside these things, right down to no latency operation and just good reliable results. I use them all the time on my MBP setup cos I don't have many good EQs and comps on that machine, and they are by far the best I have.
ivory piano.
I love the intimate sound I can get from this plug in. a lot of people rave about NI akoustic piano and how much better it is. I can't say, but I love ivory for the piano sounds I usually want to go for.
ohmforce symptohm melohman.
I just love looking at the interface of this thing.. it's like looking at a comic or a zine, with touches of manga. also, I think it's a pretty underrated synth. it makes some beautiful, bizarre harmonic resonant sounds, and also some solid punchy sounds too. not everyone is using it, so it brings something unique to things, when everybody else's idea of unique is absynth..
reaktor.
I doubt I'll ever fully and deeply get into reaktor. but when I need to go off on a trek to make soundscapes or I feel the need to try and bring some randomness to a track, I'll often spend some time going through my reaktor ensembles to see what happens.
URS neve channel EQs.
I think these are lovely. used them a lot on a film score once, to bring out the grain and sizzle in some sculpture sounds I made. they are also great for rolling off bottom end and driving the midrange in sounds, to bring out a great presence. very very good for shaping your sounds into main characters in a mix.

I have windows 7 64 bit, but i-tunes 10.5 will not install, an error keeps popping up. I could live without the update, but my i-phone is not recognized anymore

I have windows 7 64 bit, but i-tunes 10.5 will not install, an error keeps popping up. I could live without the update, but my i-phone is not recognized anymore

I've got the same problem and can't find a fix...

HT201303 I can't live without my music....help me get my iTunes back....... ;(

I have several apple ids and I can't figure out which one I "associated to this device" and had to reset it, so now I can't get my iTunes back for 90 days....***? Please help.....I can't live without my music.....thanks everyone....is there a way to by

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Is it possible to transport variables without the planning areas??

Someone knows if it's possible to transport variables without the planning areas, only the variables?
Regards
Guilherme

Hi,
Yes, if the p.area is available in target system.
Use this report: UPC_TRANSPORT_BPS_ALL
Regards,
Suan

IS O&G - is it possible to use MPL without activating the ECC- DIMP?

Hi
We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
The question is it possible to use MPL without activating the ECC- DIMP
Request you to please help us to understand.
Regards

Hi Venkat,
If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
Could you please let know why you want to report on the unactive request, is it having some problem with activation?
Regards,
Pankaj

Is it possible to use SCOM without an Opertaional database?

Is it possible to use SCOM without an Opertaional database? (and without the data warehouse).

Hi,
No, it is not possible, you must at least have the Operational Database. But please check Microsoft Monitoring Agent, is that what you are looking for?
Monitoring with Microsoft Monitoring Agent
http://technet.microsoft.com/en-us/library/dn465153.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

If it is possible to do LIV without block ?

Similar Messages

Maybe you are looking for