If iTunes 9 will not launch - read this

Hi there,
If iTunes 9.0.2 update has completely messed up your itunes - will not launch or what not, make sure you have the specs that are required to run it.
Trust me, today, I finally sorted through my problems with the update.
First off I was running OS X 10.5.8, safari 4.0.4.
You need at least a 4.0.3 to run iTunes store in 9.0.2 and to run a safari 4.0.3 you need (i think) at least an OS X 10.5.7. And there's a need to have at least a Quicktime 7.6 installed (the quicktime was my major problem).
So if you have at least these three things iTunes 9.0.2 should run:
Mac OS X 10.5.7
Safari 4.0.3
Quicktime 7.6
If you're still having problems... I don't know what to tell you except call customer service or continue posting and hope.
Best of luck!!

This is the exact same problem i am experiencing, wired pc, into router that also provides the wireless connection for my iphone. I get no device popping up in itunes when trying to add a library in remote.
I have added the port forwards to my router with no joy, disabled any and all software firewall/av, no joy.
Its quite frustrating as i can get to my laptop's library just fine (laptop is wireless), i've even tried at work and can get over wireless via an access point onto the network and my pc there is wired in.
I can only guess it is my router doing something stupid, or because it is running as a gateway and router, or something.
Any other info would be great

Similar Messages

  • After new update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

    After the newest update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • TS1386 itunes will not launch in XP because: "itunes library.lit cannot be read because it was created by a newer version of itunes"

    itunes will not launch in XP because: "itunes library.itl.cannot be read because it was created by a newer version of itunes"
    Is this an apple problem or a computer problem? If I reinstall itunes will my library still be there?

    Uninstall and reinstall the Apple software.  See the following.  That link also has a link for Win7 and Vista.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Als Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly befor

    After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Also Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly before installing Maverick.  Also everything that loads, all programs, take twice as long to load.  I have MacKeeper and have cleaned and discarded all the garbage. 

    Remove "MacKeeper" as follows. First, back up all data.
    "MacKeeper" is a scam with only one useful feature: it deletes itself.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
    If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
    ☞ Quit MacKeeper before dragging it to the Trash.
    ☞ Don't empty the Trash. Let MacKeeper delete itself.
    ☞ Don't try to drag the MacKeeper Dock icon to the Trash.

  • Itunes will not launch on Windows Vista no error code

    Itunes will not launch on my computer. I have windows vista. I have uninstalled and downloaded itunes repeatedly. I have also tried all of the troubleshooting tips available on the apple support site. But none of them worked. Quicktimes works fine. It is just itunes. I even opened up task manager to check the processes and itunes appears for about a second in the processes tab then just disappears. I have no idea what to do i have an iphone 3gs and havent updated it for a few months now and cannot sync my iphone without itunes. I Have kaspersky internet protection but i doubt thats the problem because itunes was working fine until i updated it.PLEASE HELPPPPPP!

    Presumably the configuration fails to complete, so every time you start iTunes it has another go.
    As iTunes works normally when you plug in your iPod, you should be able to work round this by creating a new iTunes short cut.
    Go to Program Files\iTunes and right click on iTunes.exe. Select: Send to>>Desktop(create shortcut). If you are lucky you will be able to open iTunes using this short cut.
    However this work around does not fix the underlying problem that WIndows fails to complete configuring iTunes.

  • Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)

    Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
    Yeah

    OK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
    P.S.
    This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
    afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.

  • ITunes will not Launch 10.6 Snow Leopard

    I just upgraded to 10.6 last night and now my iTunes will not launch. I removed all my extra plugins and am trying to start fresh. Here's the error message that pops up in the Console:
    8/29/09 10:26:15 AM [0x0-0xbddbdd].com.apple.iTunes[9902] [Deprecated] CocoaJava: com.apple.cocoa.foundation.NSRuntime
    8/29/09 10:26:15 AM [0x0-0xbddbdd].com.apple.iTunes[9902] -[NSJavaVirtualMachine initWithClassPath:] FATAL: cannot initialize ObjCJava. Exit
    8/29/09 10:26:15 AM com.apple.launchd.peruser.501[237] ([0x0-0xbddbdd].com.apple.iTunes[9902]) Exited with exit code: 255
    Any ideas?

    OK, this solution worked for me:
    Quit all programs, force-quit iTunes if it is locked up.
    Disconnect any iPhone or iPods
    Go to: Macintosh HD/users/"your user name"/library/preferences, and drag to trash the preference panels: with itunes in the name: including>com.apple.iTunes.plist, com.apple.iTunes.eq.plist
    Download iTunes 8.2.1 from theApple website,
    Run the iTunes 8.2.1 installer
    It will have you set up iTunes as if for the first time.
    Launch iTunes after it is set up, it will take a bit as it creates new prefence files.
    Quit iTunes>restart the mac>Launch iTunes and after it loads plug in your iPod or iPhone.

  • TS1538 I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??

    I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??                   

    If you have the latest version of iTunes you should not have to download the ipsw file separately as jalp suggests. iTunes will download it automatically.
    This error (9) most often means that your antivirus or firewall (or router) is blocking access to Apple's servers. In rare instances it can also mean that the phone was hacked (or "jailbroken") to unlock it. If this is the case you must do a DFU restore, not Recovery Mode, as follows:
    Reboot your computer
    Disable your antivirus and firewall. If you has Kaspersky you may actually have to uninstall it, as it can never be turned completely off.
    Connect the USB cable to a USB port directly on your computer, not to a hub. DO NOT connect the other end to the phone
    Disconnect all USB devices except for mouse, keyboard and iPhone cable.
    Launch iTunes
    On the phone hold the HOME and SLEEP buttons at the same time for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button. The screen should be black. If it has an Apple logo this means you held both buttons too long. Release the HOME button and do it again.
    While holding the HOME button connect the free end of the cable to the phone.
    After a short while iTunes should recognize a phone in "recovery mode" (iTunes doesn't know the difference between DFU and Recovery modes, but the phone does)
    Release the HOME button and don't touch the phone or the computer until the process completes or you get an error message. Ignore any displays on the phone.
    If the error recurs the phone was probably messed up when it was hacked. This is not a hardware problem, or if it is, it isn't one you can fix.
    You can try repeating these steps with a different computer and a different cable. If that fails also the phone is probably not repairable.

  • TS1717 Since the upgrade to version 11 ITunes will not launch I'm running Windows 7

    Since upgrading to version 11 ITunes will not launch I have removed and reloaded again but it still will not launch.

    I was having the same problem.  I went into Control Panel and repaired quicktime, and now i am able to open itunes.  hope this works for you!

  • SW upgrade wiped out my iTunes library and also now iTunes will not launch

    I just completed the recommended Sw upgrade for iTunes and now iTunes will not launch and my iTunes library is TOTALLY EMPTY.
    Clearly, I am NOT A HAPPY CAMPER. I have lost a substantial investment of $$ and time in losing my iTunes library - so Apple should be paying me for my loss.
    I need help, can you, will you help me?  I want my iTunes library back and I'd like to reinstall the previous version of iTunes, because it worked fine.
    Barbara Bowen
    Apple, 1983-1993

    You don't say which versions so we don't know to which version you wish to revert.  Reverting won't get back your library anyway, if it is truly gone.
    Have you checked if your library is truly gone?  Have you looked in the iTunes folder and the media folder inside of it?  The library has two main components, all the media files for the individual tracks and the iTunes Library.itl file which give them the structure you see in iTunes.  Sometimes iTunes just loses track of the library file which can be re-linked, and what's really important anyway are the media files.
    If the library is truly gone you can restore it from the backups you make of your computer.  Backups are a responsibility of any computer owner ever since computers were invented.  If you don't have backups then it may be possible to redownload items purchased from the iTunes Store.
    I know I have glossed over some of this but it's not worth going into details on how to do all the different things until we know precisely what it is that needs doing.

  • Itunes will not  launch after re-downloading itunes with quicktime

    can someone please help me, i am new to this forum, but i have been sitting here all of this afternoon, trying to figure out just why my itunes will not launch ! i have read some of the advice from here already, i have gone to the apple website & downloaded the itunes w/quicktime, but, i still get that message:
    itunes has encountered a problem & needs to close down. please tell microsoft about this..........so, please tell me that there's hope for me & my problem ???? it's been working fine until now....i added christmas music to my ipod just about 2 weeks ago...and now , itunes won't even launch !
    dell dimension dim2400   Windows XP   celeron(R) cpu , 240 ghz, 1.00gb ram
    dell dimension dim2400   Windows XP   celeron(R) cpu , 240 ghz, 1.00gb ram

    please disregard

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • HT2589 itunes will not launch on my pc

    My itunes will not launch from my pc. Have repaired it, uninstalled and reinstalled and it still will not open. Have a mini player icon on the task bar that is unresponsive also. Help please.

    Hello, fledens. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive or failing to launch.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

Maybe you are looking for

  • Email Invoices to customer as a PDF attachment

    Hi, I have a requirement as follows:- SAP will get multiple invoice numbers from an external system. I need to send all the invoices(for a given customer) in one pdf and email it to the customer  as an attachment. Please provide your expert and detai

  • Contracted software downloads

    I have been trying to download Solaris 10 6/06 from the contracted downloads site for days now. No luck. Even using the Sun download manager I cannot manage a connection. I thought it might be worth proving that my network connection wasn't the issue

  • Import finished with few errors...Help understanding it!

    Hi all, Yesterday, I finished to do an import in oracle. I used the impdp command and got few errors after the import was done. Here are some bits from my log. It was very long but I shortened it with the most common errors. I would appreciate your h

  • Music for specific photos in slideshow

    How can I set specific music to play during certain times of the slideshow. I am having such a hard time figuring this out and HAVE to have my movie/slideshow finished by tomorrow AM. Please help!!!

  • Not able to install VS 2013

    Hi, I have Windows 7 SP1, with all the latest update, currently having issues installing VS 2013 with the following error, and have basically tried everything, can you please help? [0D78:2338][2015-04-27T09:44:37]i000: MUX:  ExecuteError: Package (vs