If MD02 don´t plan the components, please check this thread.

There is a new error in Md02 with IS-ADEC solution.
The BOM is not exploded and the components are not planned.
THis is a serious error with many consequences in planning and execution enviroment.
The note 1562786 will sove this issue.Please be informed about this note.
This is the validity of the note:
ECC Discrete Industries Mill Products
                                          600
SAPK-60020INECCDIMP
                                          602
SAPK-60210INECCDIMP
                                          603
SAPK-60309INECCDIMP
                                          604
SAPK-60410INECCDIMP
                                          605
SAPK-60504INECCDIMP
Thanks
Maria Nunez Senior PP consultant of SAP

Hi Maria Nunez,
Firstly i would thanks for finding out new error in MD02. Some extent i got the issue but still need some more clarification on this.
Mainly I am not familiar with IS-ADEC could you please help me out to get more information obut it.
Thanks & Regards,
Madhu.G

Similar Messages

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When connecting to itools an error appears that please check the asccernity please check the itunes seetings

when connecting to itools an error appears that please check the asccernity please check the itunes seetings plz tell me to coonect it

when connecting to itools an error appears that please check the asccernity please check the itunes seetings plz tell me to coonect it
iPhone 4S, iOS 7.0.6

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

When i try to use hulu acc.i keep getting the same message / sorry we are unable to load the player please check your internet connection clear your browser cache and try again. i thought i did it right .

Question
when i try to use hulu acc.i keep getting the same message / sorry we are unable to load the player please check your internet connection clear your browser cache and

I found a solution! (at least, for my platform; Windows XP Home SP3, Firefox 4.0.1) =) Go to http://labs.adobe.com and download the Release Candidate 1 version of Adobe Flash 10.3.181.5. I swear, the Second I installed this, it worked INSTANTLY xD. Best of luck to you! (and anyone else who sees this =)
-Erik P.

Please check this problem

please check this problem i am not getting my j2ee server deployed for a long time.
when i try to execute my j2ee server ,i get the following problem
C:\Documents and Settings\win>j2ee -verbose
J2EE server listen port: 1050
Naming service started:1050
Exception in thread "main" java.lang.NoSuchMethodError
at com.sun.corba.ee.internal.corba.AnyImpl.createTypeCodeForClass(AnyImp
l.java:1256)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.createTypeCode(Sh
utdownUtilDelegate.java:223)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.writeAny(Shutdown
UtilDelegate.java:178)
at javax.rmi.CORBA.Util.writeAny(Util.java:80)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.re
bind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:188
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:202
at javax.naming.InitialContext.rebind(InitialContext.java:370)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:192)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:149)
at com.sun.enterprise.server.J2EEServer.bindObject(J2EEServer.java:718)
at com.sun.enterprise.server.J2EEServer.createServerObject(J2EEServer.ja
va:473)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
may be path variables are not set properly plaese tell what is the problem.thank you.

sounds to me like you have a stale corba stub or something, but i'm no corba expert and i thought it went extinct about 5 years ago

Query quote help-Please ignore this thread

Dear all,
Please ignore this thread.
Thanks for understanding
Kai
Edited by: KaiS on Nov 12, 2009 9:33 AM

try
and A.subno =''' || subno || ''' ;' from usr_inf where rownum <300;
those are two single quotes ('), not double quotes.

I don't see the components ADF faces in my JSPX page...

Hi,
I don't see my components ADF in my JSPX page when I drag and drop them. I have to run my page to see its contents...
Can somebody help me please. Is it exists an option in Jdeveloper to mask jspx pages contents?
I use Jdeveloper 10.1.3.4
Thks,
M.

Hi Shay,
Thank you very much for the blog's link, I found the solution in metalink, Doc ID: 382812.1 .
There are many causes that make JSF tags not being displayed properly.
For me, it was du to the web.xml file :
ADF Faces pages do not display correctly when using the FacesPageCachingFilter (ADF Faces Cache).
You can put the following lines in your web.xml file in comment during Design Time:
++
I comment the filter-mapping too :
++
Now, all works fine.
Thks again.

I payed in game " clash of clans " but I don't get the gems please help me '14000 gems'

HI
i payed gems many times from clash of clans but today I payed '14000' gems and the said 'successful' but i don't get the gems.
what I can do?

Hello abdullatif119,
If you do not see a consumable in-app purchase you made, then please contact the developer of the app you made the purchase in.
If you don’t see your in-app purchases - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Just got an ipad air and while creating my apple ID with credit card, I got to itunes gift card/ itunes gift section and was asked to supply a CODE to proceed with the form but I don't have the code. please how how can i get the code?

Just got an ipad air and why creating my apple ID with credit card, a CODE was requested in the itunes gift card/ itunes gift in order to preceed with the form but I don't have the code. Please how can I find the code so as to enable me complete the form successfully. Thanks alot

The iTunes gift card field is optional, you don't have to fill it in - leave it blank if you don't have a gift card.
iTunes gift cards are country-specific (they can only be used in their country of issue), and they are not available in all countries - so you might not be able to dill it anyway.

Subcontracting - How to plan the components in MRP

Hi Experts,
We have the following requirement to map the subcontracting scenario in SAP MM.
1) Subcontracting PR has to be generated during MRP run for all the FERT materials ( Done )
2) Auto convertion of PR into PO by scheduling the batch job ( Done )
3) Goods issue with subcon delivery ( done )
4) Pick list from subcon delivery ( possible)
My question here is How to create the delivery schedule lines for components thru MRP and made available to the subcontractor in the required date.Client does not want to maintain the inventory for even 1 week.
Example :
FG required date 7.01.2009
PO release date 30.12.2008
Component level A Requirement date 29.12.2008 ( How we can control in MRP)
Component Level B Requirment date 03.01.2009 ( How we can control in MRP)
Appreciate your reply.
Thanks / Karthik

Hi
Thanks for your reply.
Let me brief about the process.
Client wants to consign the components at subcontractor's place and will be considered as a separate plant.So the subcontractor will manage the component stock which is supplied by third party vendor directly to the subcontractors place. so there will not be any frieght cost issue.
But the client requirement is not to spend more money on component inventory so when the level 1 components are required the system should generate the delivery scedule with required dates.
1) Component A is reqd to manufacture the HALB assemply at level 1
2) Component B & HALB to manufacture the Finished Goods at level 2
My requirement during MRP run
1) PR for FG
2) Delivery Scedule for Component A with reqd date
3) Delivery scedule for component B with reqd date
Can I make HALB as phantom BOM???
or Suggest me how I can do other way round..
Thanks / karthik

HT201240 I don't have the disk to do this, where can I get one? I bought my mac from a shop in botany, this was an ex lease mac etc.... Can you please help?

Hi, I don't have the start up disk for my mac, and am not able to login how can I reset my password? Mac was purchased as a ex lease from a PCM shop in botany.... Cheers

Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

"there was an error contacting the server. please check your network connection and try again."

On my Ipad Revel is giving me the following error:
"there was an error contacting the server. please check your network connection and try again."
The Ipad is connectd to the internet and it's the only app not working. This has been going on for 6+ months.

I'm having the same problem on an iPhone and an iPad, while another iPhone and iPad are working perfectly, all on the same account. The Mac app is also working fine. I've reinstalled the apps on the iDevices and checked to make sure the region is set (it is) and all apps are up to date. What seems to happen is the app syncs perfectly, the blue progress bar shows the sync is complete, but the app continues to try to snyc, periodically flashing the connection error. If I quit or force quit the app or even force a restart of iOS 7.04, then open Revel, it immediately begins to sync, updates with no problem, but the sync icon continues to spin until I quit. Each time I activate the iDevice, I'm greeted by a message from Revel that the sync was interrupted. I open the app and it's back to the endless syncing and error messages.
Update: The problem continues. Message was edited by: lumierefl

TS3297 hi i was perfectly ordering from i tune all of a sudden i cant do that any more message coming up can not open the page please sort this out for me

hi i had a perfect account with itune all of a sudden stoped and constantly a message coming up can not open the page and since then i tred to change my password still cant buy any song please sort this out
thank you
rico jafarian

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

If MD02 don´t plan the components, please check this thread.

Similar Messages

Maybe you are looking for