If my charging cable doesn't work do i get a new for free
if my charging cable doesn't work do i get a new for free
I had a lightning cable, that came with my iPhone 5s, that frayed and broke at the connector. I took the cable and phone into the Apple Store and they exchanged the cable for a new one with not a question asked. Good experience.
I think part of it is that the design of the Apple cables is quite flimsy especially at the connector and I think they see a lot of them fail.
Similar Messages
-
Upgraded to iOS6 and now charging cable doesn't work
I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work. No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer. If I plug my iPad charger into it, it works fine. How can the new operating system determine what kind of usb charging cable it "wants" to accept? This charger and cable worked flawlessly before the OS upgrade.
Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!
-
My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?
As I said in my previous reply:
If defective, Apple will exchange the iPod at no cost unless they have been abused. That applies to Apple earphones too.
Apple Retail Store - Genius Bar -
i basically explained everything in the title, it is just the usb cable that doesnt work at all, the socket is fine.
mccollh wrote:
do you think they will think i caused this damage? and will they give me a replacement cable straight away as my phones completely dead and i need it for work :/
No one can predict what Apple will say when they see your cord. Just bring it in. If found defective it will be replaced on the spot. -
As mentioned above
First of all: Your iPhone "present" was most likely hacked/jailbroken. The update you did bricked it and it is now useless. Apple will not repair this.
Second: The warranty is usually only valid for the country it was purchased in. Check before you buy.
Third: You can set English as default language on the iPhone . iPhone supports a myriad of diffrent languages. If you buy it Poland it doesnt matter. -
Flash player doesn´t work on safari6, get an downgrade for this maybe?
does any one of you know how i can get down to safari 5.1.7, im running on 10.7.4 osx lion!
Here are a couple of ways to determine whether you have the latest version of Flash:
http://flashbuilder.eu/flash-player-version.html
http://www.adobe.com/software/flash/about/ -
my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?
It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.
-
Charger cable no longer works with iPhone 5s
Hello:
My white lightning iPhone charger cable used to work to charge my iPhone when I plugged one end into a powered USB and the other end into the iPhone.
Now, if I am lucky, I will get a message stating that this device is not supported by Apple and may not charge this iPhone.
Is there any setting, to turn off this bypass, so that my charger cable can be used to charge my phone?
Or what is missing from my charger cable which allowed it to charge fine in an earlier version of IOS that no longer work in 8.1.3?
Thanks in advanceClean the squashed fluff and debris out of the phone's charging port with a wooden tooothpick or similar. Be gentle.
-
IPad to tv using av cable doesn't work since update
II've used a av cable to connect iPad to tv via hdmi to watch you tube etc but since os update it says not compatible when I plug into the iPad and doesn't work
You need to get a new cable. Suggest you try out the cable in the store before buying. Do not know if any third party cables work. Goto apple store and buy new cable. Try in store. Older apple cables do not work either.
This problems has come up with 8.x.
Robert -
Why tethering with USB cable doesn't work after IOS6.0 update?
why tethering with USB cable doesn't work after IOS 6.0 update?
Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot
-
Calendar sync via cable doesn't work with now I've updated to Maverick and ios7
Calendar sync via cable doesn't work now I've updated to Maverick and ios7.
I am sorry you are having this trouble.
Here is an article on troubleshooting calendar syncing with iCloud. See if the suggestions there are of help.
http://support.apple.com/kb/TS3999 -
After charging my iphone5 for many hours I checked it and it 100% charged but not fully charged as the sign of charging on the top of the screen is still and the sign of unblug the charging cable doesn't show up and this happened several times ...!? What is the problem and how I fix it !? Thanks in advance :)
Apple told you it was unrepairable.... You had it serviced by an unauthorized party. It's now no longer eligible for out of warranty replacement by Apple.
There's really nothing else we can say about it. Find a competent 3rd party repair shop or buy a new one. -
my shuffle will not work!! it charges but once of charge it doesn't work, reset it but still no joy?? any ideas??
I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think. -
I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?
Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.
-
download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3
As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?
Maybe you are looking for
-
Unable to create EM repository in 10g RAC - 2 nodes (Windows)
Hi, I am trying to configure Enterprise Manager via command prompt since it failed while creating the database through DBCA. I have a two node cluster running oracle 10g (10.2.0.2) on Windows 2003 x64. I could get something in metalink related to emc
-
How do I copy an advanced function to another cell in excel?
Hi, I'm an excel portuguese language user and I need some help, but I really don't know the english names of the excel's features. I tried to ask for help at MS brazilian' forum, and then on the english one but by this time no one knew how to help,
-
Let's say I want to construct a GUI that has over 120 components composed of JTextFields, JLabels and JCheckBoxes. Each component will have an event listener, aside from the JLabels. This GUI will be displaying and inserting data into a database. Sho
-
Can I add text within a slideshow or between slideshows
I want to scroll text at the beginning and end of my project, Is there a way to do this? Also is there a way to add text in-between slideshows or into a slideshow?
-
Error DOM_10079 : Unable to start service on any node
hi i am getting below error after i have created dwh tables using 64 bit data base client . table screated successfully. but when i try to login to informatica and trying to start the repository services i am getting below error Error DOM_10079 : Una