If my folio file works properly on the desktop and on my device via the cloud...
It should work when it is published. Correct? I was just wondering if there is some kind of proofing of a folio before it goes live. Thanks!
If you are using Adobe Content Viewer to preview the folio by downloading it from within ACV, then yes, you are seeing exactly the same folio content that will go live when you publish it. There is no need to proof it any other way.
Neil
Similar Messages
-
I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?
It shouldn't be an issue. Ultimately, Presenter doesn't care what language the content or audio is in, it will deliver it just the same. The only issue I could see causing problems would be the player skin. It has Spanish lables, but they only show on a computer with the OS set to Spanish. If you want the student to view both and English and a Spanish version on the same computer, you may need to have two versions of the language.xml file where you have one that has the desired English lables in the "en" section and one where it has the desired Spanish labels in the "en" section. You would then swap these files in and out of the folder located at,C:\Users\{UserName}\AppData\Local\Adobe\Adobe Presenter\Themes , as you need to publish an English or Spanish presentation.
-
Skrolu mouse does not work properly in the list of bookmarks
skrolu mouse does not work properly in the list of bookmarks
yer imleri listesinde maus skrolu düzgün çalışmıyorA possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You can also try to move (delete) the Firefox plist file.<br />
See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist). -
Scrolling effects in Muse are not working properly with the Chrome browser at the moment.
My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com
We are using Vertical spry menu bar features provided with Dreamweaver CS3.
You are using Spry 1.4.
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4.
When using Dreamweaver CS3 (uses Spry 1.4), it's wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
If after that you still have problems, please come back here.
Ben -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???
Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
My IPOD classic headport is not working properly. The sound is going in and out?
My ipod classic headport is not working properly. The sound keeps going in and out. I have tried changing headphones and checking the settings. Does anyone have any ideas?
Do a Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner. -
My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Might be something from that link that will help. -
Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
Revision: 13157
Revision: 13157
Author: [email protected]
Date: 2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
Log Message:
-revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory. the automation projects swcs will still get compiled into the automation directory.
This should fix the build
QE notes: make sure packaging is correct
Doc notes: no
Bugs: no
Reviewer:no
Tests run: checkintests, doc targets run
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/projects/automation/build.xml
flex/sdk/trunk/frameworks/projects/automation_air/build.xml
flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
Added Paths:
flex/sdk/trunk/frameworks/libs/automation_agent.swc
flex/sdk/trunk/frameworks/libs/qtp.swc
flex/sdk/trunk/frameworks/libs/qtp_air.swc
Removed Paths:
flex/sdk/trunk/frameworks/libs/automation/Revision: 13157
Revision: 13157
Author: [email protected]
Date: 2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
Log Message:
-revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory. the automation projects swcs will still get compiled into the automation directory.
This should fix the build
QE notes: make sure packaging is correct
Doc notes: no
Bugs: no
Reviewer:no
Tests run: checkintests, doc targets run
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/projects/automation/build.xml
flex/sdk/trunk/frameworks/projects/automation_air/build.xml
flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
Added Paths:
flex/sdk/trunk/frameworks/libs/automation_agent.swc
flex/sdk/trunk/frameworks/libs/qtp.swc
flex/sdk/trunk/frameworks/libs/qtp_air.swc
Removed Paths:
flex/sdk/trunk/frameworks/libs/automation/ -
i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.
The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps -
Hi, My iPhone 4s does not work properly with the sound.
Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz
Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy -
The paint bucket tool is not working properly. The colors does not change, any suggestion?
Maybe on the wrong layer.
It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them. -
my IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Cheers, Tom
Maybe you are looking for
-
What is the keyboard command for opening the disc drive on a G5
fried old keyboard and am using an older one that doesn't have an "open" button. Thanks in advance
-
Permissions problem in Time Machine
I need to restore my iPhoto Library which I've somehow messed up today. I renamed the damaged library to Old_iPhoto Library then went into TM and selected the last backup from yesterday but the iPhoto Library will not restore. It starts to copy but t
-
My N8 had been working perfectly but while at work I turned my phone off and since turning it on I cannot get back into Ovi because it says I have no connection (connection error)! Anyone know a solution to this problem? I currently have ovi 3.1.1.85
-
10g compatability with BI Beans
Does anyone know if BI Beans will work with JDev 10g?
-
Syndicating Selected Qualified Lookup Entries
Hello all! Here is an issue we are working on. We would like to syndicate entries from a qualified lookup table for a particular customer, but only those where a certain qualifier has a specific value. For example: Qual Table: Non-Qual1; Non-Qual2; Q