If my Tiger installation fails, can I go back to 10.3.9?

With so many of you having Tiger installation issues, I figured that this was worth asking.
I have no problems with my current system, but need to upgrade to use certain software. If I run into major problems, can I undo the 10.4.6 install and go back to 10.3.9 or am I out of luck?
Imac G4 17" flat panel Mac OS X (10.3.9) 1.5 gig Ram

Hi averyb2;
If you clone your current system drive to another drive either internal or external Firewire, then if you wish to fallback to the old version it is a simple matter to clone the old system drive back again.
This is always the safest way to upgrade your operating system just in case something should go wrong with a clone of the all system drive it is extremely simple to get back.
One thing make sure to test the clone by booting from it before starting the upgrade.
Allan

Similar Messages

Tiger installation fails despite the advice found here--what next?

Greetings mac wizards--please advise me!
I've been trying to upgrade my i-mac from the Tiger disc that came with my i-book. (Sales rep told me this was legal and would work.)
Recurring message is "this software cannot be installed on this computer," despite having held the C key during restart, run disk utility repairs, removed plug ins, removed memory card.
Also tried installing "bundled software only" but got error message "bill of material for this package was not found."
Me thinks something is very wrong--perhaps this is not okay and rigged not to work?
Extended utility for my beloved i-mac is in your hands!
imac g4 flat screen Mac OS X (10.2.x) running on 10.2.8

Welcome To Discussions kever!
cornelius wrote "Unless I am missing something..."
Possibly, this is what he missed "I've been trying to upgrade my i-mac from the Tiger disc that came with my i-book.
Unless I'm missing something, William Kucharski is correct.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
If you don't want to wait for Leopard 10.5.x to be released, and your iMac meets the Tiger System Requirements, Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, AppleRescue, etc.
As posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Once Tiger 10.4.x is installed, you can use the PPC 10.4.9 Combo Update, to upgrade to the current version.
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue, also sells a Tiger installation set on CD.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Trying again: If the installation fails can i reinstall TIger on my Dual P

Please somebody!
if the installation of LEOPARD goes bad
cant i reinstall 10.4 and upgrade back to 10.4.10

Yes, but it would be much simpler if you cloned your existing system. Then, if the install fails, you don't have to start all over.
Use superduper and create a bootable clone on an external drive.

Tiger Installation Problems: Can't install from disc...continuous restarts

Attempting Tiger install on fairly old iMac (six years) ... the DVD player is caput, so I'm attempting to install with external DVD-ROM (Teac). Upon clicking the install icon, I get a message that asks me to restart to continue the process. Problem is once I restarted, nothing happened and I returned to the beginning. When I tried to restart (as instructed) while pressing the C key...nothing happened. When I tried to restart from the Tiger install disc, it wouldn't allow me to restart. I hit the key and get an error tone. None of the troubleshooting tips seem to apply to this situation. Is it the external drive? Is it my machine? Is it the install DVD 10.4.6? I'm out of ideas ...
Message was edited by: dlzier
Message was edited by: dlzier
Message was edited by: dlzier

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Exchange Server 2013 SP1 Standard: Installation failing can't progress

I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.

1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case.

Presenter 9 installation failed - can't uninstall v.8, does not appear in control panel

I am trying to install Presenter 9, but I am getting an error that says "A conflicting or prerelease version of Adobe Presenter 9.0 exists on this computer. The conflicting version must be removed before installing from the current media.". From what I have read on the forums, I am interpreting this to mean I should uninstall Presenter 8 first. According to the instructions, I should be able to remove it using the Programs and Features control panel, but Presenter does not appear there (if I open PPT it is still there, so I know v.8 is still installed). I have tried using the AdobeCreativeCloudCleanerTool but Presenter does not appear as an option for removal. Can you please tell me how I can uninstall Presenter 8 so I can install Presenter 9? I am using PPT 2010 32 bit and trying to install Presenter 9 32 bit. Thanks.

Yes, I Presenter 7 was installed before Presenter 8. I have Windows 7.
I found my old thread here: http://forums.adobe.com/message/5080369
I followed that. Here is what I have done:
I ran the reg file from http://blogs.adobe.com/captivate/2012/08/resolution-adobe-presenter-8-installer-issue.html
I deleted all the folders and files related to Presenter 7 or 8 in
C Drive> Users > Your User Name>App Data > Local > Adobe >
and App Data > Roaming > Adobe >
I reinstalled everything.
So far so good.

Tiger installation fails-Error Message 'there areerrors while installing'

Hi there!
I have just bought a new Tiger 10.4 full version (4 cds) and tried to install CD1 but everytime, i pass the disk verifying of CD 1 , then when it installs on the HD, i get an error message saying 'there were some errors while installing to your hardrive' .... everytime i have to reboot on older version Mac OS 10.2.8
Any help highly appreciated! Thanks
Apple G4 IMAC Mac OS X (10.2.x) 60 gb

Two things to try before trying to install Tiger. One, boot the machine with the Apple Hardware Test disk and run the extended tests. If any problems pop up, then you'll have to fix those first. Once you get a clean bill of health on the hardware, boot with the Tiger install disk, select your language, and, when the menu bar pops up, select Disk Utility->your HD, and repair the disk. If that works, then try the upgrade again.
BTW, are you upgrading a 10.2.8 backup or are trying to do a clean install?

First installation fail,can't communicate by cable after it happens

I install my solaris .the sun version is netra.
the first time i install my system by cdrom and using a cable
but during the install process the power off so i reboot my machine
and i also use cable to communicate with my sun.
but this time i can't communicate with the sun
the error message is
link comeup yet
timeout
avr/....
in the word , from that time i can't communicate with sun by cable no matter
how many times i reboot my machine , help

Seube wrote:
mmm it seems I spoke too quickly, things seems to work as expected now. I don't know what I did change since.
I've retested between two cards: it seems also ok except 2 strange things:
- when CAN2 is physically connected on PC2, it seems CAN1 that listens instead (as if CAN1 was connected)
- trames sent from CAN0 and CAN1 on PC1 seems to be repeated from IXXAT card: they are returning respectively on CAN1 and CAN0.
Sorry, no idea on these two. As for the first one, what happens if you connect CAN1 to CAN2 on PC2 (no connetion to PC1)? I don't know anything about the IXXAT card. Is there some switch that internally bridges the two ports?

Try reset MacBook (Black) .."installation failed" error

Hi,
I tried to reset my MacBook completely and deleted the old part. And know i'm
Trying to install snow leapord again, but after installing for few minutes i says
"installation failed" can't copy the documents ...." restart and try again. It keeps doing this!
Anyone knows how to fix this???!

Do you have at least 1 GB of RAM?
Is your data backed up?
Does your disc look like * and not say DropIn, OEM, Or Update on it?
If you answered no to any of these questions, you should be able to answer yes to each one before proceeding. If you need clarification, feel free to ask.
- * Links to my pages may give me compensation.

Oracle 11g installation fails

Hello All,
I am trying to install Oracle 11g R2 in Cent OS 6 , when i try to install i get the following error message and the installation fails.Can any body help with this issue.
Exception in thread "main" java.lang.UnsatisfiedLinkError:
/tmp/OraInstall2011-07-24_11-16-24AM/jdk/jre/lib/i386/xawt/libmawt.so:
libXext.so.6: cannot open shared object file: No such file or
directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
at java.lang.Runtime.load0(Runtime.java:769)
at java.lang.System.load(System.java:968)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1509)
at java.awt.Toolkit.<clinit>(Toolkit.java:1530)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

Hello;
I used several versions on Linux but not that one.
That said the error :
libXext.so.6: cannot open shared object file: No such file or directoryResolution : Install the libXp package
So you are missing at least one of the "extra" packages needed for an Oracle install.
I found some posts that make me believe Cent 6 isn't quite ready for Oracle 11 :
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=32128&forum=55&post_id=137271
http://sfentona.net/wiki/index.php?title=How_to_install_Oracle_11gR2_on_CentOS_5.5
Best Regards
mseberg

Why can't I open my retail Tiger installation dvd although it boots

Hi,
I have problems with opening my original Tiger installation dvd. I already installed Tiger, but I need some data from the optional installs on the disk. But I don't get any access to the dvd. Its shown on the desk but whenever I try to open it it just failed. I can boot it by pushing C and starting from the dvd but I have no access when I just put it into my internal diskdrive. Does anyone have an idea?

Hi Stefchen,
Welcome to Apple Discussions!
Here's a great installer guide for installing OSX:
http://www.macdevcenter.com/pub/a/mac/2005/04/29/tiger.html?page=2

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.

Can I start up my new imac (Snow Leopard) from a Tiger installation disc?

Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc, I've tried starting up with my old Tiger installation disc, but to no avail... At the risk of sounding a little stupid, should Apple have given me a Leopard disc with my purchase?

bgaribay wrote:
Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc,
I've tried starting up with my old Tiger installation disc, but to no avail...
you can not use the tiger disk. you need to use your snow leopard disk. what happened to yours? every new computer comes with one. it's called install disk one and is packaged with every new computer.

Installation Failed The installer can't install some files in "/".

The full message is
Installation Failed! The installer can't install some files in "/". Contact the software manufacturer for assistance.
I first received this message when trying to upgrade Pro Tools from 8.0 to 8.0.1 a prerelease for snow leopard. I tried numerous things such as repairing permissions, as well as some pro tools specific things and to no avail. Still got the same error message.
So then I tried completely uninstalling and deleting all things pro tools from my computer. After a clean uninstall and removing all traces of pro tools I proceeded to try and re-install pro tools from my pro tools 8 disk. About a minute into the process I get the EXACT same error message.
I know this issue has been going on since even before snow leopard. I really need to get pro tools installed and running again or at least be able to get the program installed. I've isolated pro tools out of the mix because its been several different installers and even an installer from a dvd. I know this is a Snow Leopard or plain OS based problem. I have repaired permissions, created a brand new user, wiped clean and started over. I don't know anything else to do. PLEASE HELP???!!!

Hi Dean@mac & welcome to the forums...
Any specifics why it wants to install to / instead of Applications, as an example?
Seen these threads yet?
http://discussions.apple.com/search.jspa?search=Go&q=pro+tools
One thing to help investigate the issue is to create a new user just for testing that is stock with no add-on's etc., then login there and try to install. If it works there you can bet there is something unique to your original account that is borking that install - otherwise the issue is most likely global to your system and you might be out of luck until/unless a reportedly qualified version becomes available, etc.
Good luck in any case.

Installation fails via Creative Cloud App manager on windows 8 - can't find log

No information given in Creative Cloud App manager.
I click on "Learn More"
and get a window that tells me the following
Installation failed
Errors encountered during installation.(7)
More Information
"More information" is a link/button but clicking it does nothing.
Where are the logs on windows 8?

You can try checking out the logs, at http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
And this might be handy too: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck,

If my Tiger installation fails, can I go back to 10.3.9?

Similar Messages

Maybe you are looking for