If none of these solutions work, summarize your question in a sentence

Just install the water fox, but I find it below there is always a dialog box, display: "need a plugin to display the content", how to get rid of it

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Create a new profile to solve the problem
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

TS1389 What do I do if none of these solutions worked?

I am still getting the error box after trying these solutions.
I couldn't find the SC info folder on my computer.
orthew

If only a small number of songs are affected, delete and redownload those if doing so is free in your country.
(68330)

Yahoo has replaced Google in my search box... I have researched all previous answers both here and in Google, but none of these solutions work as Yahoo keeps switching back!

I have read these sites plus a few others, and nothing works:
http://support.mozilla.com/en-US/questions/688704?s=yahoo+changed+search+settings&as=s
http://support.mozilla.com/en-US/questions/683682?s=yahoo+changed+search+settings&as=s
http://support.mozilla.com/en-US/questions/688704?s=Firefox+changed+my+default+search+engine+from+Google+to+Yahoo&as=s
http://news.cnet.com/8301-13880_3-10277784-68.html
Any help greatly appreciated!

After MUCH more research, I did find a solution that worked... search all the files in my computer for anything relating to Yahoo and deleting every reference to it, per this link:
https://support.mozilla.com/tiki-view_forum_thread.php?comments_parentId=593063&comments_offset=20&comments_per_page=20&forumId=1
I was horrified and disgusted how many Yahoo files were on my NEW computer, some 27 files... parasites!! I not only deleted them, but immediately purged my Recycle Bin. LOL
Delete all yahoo files completely out of your computer and your life will go back to normal.

HT201210 None of these solutions are working.

None of these solutions are working. I plug in my newly restored iPhone and under the category in iTunes, I have the option to click it. When I do so, I get an empty box on the screen, below a Apple logo on the left and a padlock on the right. Any ideas to solutions? I puzzled the people at my local Apple store.
Other than not connecting, my phone is fully functional. I can place calls and send messages, get online and fi my settings the way I want. I just cannot connect to any iTunes (I've tried three)!
I have the newest software on my phone and the newest upgrade of iTunes available.

What do you mean none of these options? What have you tried so far? Are you referring to the 5 R's described here: http://www.apple.com/support/ipod/five_rs/classic/
B-rock

TS1702 None of these steps work, also tried hard reboot. . Cannot update or install new apps. Just says waiting. Internet data working fine. My iPhone works fine. This is all on my iPad

None of these steps work, also tried hard reboot. . Cannot update or install new apps. Just says waiting. Internet data working fine. My iPhone works fine. This is all on my iPad

Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, reboot the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
Sometimes resetting all settings can help as well. Settings>General>Reset>Reset all settings. If you do that - you will have to enter all of you app and device preferences again.

HT201398 unable to install app,none of these solutions helped me could someone give me new solutions please

unable to install app,none of these solutions helped me could someone give me new solutions please

What app?
What 'solutions'?

How do u change where firefox stores your downloads? I have changed location in tools/options and done a firefox reset but none of these are working

Please help if u can!

It is still not working, I specified the folder I wanted the item to be saved in, searched windows explorer and find files/folders but it never appeared

Error #2048: Security sandbox violation: Urgent Checked the forum none of the solutions worked

Hi all,
    I am new to flex . I am trying to connect to my localhost using the XMLSocket like below
    var xmlsock:XMLSocket = new XMLSocket(); // Line #187
    xmlsock.connect(127.0.0.1, 8080);
    xmlsock.send(xml);
But after a Minute I get this below error
Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: app:/main.swf cannot load data from 127.0.0.1:8080.
    at main/handleLogin()[C:\Documents and Settings\Vulcantech\My Documents\Flex Builder 3\src\main.mxml:187]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.rpc.http.mxml::HTTPService/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[C:\autobuild\3.2.0\framewor ks\projects\rpc\src\mx\rpc\http\mxml\HTTPService.as:290]
    at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\AbstractInvoker.as:193]
    at mx.rpc::Responder/result()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responde r.as:43]
    at mx.rpc::AsyncRequest/acknowledge()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\ AsyncRequest.as:74]
    at DirectHTTPMessageResponder/completeHandler()[C:\autobuild\3.2.0\frameworks\projects\rpc\s rc\mx\messaging\channels\DirectHTTPChannel.as:403]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
Thanks in advance
Balaji

Hi Alex,
   Thanks for the Link . I saw the link and have done the same steps as said in that . I have created a crossdomain.xml file in my 127.0.0.1 and i can also see that the policy being accepted in the "C:\Documents and Settings\username\Application Data\Macromedia\Flash Player\Logs" . I have pasted the lines in policyfiles.txt below.
    OK: Root-level SWF loaded: app:/main.swf
    OK: Policy file accepted: http://127.0.0.1/crossdomain.xml
   But I still get that sandbox violation error. I have tried the below solutions and none of them worked
       1) security.allowDomain("*");
       2) crossdomain xml in the webroot of the accessing server like below
                    <?xml version="1.0"?>
                     <!DOCTYPE cross-domain-policy SYSTEM “http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd”>
                     <cross-domain-policy>
                        <site-control permitted-cross-domain-
policies="all" />
                         <allow-access-from domain="*" to-ports="*" />
                   </cross-domain-policy>
       3) I saw that adding the Application path in the "C:\Documents and Settings\username\Application Data\Flash Player\#Security\FlashPlayerTrust\flexbuilder.cfg" will remove the sandbox violation but this also didnt work
       4) "Project - Properties - Flex Compiler - Additional compiler arguments:" add   -use-network=true and then recompile and post to server
       5) I have also checked the policy file logs
Thanks in advance
Balaji

Ipod touch won't start up beyond apple on screen, just keeps flashing. Tried restoring but I continually get error messages but none of the solutions work. Help?

My Ipod touch stays on the start up screen with the apple and just blinks. I have tried all suggested
resolutions but none work. I have tried to restore it but continually get error code 1611 or 9. I have
tried all of those solution to no avail. Any other suggestions?

If you tried all the suggestions of:
http://support.apple.com/kb/TS3694
You likely have a hardware problem since the article says a possible cause of the 1611 error is a hardware problem. I would make an appointment at the Genius Bar of an Apple store.

QuickCluster keeps vanishing with Compressor 4 and none of the solutions work, even booting from a clean system disk

I have a 2009 8-core MacPro with 16gb of RAM. QuickCluster started to disappear about three months ago. Apple support suggested that I log in as a new user and that worked for a while but the QuickCluster disappeared again. I decided to create a new system boot disk with nothing but 10.7.3 and FCPX and Compressor on it, nothing from my previous user settings. That worked for about two weeks and then the QuickCluster disappear as well. I updated Compressor last week and remarkably the QuickCluster returned....until today. Now I am back to using Adobe Media Encoder for fast encodes and I am not happy. Sure it's fast but Compressor is a much better program.
Before you suggest it: I have used Compressor remover, and Compressor fix from Digital Rebellion - no change. I have trashed library files according to Apple's support pages - no change. Permission repair - nothing. There must be something that is not in the typical pathways that Qmaster uses that is getting corrupted. Any suggestions?

Thanks for helping. A screen shot of something that isn't there might not be helpful. Let me see if I can describe the problem better.
Upon opening the Qmaster menu, I have the option to enable QuickCluster which I can do. Then the oddities start: first I get a system administrator password window which never happened before. I am logged in as an administrator and QuickCluster before always just enabled. I enter my password and close the Qmaster window however when I submit a batch, the QuickCluster option isn't there. Sometimes the computer isn't there either! (When that happens I have to trash the Qmaster library files or no rendering at all.) When closing Compressor, the system password window comes up again and if I don't enter it Compressor will not quit. Upon reopening Compressor, after the window asking if I want to enable shared services is clicked yes, the system password window comes up. If I cancel it then the QuickCluster is not enabled and Compressor behaves normally without any more requests for the system password. If I enter the password, the QuickCluster doesn't appear in the submit window and there's a chance the computer won't either.
This has occured the same way when the computer is booted off my normal system drive or the clean system boot disk that has none of my personalizations.
- William

TS1389 None of these options work for me. Please help!

I'm trying to do this on Windows 8, and I'm using an Administrator account, therefore the "Authorize using the correct account name" is the only option that I could try, and yet when I go into "Get info" there is no Apple ID. What do I do? Please help!
UPDATE: Now resolved. Thanks

Ok, here's how I find the version on my laptop:
1. Go to the Control Panel
2. Click the green link for System and Maintenance.
3. At the top in "Welcome Center", click "Find which version of Windows you're using".
4. At the top in the section that opens with Vista information, look for the "Show more details" link. Click it.
5. In the next page, look for "System". At the bottom line it will list "System Type". Mine says "64 Bit Operating System" (I have Vista Home Premium)
Hope this helps,
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

TS1559 if none of these steps work then what?

have done everything i could, and nothing worked. what should i do now? will apple give me a new one if i go the store?

If the issue is determined to be a hardware defect, then yes.
If the issue is determined to be caused by user damage (i.e. dropping the device, getting it wet) then you'll be provided the option of an Out of Warranty replacement for $199.

TS1389 None of these suggestions worked.

I recently purchased the Beach Boys album and several songs won't play and I get proompted to enter my Apple ID, etc. each time and still doesn't play. I've done all of the above and everything check out as it should. What now?

If only some items on the album are throwing the authorisation message at you, that suggests that those tracks are damaged.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the entries, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

HT201412 And if none of these steps work, any suggestions?

Tried all of the above steps with no luck

Might be hardware then and you will need to get it serviced.

Summarize your question in a sentencewhen i open a youtube videos it doesnt open and it shows the folloing statement"You need to upgrade your Adobe Flash Player to watch this video. Download it from Adobe."

when i open a youtube videos it doesnt open and it shows the folloing statement"You need to upgrade your Adobe Flash Player to watch this video. Download it from Adobe."

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
See:
* https://support.mozilla.com/kb/Managing+the+Flash+plugin
* https://support.mozilla.com/kb/Installing+the+Flash+plugin
* http://kb.mozillazine.org/Flash
You can get the Adobe Flash Player here:
* http://get.adobe.com/flashplayer/
* http://get.adobe.com/flashplayer/otherversions/
You can visit the Adobe welcome and test page to verify if the installation has been successful.
* http://www.adobe.com/software/flash/about/

If none of these solutions work, summarize your question in a sentence

Similar Messages

Maybe you are looking for