If Process Chain Fail in Production?
Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet Rana
Hi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM
Similar Messages
-
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Process chain failed at COLLAPSE PROCESS TYPE ?
HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks -
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
Process chain failed on creating Indexes
Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
CatherineIf we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ?? -
Process chain Failed!!! please help
Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
ThanksI've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!! -
Process chain failed during DTP
operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solutionhi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh -
Process Chain failed at Delete PSA event level
HI Every one,
I am monitoring process chains, which are running on daily basis.
I have one <b>Delete PSA</b> process chain, this chain contains only two events
1. Start Event 2. Delete from PSA.
Process chain failed at<i> Deleted from PSA</i> event level.
Below is the error message I got from the process chain screen.
"Data inconsistency in /bic/b0000231000 table,partition was not deleted"
"Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
Please help me by giving possible reasons for this error message and solution for this problem.
Thanks in advance.
Regards,
Narayana K.hi,
Are you deleting the PSA requests using abap program?
Regards,
Vijay -
Master Data Process chains failing due to special charecters?
hi experts,
we have done all the master data(FI,SD,LO,QM,PM,MM,PP,PS) and created process chains and transported into production system.
when we run the process chains we are facing lot of issues regarding special charecters.
for example. 0MAT_VEND_ATTR Data source.
MATERIAL VENDOR (field - IDNLF).
'UDGÅET
&''UDGÅR
&''UDGÅET
&''36/5599/LED./FÆLLES
&''SØTRANSPORT &
those are the special charecters are coming when i try to execute through RSKC the above Material Vendors, its giving different special chars for different MATERIAL VENDORS like below.
FÆLLESSØTRANSPORT
04/5160/FORSØGSAFD.
(5150)FORSØGSAFD.
like that there are about 15 master data chains are failing.
due to that reason the below transcation chars are not executing.
please suggest me is there any routine or is there any procedure to take care of unpredicted special charecters loading successfully into BW.
regards
venuscmI don't think its a global setting problem.
Permit the char in RSKC...
Check with the functional team why they are getting Special char values in the loads. ask them to rectify the special char so that you can extract the same to BW side.
go through the blog links provided earlier in my post...
Check the below link which might be of some use to you,..
/people/jyothi.velpula/blog/2010/12/23/removing-invalid-characters-using-field-routine
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
Edited by: prashanthk on Jan 3, 2011 5:35 PM -
Process chain failed at info package level
hi experts,
i have a process chain for IS_QLTMR, it is loading data to IC_QLTMR, every day it is running successfully, but today at infopackage it has failed in details tab it is showing bellow error message.
Object requested is currently locked by user ALEREMOTE
what is it mean, how can i solve my problem,
please advice me to solve this,
thanks in advance,
venkatThis time its correct. As last time , it was locked, so may be it has picked only 18000 records before lock occures.
However, to know the correct data, go to your source system and check in RSA7 how many records are there.
For active update rule, check your update rule whther its active. If not, then you have to activate the update rule. If you are in production and you dont have authorization, then raise a ticket for this.
Thanks...
Shambhu -
One of the APD Process Chains fails.
Hi All,
I have created two different process chain (PC1 and PC2 for example)which use program RSAN_PROCESS_EXECUTE to execute the two diiferent APD (APD1 and APD2 for example) . PC1/PC2 executes APD1/APD2 respectively.Both the process chain have the same trigger event.
The issues is that only one of the process runs successfully and the other fails at the program RSAN_PROCESS_EXECUTE
For example if the PC1 runs PC2 fails at the program RSAN_PROCESS_EXECUTE and vice versa.
The Error message it displays is
1) Job started S 00 516
2) Step 001 started (program RSPROCESS, variant &0000000155350, user ID ALEREMOTE) S 00 550
3) Spool request (number 0000030567) created without immediate output S SY 355
4) Processing completed with errors. See spool list E RSAN_PR 22
5) Job cancelled after system exception ERROR_MESSAGE A 00 564
Thanks
Rajivhi,
To check the detailed error message for failure of APD, check in RSANWB, goto that APD and click on monitor.
You will find the spool over there.
Check the error message and let us know, so that we can try to help you out.
It can be due to authorization issue or due to low memory.
Regards
Lavanya -
Process chain fails every time at "roll up of aggregates"
hi all,
A process is deffined in such a way that... start
i
i
Delta loads to infocube1(load) deltaload to infocube2(load) deltaload to infocube3(load)
i i i
i i i
delta load of aggregate(cube1) delta load of aggregates(cube2) delta load of aggregates
Every time when this process chain get executed,this fails at delta laod of aggregates step.If i repeat again it works fine.But repeating is not a solution for this.So,i want a permanent soltuion for this..
Please guide me what to do?and explain me why this happens.
Error message:-process rollup of filled aggregates/bia indexes,variant delta load of aggregates
Thanks( in advance)
MoushmiHi Moushmi,
Have you checked if the system has processes available while the chain is running? It could be that your system is overloaded and the aggregates wouldn't roll up because you have no processes or available memory.
Check with your Basis resource. Also, try changing your chain to do only 1 at a time. Do you have many aggregates to load, are they big, and most important are they being used.
Kathleen
Maybe you are looking for
-
PDF Preview for a PO template with polish characters shows question marks
When I view the PDF using application I see the polish characters(Boilerplate text) as question marks. But when I view it through XML Publisher Dsktop version 5.5.0 it is fine I have download the new version of adobe 7.08 and I can see the polish cha
-
Delivery Receipt After Sending Mail Using JavaMail ?
Hi Friends, I have written an application using JavaMail which would be used to send mail using my organisation's SMTP Server.I would like to include the following functionality in it.Just as Microsoft's Outlook has an option to get Delivery Receipt
-
Morning Last night I filmed/recorded some mates doing an acoustic set, I edited it together on final cut express and audio with logic studio. I've exported it and the .mov is around 850MB for a 3.5 minute video. I don't seem to be able to figure out
-
I am on 8.1.14 SIA with OSES 11g installed on Windows 64-bit. I followed all the instructions. When I am indexing the Service requests, I can see couple of files getting placed in ssc\xmlidata and getting the SUC files to err folder. When I go to sch
-
Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?