If SAP FICO as standalone system with other legacy system.
Hi All,
If SAP FICO as a standalone sytem with other legacy systems what is the impact on the SD module.
For eg: what we will miss or cant do the transcations with the SD perspective in SAP.
Thanks
ANGKS
Hi,
1. Yes all the dat needs to be copied
2. You can just assign the users in your orginazation structure to the profiles(Master data specialist, steward etc.) in BRF+
3. After copying the data to your standalone ECC 6.0 instance, all the process of data governance happens on your standalone system and once it is done you can replicate the data to your SAP 4.7 system. According to my experience, no functionalities will be missing.
Regards
Goutham Kanithi
Similar Messages
-
However, we've had issues with other legacy systems and programs for outlook
I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you! -
How can we integrate SAP R/3 4.6C with SAP EP?
Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP. How can we integrate the SAP R/3 4.6C functionalities into the SAP EP?
Thank you in advance for your help.
Best regards,
BobHi Bob,
Upgrading to ECC 66.0 wouldn't effect your Developments (since everything will be custom, and upgrades will not effect the custom applications) and Customizing (there will be enhancements based on which you do customizations and even that will not be effected with upgrade) unless you change the standard using Dev Key.
[https://wiki.sdn.sap.com/wiki/display/ERP6|https://wiki.sdn.sap.com/wiki/display/ERP6]
Please go throught the link for all the details on upgrade.
And you need to see whether there are applications available in WebDynpro for ABAP or Java for your req. and these you can find in latest BP for PM if there are any?
Hope this helps.
Cheers-
Pramod -
Hi Experts SAP FICO,
I have five years of SAP EXP in FICO module, including implementation and support projects.
I am plannig to go for SAP FICO certification ( Without Siemens and other), as i have hands on knowledge on FICO.
Pls suggest me how can i go for FICO certification on my own by paying the exam fee.
Pls suggest.
Jaya.First and foremost important thing is that you should go through the study materials prescribed atleast four or five times. You will be asked questions only from those.
To know the procedure for appearing for certification, check this thread based on the assumption that you would appear for certification in India
[Re: Regarding Certification |Re: Regarding Certification]
thanks
G. Lakshmipathi -
GRC Compatible with other SAP Systems
Hi experts,
I’m trying to understand the compatibility of GRC (BRM, EAM, etc.) with other SAP systems. The question came after looking at some of the configuration from SRM since I see the GRC Plug-In component installed in the system but then I don’t see the actual plug-in on SPRO. I was looking for similar information on the GRC installation guide and Config. Guide but so far no luck. Can someone point me in the right direction? Even better if there is an official document. ThanksHello Jonathan,
According to the installation guide of the latest release of GRC 10.1:
Install SAP solutions for governance, risk, and compliance (GRC) 10.1
on a standalone system as opposed to installing them along with an SAP
Business Suite or with any SAP Business Suite components such as
ERP, SCM, CRM, OR SRM.
The cause of the problem is because the SRM/APO system IMG root node is
different from SAP Basis IMG root node. So for the customizing SPRO
to show up for GRC under SRM system, you'd have to check the node as
described in note 1591667.
Best Regards,
Fernando -
E Recruitment Standalone system needs to connected with portal
Dear E rec experts
I am having e rec standalone system and a SAP HR system , Presently portal is connected with SAP HR system, I need to connect the portal to E rec server as well . Our Basis team did the SLD and SSO configuration , and portal system object also have been created to point the portal with Stand alone system . still i can not connect to e rec system with the portal.
Can any help with the java connector component name for e rec stand alone system with HR system , if jico is the solution for this issue.Else Please advice me any other solution -
Regards
AbhiHi Abhi,
Jco is for Java components. E-recruiting does not use Java Web Dynpro, but rather BSP and ABAP WD.
You link the systems via RFCs:
Call SM30, table T77S0 and check following parameter:
in RECFA HRRFC the destination to the HR system should be maintained
for this destination you can check if the connection is working by going to transaction SM59 -> ABAP connection -> double-click on the name -> button "connection test" to confirm the connectivity.
Afterward, you have to create the ALE distribution model so that you can transfer data via PFAL tcode and check the received Idocs on T-code BD87.
Regards,
Bentow -
Dear,
Plz guide me on Starting with SAP FICO.
I am engineering graduate & wants to work on SAP FICO.
Completed studying -- Accounting for Non Accountants.
But now i am in a dilemma as for now which topic to start with.
Someone says TFIN20, TFIN22, TFIN50 etc & some says to start with AC205 series Pdf's.
So plz guide me step by step method as to which Pdf book should be started - from starting to end to learn SAP FICO in serial order.
Also do provide me links for the updated pdf's of SAP FICO ECC 6.0.
Thanks in Advance,
Vivek.So plz guide me step by step method as to which Pdf book should be started - from starting to end to learn SAP FICO in serial order.
until you work on it and solve some real time problems you don't get full knowledge in SAP module. so try to work on SAP system.asking for authorized books/links is against the Rules of SDN forum. search for FI & co (separate certification for both) in GOOGLE, SDN. you will get so many links & documents.
regards
Mahesh -
Sap FICO Certification for Financial Accounting with mySAP ERP 2005
Hi,
I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
Topic areas:
SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
If anyone have the Material for above topics, please send me my mail Id: [email protected]
if anyone appeared recently for certification for the same code, please send model questions and answers.
i will be very thankfull to you.
Regards,
SatyaprakashHi
I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
Request you to send me whatever the material you have in this regard.
thanking you in advance
Suri -
CA with SAP FICO and Japanese Language
Hello Friends,
I am Kapil studying ( final group ) to become a Chartered Accountant.I want to do SAP FICO Module from SAP Certified Education Center in Delhi,India.I have also done One Year Intensive Advanced Diploma in JAPANESE Language from Delhi University.I have also done JLPT Level 3.
I have following queries :--
1.Which one is the best SAP Education Center in Delhi both in terms of education and placement ?
2.What are the job prospects after completing CA n SAP FICO in Japan ?
I will be thankful to you if you could provide me guidanc eon the above issues ..
THANKS..
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PM
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PMChartered Accountancy with SAP FI-CO itself is a lethal combination. Looks like you love Japan or there is someone there whom you love. There are quite some companies in Japan that have implemented SAP (you can get into support, upgrade, enhance kinda roles) and there are also new implementations in the pipeline. As far as training goes, go to any SAP Education Partners (Siemens, etc.). Give your full time to demos and practice sessions on SAP when in training - reading books only will not help.
Good luck. -
Steps to connect XI with other systems
Hi all,
What are the steps to be followed in general to connect a SAP system with a third party system using XI. It will be more helpful if I get information on the settings needed to be done on the 3 systems to get integrated (SAP,XI,Third party system).
I listed down the settings needed to be done in each of the system as far as I know. Correct/Update the list if you know more.
<u>SAP system:</u>
RFC destination from SAP --> XI
<u>XI system:</u>
WEB AS ABAP technical system in SLD
Third party system in SLD
Do we need a RFC destination from XI --> SAP?
Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system.
Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.
Your help will be appreciated
Regards,
SakthiHi Sakti,
<b>SAP system:
RFC destination from SAP XI</b>
correct
<b>XI system:
WEB AS ABAP technical system in SLD
Third party system in SLD</b>
correct
<b>Do we need a RFC destination from XI  SAP?</b>
during installaltion the connection is done...
see here in details...
<b>SAP XI</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<b>SAP R/3</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<b>In SLD System Landscape Directory</b>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
<b>Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system</b>
No need!!
<b>Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.</b>
during the creation of Business ssytem...give the same logical name !!!
regards
biplab
<b>**reward if it helps u!!!</b> -
Integrtion of SAP with other third party tool
Hi,
In my company there is a software called Axpert which handles accounts receivable transactions.
Now we want to post the data or integrate it with the sap.
Can anyone help me how SAP is integrated with other softwares.
~Regards
AlokHi,
Initially you want to make sure your third party application excepting the data format both Inbound and outbound integration.
Then look for the accurate solution. The number of interface format and tools are available to integrate SAP and third party systems.
Thanks,
Boopathi -
Integration of PM with other modules (PP, MM, FICO, QM)
Hi Experts,
I am new to PM module and would like to know about the integration of PM module with other modules.
1. Integration of PM module with PP module.
2. Integration of PM module with MM module.
3. Integration of PM module with FICO module.
4. Integration of PM module with QM module.
Are there any other modules which have integration with PM?
Please let me know any extra information in-addition to the above, regards to integration. Thanks In Advance for your answers.
Thanks & Regards,
SupriyaHi
simple search with google you can find variouts hits
https://scn.sap.com/thread/1752858
http://scn.sap.com/thread/838452
http://www.erpgreat.com/plant/sap-pm-integration-with-other-modules.htm
Regards
Thyagarajan -
Connectivity of BODS with other ERP systems
Hi All,
Need your help.
Can BODS connect with other ERP systems such as Lawson, Oracle EBS, Symix, MAPICS and Fourth Shift using adapter or anything?
Please Help.
Thanks Much,
PurnimaHi Purnima Rai,
Hope the below link will help you out .
https://websmp106.sap-ag.de/~sapidb/011000358700000441762013E
Regards,
Akhileshkiran. -
Key differentiation in ERP SAP Finance and Controlling with Other ERP Appli
Hi ALL,
I want to know one important thing in ERP SAP Application, What is the Key differentiation in SAP Finance and controlling with other ERP application like Oracle, PeopleSoft...
And what is the main feature in SAP Finance and controlling with other ERP application. Tell few SAP FICO features compare to other ERP application
thanks
KiranHi ALL,
I am waiting for you reply kindly cooperate in this
thanks
kiran -
With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.
From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.
Maybe you are looking for
-
ICal displays twice the same date on the calendar
Ater upgrading to 10.6 and 10.6.1, iCal messed up previous calendars, duplicating a day in the calendar. Specifically, in my case, "Saturday, 17th October" appears twice, one after the other (in portuguese). This affects all future events, which now
-
Errors when using imagex on T500 Laptops
Greetings, I've been using windows PE and imagex to deploy a standard image to my laptops and desktops which are running Windows Vista (I've used it for Dell Desktops and some T61 boxes). I've successfully used sysprep to prepare the image (sysprep
-
Would love to see a few things added...
Would love to see a few things added... the ability to easily add noise and to have more font adaptability. I usually have to go to another app for this. Any chance of these being included in app?
-
24 Hour Metrics Report return null report
We have problems in VMS 2.3 (IDSMC/SecMon 2.1) to run the 24 Hour Metrics Report. It seems to run, but returns following error on opening the report : Error loading report: null.
-
I can not get the program to reset the factory defaults, enough to open the mini bridge tab...... I have tried numerous times and it does not open and it is needed to be able to view two files in the application window and to be able to work on them