If the delta is break in my R3 production system.

Hello All,
How to initialise the delta if the delta is break in my production system in R3. The delta is fetching records in more then 1 ODS. Once set up how to check if no single record is missed.
Is there any proocedure how to take care of the existing records in BW production so that we get all the records from R3 to BW.
Thanks,

Hello Sandeep,
What do you mean by this ??? "Is there any proocedure how to take care of the existing records in BW production so that we get all the records from R3 to BW"
Regards,
Jeannie

Similar Messages

How to look at the delta (daily load) records from R/3 system to BW master

How to look at the delta (daily load) records from R/3 system to BW master on a particular date, let us say,
today delta happened from R/3 to 0vendor in BW , how to view what are all the records came to BW - 0vendor (from R/3) in today's delta.
Regards
Siva

Hi,
youi can see the data in the PSA.
Just go to the request in monitor tab and in the monitor and in the left top click on the PSA button.
In the nest window give the selection on the number of records you want to see from that if you want to see all the records give the number which get laoded in that request.
this will show you the data loaded in that request.
Hope it clears
thanks

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

How to transport the connection in production system

hi
I have a doubt releaated to connection between SAP BI and Xcelsius.
We have a development server on which i have created universe and then on it Qaaws and finally Xcelsius dashboard.
My doubt is in future they will transport the SAP BI system from Development system to Production system.
In this case Universe ,Qaaws,Xcelsius will work?
will i have to develop this again in production system, or any how it will work with production system?
How excetly development work here when we have connection between SAP BI and Xcelsius in different system from development to quality and then in Production?
Thanks,
Piyush

Hi
assuming that the objects (keyfigures, characteristics, multiprovider) of the underlying query are available in your production system you do not have to create your universe again, rather change the connection data to your SAP server (like SYSID, client number etc) in the universe connection.
Additionally if you are working ith BO XI 3.1 I would suggest to take a look to the LifeCycleManager, a tool which can simplify the transport process from your development to your production environment.
Regards,
Stratos

Delting Objects from production system

Hello All,
I need to delete some of the Infoobjects,ODS and Infocubes from my Production system.
for e.g:
We have Inserted infoobject ZXX as data target,so it is available under infoprovider.
For this,we have update rules ZYYY.
In the Infoprovider tab: I right click on the Infoobject ZXX and selected the "Remove Infoobject as data target option".So update rules and the infoobjects were removed from the Infoprovider tab.
Also I deleted the infosource ZYYY.
While deleting the Infoobject ZXX from the Infoobject tab,it says "the update rules ZYYY still exists and hence cannot delete the data"
Please let me know,how can i delelt the Infoobject and the update rules.
Any help will be appreciated.

Hi,
Make sure that you are having prober authorizations to delete the objects. If you have, try to log on again. Also Check for Data flow upward objects from this object.
Edited by: P. Saravana Kumar on Apr 1, 2009 6:01 PM

Why editing iview id break the delta link in the portal page?

For some reason, everytime I edit the iview id, the delta link in the page will be broken.
After I changed the iview id, the iview id that I added as delta link in portal page remain same, and seems like become a separate copy , rather than the original delta link.
This frustracted me as I have to remove the old iview , and add the new edited iview into the page again.
Why is this happen? (I am very sure I didn't accidentally add the iview as copy, instead of delta link)
By the way, I am in NW04s SP9.
Thanks for help.
Kent

Hi Kent,
> (I am very sure I didn't accidentally
> add the iview as copy, instead of delta link)
The wording "I am very sure" points to the fact that you didn't really check and re-try it?!
I just checked it on NW04 / SPS18 (which corresponds to SP09 on NW2004s) - and it works like a charme. The delta-link on the test page points to the new ID (as the ID-Change-Wizard announces it).
As I have no 2004s installation at hand, I would suggest really to re-check if you are really talking of a delta-link. If it really doesn't work on SP09 while it works on SP18 in parallel, you would have to open an OSS message. Anyhow, this really should behave analogously...
Hope it helps
Detlev

Error while resetting the delta in ODS (BI 7.0)

Hi all,
I face a problem in delta resetting...need your help... Thanks..
I have an ODS-1 which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1 has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
NO issues till now....
I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
Let me know your suggestions.... Thanks!
Regards
Ayyappan.V

Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit.

Get back the Data mart status in ODS and activate the delta update.

I got a problem when deleting the requests in ODS.
actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
- the request 132185 already retrived by the data target BP4CLT612.
-Delta update in BP4CLT612 must be deactivated before deleting the request.
- Do you want to deactivate the delta update in data target BP4CLT612.
I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
in the same it happened inthe 3 ODS's(3rd level).
I got clear that if we load further data from source system. it will load all the records from starting.
so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

Hi Satish,
U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
To correct this..
To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
Do similar from L2 ODS to Cube.
then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
see below thread..
Urgentt !!! Help on reloading the data from the ODS to the Cube.
cheers,
Vishvesh

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

Lync 2013 - How to find out if the Full or the Delta address book file is being downloaded

Hello
We have had various issues since upgrade to Lync 2013, specifically, Lync 2013 address book generation and download (bandwidth usage impact).
I was wondering if there is a way to find out which version of AB is downloaded; FULL AB or the Delta file ?
Thanks for your assistance,
Luca

Full address book contains a large set of user and contact object attributes.
Delta files contain incremental updates.
If a client is accessing the URL for the first time and successfully connects, the client attempts to download the current full data file. On subsequent days, the client attempts to download
a delta file based on the last full synchronization date.
Open Lync Configuration Information, check the ABS Server URLs, you can determine where the address book information comes from.
Lisa Zheng
TechNet Community Support

How can I know the delta field for CO-PA datasource?

Hi,folks:
How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
Full points will be given to u.
Martin Xie

Dear Martin,
The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
See this link...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
Also check ROOSOURCE in R3, asmentioned by Dinesh.
Hope it helps.

Issue in the Delta load using RDA

Hi All,
I am facing an issue while trying to load delta using RDA from R/3 source system.
Following are the steps followed:
1. Created a realtime Generic Datasource with timestamp as delta specific field and replicated it to BI.
2. First I have created the Infopackage(Initialization with data transfer) and loaded upto PSA.
3. Created a standard DTP to load till DSO and activated the data.
4. Then created a realtime delta infopackage and assigned it to a Daemon.
5. Converted the standard DTP to realtime DTP and assigned the same to the Daemon.
6. Started the Daemon, giving an interval of 5 minutes.
In the first time, Initialization with data transfer is taking the records correctly. But when I run Daemon for taking delta records, its taking all the records again, i.e. both the previously uploaded historical data and the delta records).
Also after the first delta run, the request status in the Daemon monitor, for both Infopackage and DTP changes to red and Daemon stops automatically.
Can anyone please help me to solve these issues.
Thanks & Regards,
Salini.

Salini S wrote:
In the first time, Initialization with data transfer is taking the records correctly. But when I run Daemon for taking delta records, its taking all the records again, i.e. both the previously uploaded historical data and the delta records). .
If I understand you correctly you Initially did a full load. Yes? Well next you need to do intialise & after that delta.
The reason is that if you will select delta initialisation & initialisation without data transfer- it means delta queue is initialised now & next time when you will do delta load it will pick only changed records
If you will select delta initialisation & initialisation with data transfer- It means delta queue is initialised & it will pick records in the same load.
As you know your targets will receive the changed records from the delta queue.
Salini S wrote:
Also after the first delta run, the request status in the Daemon monitor, for both Infopackage and DTP changes to red and Daemon stops automatically.
I take it the infopackage has run successfully? Did you check? If it has and the error is on the DTP then i suggest the following.
At runtime, erroneous data records are written to an error stack if the error handling for the data transfer process is activated. You use the error stack to update the data to the target destination once the error is resolved.
To resolve the error, in the monitor for the data transfer process, you can navigate to the PSA maintenance by choosing Error Stack in the toolbar, and display and edit erroneous records in the
error stack.
I suggest you create an error DTP for an active data transfer process on the Update tab page (If key fields of the error stack for DataStore objects are overwrite On the Extraction tab page under Semantic Groups, define the key fields for the error stack.) The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer
it to the target that you have already defined in the data transfer process. Once the data records have been successfully updated, they are deleted from the error stack. If there are any erroneous data records, they are written to the error stack again in a new error DTP request.
As I'm sure you know when a DTP request is deleted, the corresponding data records are also deleted from the error stack.
I hope the above helps you.

Explication about the Delta process in SAP BI - ROCANCEL and 0RECORDMODE

Hello,
I use the delta process with cockpit datasources (2LIS_17_I3HDR and 2LIS_17_I0NOTIF).
I have transfered all data from the extraction queue to the BW queue.
After, when I will launch the delta process in SAP BI (with the infopackage), two ODS will be updated. I wanted to know how SAP will know what is really the delta? I have seen that there is a ROCANCEL field in the PSA, how does SAP choose the good row? Does-it recognize the ROCANCEL and so replace the row ROCANCELED with the new one? Have we to do a special manipulation (like a mapping of ROCANCEL with 0RECORDMODE?)?
Can you explain me a little how does SAP work (ROCANCEL values, 0RECORDMODE, etc. and what I have to do? ).
Thanks a lot,
Regards,
Julien

Check :
Re: Indicator: Cancel Data Record
Re: 0RECORDMODE, 0STORNO, ROCANCEL

Regarding the Delta Logic in the Report

Hi Abap gurus,
i have selection screen for 3 fields in one block called material, plant and extract date. if the user selects the extract date as todays date then data has to fetch the as per todays date.
i have two radio buttons on the selection screen for the second block. one is change material and second is all materials.
if user clicks on first radio button then only change material and aslo newly posted records for that date has to come.
how to build the logic for this? i have developed upto first part. data is coming fine. how to build the delta logic? i am working for the site receipts. guide me in this issue. if possible post the code.

Hi,
[here you find lots of sample reports, |http://help.sap.com/abapdocu_702/en/index.htm]
Hope it solves your question.
Regards,
Clemens

How can I calculate the delta between 2 cursors on an xy graph

I have an xy graph with two sets of cursors: cursor0 and cursor1. I want to calculate the delta between cursor0 y position and cursor1 y position. I have created a cursor y position property node that gives me the y position of cursor1, but how do I get the y position for cursor0? There does does not seem to be any mechanism for selecting which cursor the property node references.
Thanks
John

There is a more rapid solution : you can read all the cursors attributes in a single property node call, then extract the info you need, as shown in the attached picture.
Message Edité par chilly charly le 08-29-2005 09:24 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_BD.png ‏2 KB

If the delta is break in my R3 production system.

Similar Messages

Maybe you are looking for