If the folio overlays are created in CS5.5, will they need to be recreated when opening and saving it in CS6?
Hi,
Do the folio overlays created using CS5.5 need to be created again when changing the file to a CS6 version? For example, a scrollable frame is created in the Indesign file/folio while using Indesign CS5.5. Then later, the file is opened and saved again after CS6 is now being used—it's saved for CS6, no longer 5.5. V27 is being used for DPS. Thanks.
No.
Neil
Similar Messages
-
after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?
Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files
(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
DanaThere's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.View menu ==> sort events
LN -
I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?
There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb -
I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time . -
which is the best app to create cartoon images on that I can move around to other apps and animate. I want to create the image only, no background or anything
Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini -
Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
AndyHi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure: -
Once photostream pictures are downloaded onto my mac will they stay in iPhoto forever after i have deleted them off of my phone?
When I synced my iPhone I my Mac , it automatically created a file called photo stream and imported all photos from phone into that file on my Mac.
Do you mean the "Photo Stream" album in the "Web" section of iPhoto? Like shown here?
If that is the only place where you are seeing your photos, in "my Photo Stream" in the "Web" section of Photo, then you need to copy these photos to an event to import them into the library.
The Photo Stream album is only showing you what currently can be imported from iCloud, and the photos will vanish after a month, so you are having a limited time to grab them.
If you have enabled "Automatic Import" in iPhoto's Photo Stream Preferences, it should already have created an event "July Photo Stream" and other monthly events with the photos from the streams. What find in these monthly events has been savely imported.
Regards
Léonie -
Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to open Photoshop unless I sign up/pay. I'm quite confused? I really NEED to have access to Photoshop ASAP.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
== Issue
==
Firefox is crashing or closing unexpectedly
== Description
==
Firefox 3.6.3 crashes when opening and the Crash Report [[@ strlen nspr4.dll@0x15f9f ]. It was working perfectly fine and the last three days, I am having difficulty in opening firefox. It crashes with the above crash report every time I open. I came across the bad image error and did a clean reinstall multiple times and that did not help. I have firebug and firecookies as an addon.
== Crash ID(s)
==
bp-5972b384-791f-4667-b3cb-051812100504
== Firefox version
==
3.6
== Operating system
==
windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5
== Plugins installed
==
firebug and firecookieUsually doesn't immediately crash, although that happens also. Usually hangs, then crashes.
Addons are WHY I use Firefox when it works. I am NOT on the bleeding edge any longer. I could go back to boring, boring, Chrome. -
How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.
Ernst ~ Welcome to the Support Communities. See this post:
Editing my iWeb page from another computer -
If I uninstall/reinstall PP pro cs5.03, will I need to reactivate it?
My PP is having a problem (see my other post) and Ive got to the point where a reinstall is my only hope of a cure, Will I need to reactivate it when I reinstall? not a prob if I do, but the workstation does not have a net connection at the moment and will involve moving it to an access point to activate - which is a bit of a faff.
Im on version 5.03 CS5
ThanksREinstalling does not affect existing activations, but sßpecific circumstances may still trigger a validation check and require an online connection. You won't know until you try.
Mylenium -
When I turn camera roll backup to OFF, and those same photos are on my other devices, will they remain on them? I know they will not be on icloud storage,
but will I still have them on my devices?Deleting the icloud backup totally is pretty scary. If my phone accidentally went swimming, I wouldn't be able to restore all the data with icloud. I was trying to find a way to delete only old backups (which you say do not exist), or if I could just delete the photos from the backup. I guess I could delete the icloud backup, switch off the camera roll from backing up, and then do an immediate backup of everything else. What do you think?
I am not a good apple person.
Thanks for your help. -
Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...You may be mixing up two entirely different Adobe products.
1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.
Maybe you are looking for
-
Ex_me_process_req_cust~process_header: How to Get Acct Assignment Data
I've created a custom class to use this BADI interface. Inside this process_header method I get the Purchase Requisition's item data, I now need to read the Purchase Requisition's account data, particularly the GL Account Number, and then change it.
-
Payments without result on known account.
Monthly we receive the message from our bank about a write down the amount of € 9.67 from our Credit card However we cannot find anything in our account data with you and have never been able to make use of our subscription. We posted an e-mail wi
-
Blocking of Multiple SAPScript print outputs
Dear All, Is there a way where we can stop users from printing a SAPScript Output,if its already printed once... Regards, srini
-
I've searched Discussions and could not find anyone with a similar problem that was resolved so I'm starting this post. I've tried downloading iMovie HD 6 (v 6.0.4) and I get the error message "iMovie HD cannot be installed on this system. Please ins
-
Hi, for some reason, i have created many frames but this particular one displays the title (information) puts a jbutton next to it and then 2 more underneath and 2 more under that. I wanted it sort of list form where title appears at top then 2 next