If the front end on my 6111 was 'knocked-out'..

if the front end on my 6111 was 'knocked-out'... would the MAX device test report an error

If you are talking about, right clicking on the input channel and bringing up "test panel" it would show an error only if the "Knock-out" caused the input values to be out of range. Other wise you would would see some wrong value displayed.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Workflows not shown in the front end but exists in LDAP

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

Unable to view FF reports in the front-end of FF 5.2 tool

After installing the FF tool on Netweaver, I am unable to see the reports from the back-end (R/3) system. The R/3 system has the FF 5.2 RTA installed and a user Id defined to connect to front-end of FF 5.2.
I configured the FF 5.2 connector, but still am unable to view reports from the front-end.
any suggestions would be helpful.
Thanks,
Kapil

I was able to resolve the issue by maintaining the gateway in the SAP adapter and running the transaction /VIRSA/ZRTCNFG on the abap side
thanks for the suggestions
Kapil

To avoid writing database code in the front end

Hello,
I am working on a database application using 10g database as backend and dotnet as front end. I wish to execute only oracle stored procedure for all the select (to avoid hard parse and use of bind variable), DDL and DML operations; just to avoid writing database code in the front end. Can anyone please give me a little examples of :
1.Select query's output to be return as resultset by stored procedure.
2.DML example by stored procedure.
3.Any DDL example by stored procedure.
using scott.emp, so that i would just call the stored procedure, rather than giving select,DML and/or DDL commands in the front end. Even though i have read in the documentation, but a clear cut examples will help me to get into clear concept as well.
Thanks & Regards
Girish Sharma

Hi...
-->Select example
create or replace procedure get_emp(rc out sys_refcursor)
is
begin
open rc for select * from emp;
end;
-->DML example
create or replace procedure do_dml_emp(pempid in number,
pempname varchar2,
result out number)
is
begin
insert into emp(empid,empname) values(pempid,pempname) returning empid into result;
exception
when others then
result:=-1;
end;
-->DDL example
create or replace procedure ddl_emp(colname varchar2,
coltype varchar2,
result out number)
is
begin
result:=-1;
execute immediate 'alter table emp add column ' || colname || ' ' || coltype ;
result:=1;
end;

Diagram Not getting displayed on the Front End UI in SSM 7.5

Hello ,
We are running SSM 7.5 SP 04. We uploaded a custom image using diagram manager for the required context in the administration UI. The image is uploaded successfully. But , when I open the strategy tab for my context in the front end UI , I am getting a "HTTP 500 Page cannot be displayed error".
I restarted the listeners and the JPIP sessions as well. But still the error persists. Please advise.
Thanks and Regards
Vijay

Vijay,
It is possible to successfully upload a strategy map into Diagram Manager and still not see it in the User Interface. After loading the goal diagram has to be Published To Server. You do that in Diagram Manager.
You can upload a strategy map and Save that in Strategy Default in Administrator Interface, but unless you Publish it, it will not be exposed to the end users.
In the Set Strategy Defaults area of the Administrator Interface, in the Create or Edit Goal Diagrams section. The Goal Diagram you loaded should have a Publish Date next to it. If it says Not Published, you need to Edit that Goal Diagram in Diagram Manager,
In Diagram Manager under FILE at the top, choose Publish to Server.
You now should see a Publish Date in the Administrator interface and Saving it will now make it available on the user side.
Regards,
Bob

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

Crystal Report not running from Addon in the Front End.

Dear All ,
There is a Crystal report , .rpt File inbuilt in the Add-on .
This report runs well from the Source Code .
But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
Suggest what to do ?
Thanks
Ashish

Dear Rahul ,
In my system , there is a Addon , which has some crystal Report file inbuilt .
Which run on the Button Click event in the Form at the Front End (SAP GUI).
When we debug the Source Code and pass the event . . Report Open with no hurdle.
But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
Thanks
Ashish

How do I create data-driven linkbuttons whose visibility is controlled from the front end?

I've made a component based on a mx:TitleWindow that contains linkbuttons that I'm using as a context-menu.
The TitleWindow component contains link buttons like this:
[Bindable]
private var _showEmailThis:Boolean = false;
[Bindable]
private var _showApproveThis:Boolean = false;
[Bindable]
private var _showReviewThis:Boolean = false;
<mx:LinkButton id="lnkEmailThis"
               visible="{_showEmailThis}"
               includeInLayout="{_showEmailThis}"
               click="lnkEmailThis_click()"
               label="Email this!" />
<mx:LinkButton id="lnkApproveThis"
               visible="{_showApproveThis}"
               includeInLayout="{_showApproveThis}"
               click="lnkApproveThis_click()"
               label="Approve this!" />
<mx:LinkButton id="lnkReviewThis"
               visible="{_showReviewThis}"
               includeInLayout="{_showReviewThis}"
               click="lnkReviewThis_click()"
               label="Review this!" />
This component contains a large number of links and is re-used by multiple modules in the same application.
Within each module, this component is used when a user clicks on a row in a datagrid.
The code looks like this:
In "Requests" module:
private function dgRequests_click(event:MouseEvent):void
    menu.showApproveThis = true;
    menu.showReviewThis = true;
In "Performance" module:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
    menu.showReviewThis = true;
As you can see, the visibility of individual linkbuttons is controlled within each module by setting boolean properties.
If I alter this component to use a renderer, how can I control the visibility of the linkbuttons from the code in each module (there are over a hundred links with different functionality - not every link will be used in each module)? Note: it is not known from the back-end which grid within which module uses which link. This is set in the front end within each module's actionscript file.
e.g., if the XML looks like this:
<links>
   <link>
      <label>Email This</label>
      <visible>_showEmailThis</visible>
   </link>
   <link>
      <label>Approve This</label>
      <visible>_showApproveThis</visible>
   </link>
   <link>
      <label>Review This</label>
      <visible>_showReviewThis</visible>
   </link>
</links>
and I set the Email link to show in the module like this:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
How do I make it take effect? Is there a way to control the visibility of a linkbutton within an item renderer in a component from the module that uses that component? Is there something like reflection in the Flex framework?

Put a single frame sequence structure around your stop button and then wire from the error cluster going into the error handler to the edge of the sequence structure. Now your code will stop at the end of the current iteration. To see why this works, watch you code execute with execution highlighting turned on and review the section of the manual talking about "Dataflow".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

HT1657 I tried downloading a movie, at the very end it said there was a problem. Now it's not on my laptop but if I go to download it again it asks me if I want to rent again? How do I get a credit?

I tried downloading a movie, at the very end it said there was a problem. No explanation, now it's not in my itunes library and when I try to download again it tells me I have already rented this movie do I want to rent again? I don't want to pay for it a second time, how do I receive a credit?

If it's not in the Movies part of your library, then does the Store > Check For Available Downloads menu option download it ? If not then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Urgent!!Error in the front end when trying to view a report

Hi All,
I am getting this error when I am trying to view a report in the front-end.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Please let me know if you have any ideas.
Thanks.
Vinay Sai Konduru

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

Hide "ORACLE FUSION MIDDLEWARE" message in the front-end

Hi ,
I want to hide the "ORACLE FUSION MIDDLEWARE" message in the front-end forms layout.
Please let me know which file I need to make change in the back-end and do I need to do any-thing from oracle admin also (any deployment or any check).
Thanks & Regards,
Harish

After making some changes in my HTML page the layout is coming properly

Updated attribute not showing up in the Front End

Hi,
I have to update an attribute column based on some conditions.
Even though I have updated, the updated value is not showing up in the front end
Moreover if I go to Diagnostics-> Examine and then query the attribute value I can see the updated Result
What can be the reason...
Please Advise
Rahul

Sounds like the Statement is not committed. Maybe you should add a
COMMIT;
at the end of your query.

How to place an image in database and how to retrieve and display it in the front end

how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.

Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column.

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

To change the layout of the front end

I am working in c projects it is a web enabled server at the front end and at the back end it is sap
I have to make changes in front end to add two i/p fields and backend it should update the sap table
Please help
Regards
Abhijit Chitre

Hi,
Welcome to SDN.
Could you give us information about the web application on the front end, is it using BSP ?
It sounds like you want to modify the standard, is that OK for you ?
Have you already located the BSP application (if any) in charge of the processing ?
Best regards,
Guillaume

If the front end on my 6111 was 'knocked-out'..

Similar Messages

Maybe you are looking for