If the iPhone 3G is the same size as the iPhone 3G-S....

If the iPhone 3G-S is the same size as the iPhone 3G; can I use the same Incase Slider Case or do I have to buy a new case?

The size of the iPhone 3GS is identical to the iPhone 3G.
If you check the size and weight for both via this link, they are identical except for the weight. The weight of the iPhone 3GS is slightly more than the iPhone 3G.
http://www.apple.com/iphone/specs.html
Message was edited by: Allan Sampson

Similar Messages

Lightning to 30 pin adapter with a lightning end is the same size as the cable that comes with the phone?

Has anyone found a lightning to 30 pin adapter where the lightning end is the same size as the cable that comes with the phone? I know there have been some non-apple versions, but I can't tell if they are the same as the Apple versions where the lightnin end is slightly bigger than the cabe that ships with the phone. Most iPhone bumpers only accomodate the original charing cabe ad the adapter cable is just slighter bigger and doesnt fit. Also, i'm not referring to the square, cable-less adapter.

Depending on your caes I shaped mine carefully with a craft knife seems all the case manufacturers designed the cases for lightning cables but seemed blind to the adapter and it's likely use
Have you not seen the Apple adapter with .2m cable between the plugs
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3a
will do what you want ,I use one in exactly same scenario

Is the lightening port on a macbook air the same size as the pro?

Easy question
Is the lightening port on the macbook air the same size as the Macbook pro?

thank you very much
yes, I meant the thunderbolt port
I just need to order an HDMI adapter cable, and ebay only lists Macbook Pro choices.
I appreciate your quick response
BV

Creating PDF the same size as the original

I have a TIF created in Photoshop CS2 and I'm trying to create a PDF that's the same size as the original (3 x 2 inches). What is the secret? I'm pretty sure I've done this before, but I can't figure out what to select for Paper Size to make this happen. Thanks for the help!

Try opening the TIF file in Acrobat directly. I just opened a TIFF file and it came out 2.74 X 1.00. IrfanView says the TIFF is 2.7 X 0.4. It looks like the opening added a bit of height to the file, but the right idea.

My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. Help please.

My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?

If you recently installed new ram, make sure it is seated properly.
If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in.

Making A Row Of Thumbnails The Same Size As The Screen Monitor No Matter What Montior You Use

I am making a website and am trying to get the row of thumbnails/cells (which contain 5 thumbnails across each set in a cell) to be the same length as the screen monitor so that you do not have to scroll horizontally across to see more cells/thumbnails in the table.
Here is the thing. When I first started making tables, I was making actual pixels to fit MY screen size, but then I found when I looked at the website on another computer the tables came out different sizes (because of different size monitors I assume). So, I changed the tables from pixels to 100% and that seemed to do the trick. Whatever computer I pulled the website up on, the tables extend perfectly across the monitor screen to its fullest extent and without having to scroll horizontally.
The next part of the website involved adding thumbnails of images. So I made a table 6 rows across by 5 columns down. And I put a thumbnail in each cell, so that 5 thumbnails went across the row. I also set the table width to 100% just like I previously did for my heading table. When I tested it on a laptop computer it seemed perfectly fine and the 5 cells in the row extended across exactly to the length of the monitor. But, then when I opened it up on a desktop computer, I had a problem. What you see is 4 of the columns on the monitor and then the fifth column is further to the right off the screen, which makes you have to move a horizontal scroll bar to see the fifth column. This table is also not flush with the heading table either obviously, although I have both set to 100%.
I don't know if my problem has to do with the table I made or the image sizes in Photoshop. In photoshop after I had scanned the image I went to "Image Size" and reduced the "document size" width to 1.5 cm to make the image come out a lot smaller. Should I be doing something different in Photoshop when changing the "Image Size"? Maybe saving it as a different measurement (choices are percent, inches, cm, mm, points, picas, columns)? Or, do I need to change something with my table/cells?
Anyone know?
Thanks.
P.S. I will post this in Dreamweaver and Photoshop, to get a little more help.

If I have to accept the fact that this table I made can't fit each person's monitor screen, then ok, but at least have it to where all the tables are flush with each other. If you take a look at the website URL I posted, every table I made for this page is set to 100%. No matter what computer I pull up the webpage, the heading tables and bottom copyright table come out to 100% of the screen size like it should. It is the tables I have for the pictures that extend pass this and make a horizontal scroll bar necessary and are thus not flush with the other tables. And,I figured out why. When I resized my images in Photoshop, I set the width of each thumbnail to 177 px. I also have 30 px padding on both the left and the right side of each cell (60 px total). So, calculating this we have: (177 px x 5 images across = 885 px) + (60 px padding x 5 cells across = 300 px) = 1185 px....an EXACT amount (which is MORE than my screen width) and OVERRIDES the 100% I set for the table. Therein lies the problem.
So, what I need to figure out is how to make either the cells or images adjust accordingly to fit the actual width of the monitor; 5 cells across = 20% each cell = 100% grand total across.
Follow me so far?
I know there has to be a way. I've seen other pages that can do it. I will keep trying and eventually figure it out.
Thanks for the help.
From http://www.awdsf.com/courseware/html/html2_tables.htm:
" A website that requires side scrolling is considered very un-professional."
And I couldn't agree more with this statement.

I moved my entire iPhoto Library to an external hard drive, which seems to have worked. But now my Mac Pro shows a backup of the same size in the storage info and has not freed up any space. help!

I moved my entire Iphoto Library from my Macbook Pro to an external hard drive. (Prior to this, I also copied the entire library to a different ehd, plus I have 2 other ehdrives with backups). I was trying to get more space on my hd. It has a capacity of 500GB, but was down to 70GB usable, with about 300GB used up by photos. I moved the library by going to Finder, using Command+Drag+Drop onto the new Seagate ext hard drive icon. The move seems to have worked, as the library shows up on the ehd, plus will open from there. My problem is that now my Macbook Pro shows that I STILL have only 70GB available out of the 500, and that 300GB is used up by "Backups", which it did not indicate before.
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
Thanks for any and all help!

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

How Can I replace an image and save the same size as the previous?

I want to replace an image in a PDF, but I would like to keep the same size, and location as the previous. I have tried to to it, but the new image takes a different size.
This is a PDF exported from an InDesign template.

Thank you.
The problem is that the person to edit the PDF doesn´t have ID and doesn't know how to use it.
The idea is that the design department create very sharp ID templates for people from other departments of the company only have to replace information (text and image).
We are looking for a program to edit PDF files and function as templates forreplacement information.

Is the original iPad wi fi the same size as the 3G model?

I'm finding conflicting information on this ... A case I just ordered said it was for the iPad 3g and I have the wi fi model.

I had one of each and they are exactly the same size.

Same size for the scheduling report

for the schedululing report, if i create my report with any size it is displaying me with same size 7(when we delivr rport th users email's). can you please help me how can i change my scheduling reports size(data size)

Hi User,
if i create my report with any size it is displaying me with same sizeDownload the report to Excel and check the size !
how can i change my scheduling reports size(data size)Get the huge data into report and schedule it then check the size of your report
Thanks,
Saichand.v

Acrobat 9 Pro - How do I get inserted scanned pages to display the same size as the original file?

When I insert scanned pages into Acrobat 9 Pro document, the scanned pages display much larger than the original file. They are all 8.5 x 11, but the inserted pages look HUGE compared to the original pages. HELP!

Check the resolution of your scanned files compared to the PDF. A 300dpi file placed into a 72dpi will appear larger.
-S

Force the Summary Sub totals on same page as the Repeating Group

Hello folks,
I have a Group by Left Report where I am showing Patients and the Visits that they have taken for each Department.
I am then doing a Sub Total of the number of Visits the Patient has taken. I would like to make sure that the sub total shows
up on the same page as the data in the Repeating Group. I tried using an Anchor but the Report does not like it.
It gives an Error: REP 1213 - Field references column at a frequency below its group when I anchor from Repeating frame to the sub total footer
and REP 1814 Report cannot be formatted. Object 'Horizontally' can never fit within 'M_1' when I try to anchor the other way.
My goal is to show the Sub Totals (Total) on the same page as the Patient and not go to the next page. I have enclosed the single dashed line and the Total (Label and field) in a Frame.
Output of Report:
Patient ID     Patient Name              Department              Visit
======================================================================
1001           Mary Poppins              Department 001              3
                                         Department 002              4
                                         Department 003              1
                                         Total                       8
1002           Peter Pan                 Department 001              2
                                         Department 002              1
                                         Department 003              2
                                         Total                       5
                                         -----------------------------Thanks in advance!

Pls set the property(page protect of the frame containing both sub total and patient details) to yes.

I lost my bookmark list where the dropdown doesnt work. Same goes for the webpage address tab where it just does not save. When I try to bookmark a new page after clicking "Bookmark this page", there was no response too. Can someone please help me???

It was still functioning last night and before I close the firefox window, the problem started. The problem persist until now.
1. Bookmark - tried to check the "help" list for lost bookmark but none of them seems to suit the problem i'm facing. The menu tab is there, but when i click on "Bookmarks", my previous bookmark list is not there. When I try to bookmark a new page, there is no window popping up (usually there is a small window pop-up to ask for the label of the website to be bookmarked).
2. The website address tab - usually we have a list of website that we usually visit so we just need to click on the arrow and click on the webpage that we want to visit. But now, I have to type the website address every single time. There is no drop down when i click on the arrow.
Can someone tell me what is wrong with it and please help me to solve this problem. THANK YOU VERY MUCH!!!

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Are the mini display ports the same size on the macbook 2010 as the macbook pro?

i am trying to hook up my macbook to my hdtv ive found some cables on ebay but there all for macbook pro? will it fit the macbook ?also i think im going to have a problem with the sound any ideas any1 ? there is an input and out put option on sound prefrences no option for mini display sound output ? maybe i need to buy the cable first and when i plug it in it will give me that option?

Your MacBook has the Mini Display port. MacBook Pro's after 2009 have same. Earlier MacBook Pro have the full size DVI port.
If the cable is full size DVI you would need a Mini Display Port to DVI adaptor

How to make the buttons same size on the toolbar

Hi All,
Can anyone please tell me how to make the size of buttons on the toolbar to be same .
And i also want to add combo box at the right side of my menubar with prefered size.
Please send me the solution if anyone knows . Thanks in advance.
Regards,
Shankar.

how to make the size of buttons on the toolbar to be same Create a panel with a GridLayout. Add the buttons to the panel then add the panel to the menubar.
add combo box at the right side of my menubar Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]How to Use Menu Bars for an example.

If the iPhone 3G is the same size as the iPhone 3G-S....

Similar Messages

Maybe you are looking for