If the power button on the top of the phone stops working and sounds loose is that covered and can be fixed/replaced?

If the power button on the top of the phone stops working and it sounds loose is that covered and can be fixed/replaced?

Fix an appointment at the Genius bar for evaluation and possible replacement.

Similar Messages

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in.

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in to Apple.

First things first:
Update your profile (equipent, OSX, etc)
In Lion MS office2004 is not compatible, are you stIll using it?
Do the SMC RESET and do the PRAM reset.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

My Pavilion a6417c The 'power button' light never illuminates. The fans all run at full.

My Pavilion a6417c the 'power button' light never illuminates. The fans all run at full. The only way to turn it off, is to unplug the Power Cable from the PSU. The system does not boot. If the PC is unplug for more than a week, it will boot. But after 5 minutes it will turn off.
Eugenio

Try a SMC reset:
http://support.apple.com/kb/ht3964
What does it show in System Profiler (Information)>Hardware >Power>Battery:
This is from mine.
Ciao

I am having a recurring problem with my screen suddenly enlarging to the point where I cannot use it! The power button is also unresponsive. When it does work and the screen is large, I cannot access the slide at the top.....

I am having a recurring proble with my screen suddenly enalrging to the point where it is unusable. The power button is also not working. When I try to shut off the phone to restart it, I cannot swipe across the top to power off vbecause the screen is so big and unresponsive. Can someone help me with this problem?

Double tap the screen with three fingers to switch off zoom, then go to setting and disable it to make sure you don't switch it on again by accident.
http://support.apple.com/manuals/

The power button will not turn on the computer.

My Mac book pro screen is black and the power button will not start the computer.

Try checking thru here.
http://support.apple.com/kb/TS1367

My iMac goes into sleep mode, won't come out until I unplug and replug the computer then hit the power button. Just hitting the power button alone won't restart the iMac.

My Imac goes into sleep mode but won't come out. The keyboard/mouse won't rouse it and the power button won't do it either. I have to unplug the computer, re-plug it in and then hit the power button. Help?

I looked around the internet and found an old post that seems to have solved the problem. I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared. I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

My iphone 4s shuts off automatically, and i can't turn it on with just the power button i need to do the "reset" all the time. it's been happening since sunday and today is already tuesday. what is happening?

OS - 6.1.3
After it turns off it gets put into " recovery mode". and even if i do the "restart", i have to do it several times before the phone actually turns on. phone is 1 year and 5 mos old. already tried to restore it but it just keeps on shutting down. can anybody help?

Hi, thank you very much for your reply. No my phone was never been jailbreak-ed. Never been dropped in water or in any wet surface. Dropped on the floor while texting yes, but it was just a one time incident, last year august i can clearly remember, but after that no more (phone still works fine even after.) restored the phone again earlier, but problem still occured. Will try to go to Apple also to ask and have it checked. Just worried because my phone is already out of warranty. Will keep you posted. Again, thanks. If you have any more advice just let me know. It would mean a lot.
Cheers,
N

The home button on my ipod 5th gen has stopped working comletely.

I have had my 5th gen ipod touch for almost a year now. I never drop it. i take good care for it. its a 64 GB one so it was heaps of money. LIke 90% of my life is on that thing. Should i ask for a replacemeant or is it possible for it to be fixed? I only have 3 weeks of the warnity left.
IM freakin out help please

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My iphone constantly freezes up. Pressing the power button gets to an application but cannot get to another application-any ideas?

My iphone constantly freezes up. Pressing the power button usually gets me to the last application used but does not allow me to change applications.
Ant ideas?

Try resetting it. Hold down the on/off button at the top right and the home botton at the bottom at the same time for abour 5-15 seconds. This will not affect your data. The cycle the iPhone back on. That should clear up the problem

P35 Platinum: I have to press the power button multiple times to start

Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?

Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro

How can i restart my phone if the power button is not working?

My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
Also, I use the on-screen assistance icon but it does not have a power off option.

demeece wrote:
My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
Also, I use the on-screen assistance icon but it does not have a power off option.
That's correct. Because how would you turn it back on again if the screen was off and your power button was on the screen?
Yo need to fix the button, or try letting the iPhone die out completely, then connect it to power and after it's charged for a while, see what happens when you press the Home button.

My MacBook Pro Early 2008 freezes up with Kernel Panic, i restarting by pressing the power button for about 8 to 10 seconds, but nothing happen and still getting kernel panic 9c2028 10.5.2 Darwin 9.2.1 Anybody please help me get out this panic.

I am writting to ask for help with my old version MacBook Pro early 2008 with Kernel Panic 9C2028 10.5.2 Darwin 9.2.1. My MacBook Pro freezes up with a panic and have to shut it down by pressing and holding the power button. When I restard the comp it keep showing the same Kernel Panic. Will any body outthere heppe me get out this freezes up panic kernel Darwin 9.2.1.
Thanks You

Looks like a RAM failure or maybe another hardware failure.
Can you take out the battery and with the charger connected start up? Same failure?
Have you tried the SMC reset and PRAM reset? do both twice.

Why does Satellite Pro A300 not start when the power button is pressed?

Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?

When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300.

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac

If the power button on the top of the phone stops working and sounds loose is that covered and can be fixed/replaced?

Similar Messages

Maybe you are looking for