If the request was canceled due me money

If the request was canceled due me money ?

MR.Qais wrote:
i order from apple
You would have received conformation of your order and any Contact Details will be in that.
As stated... this is a user to User Technical Support Forum provided by Apple.

Similar Messages

An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

hi i am getting this error.
An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
please do the nedful.

yeah Ted Ueda,
what you are saying is correct. i am getting this output for
report.getProgID() is CrystalEnterprise.Report.
can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
please let me know which is best book for beginers.
Thanks & Regards,
Purushotham Podaralla

TFS Integration Platform Error while Syncing - Caught and converted, The request was aborted: The request was canceled

Hello,
We are doing a 2-way version control sync between TFS 2013 servers.
TFS A - Project A is getting synched with TFS B - Project A.
TFS A - Project A has got all the code and files, whereas TFS B - Project A is empty.
Previously we have synced TFS 2013 projects across servers with out any error or issues. Today we came across an issue (check log at end of post) and hope Microsoft can
provide some guidance on this. Following is the problem we are facing today:
We have configured the TFS Integration platform tool for VC - 2 way sync and started the migration. Current
status is that the discovery, analysis is complete and migration is half way when I started to get such errors
(check log at end of post) .
Note that the migration has not stopped...
After doing some research and googling I understand that the reason for this error is that by default if
an individual file transfer cannot complete 16MB in 5 minutes, the operation will fail. And the solution to this is to modify
chunk size in the file of "TfsMigrationShell.exe.config". I have few questions regarding this...
Question 1:Is
above understanding and solution correct? I also notice that this error appears for every huge file (approx >30MB), is there any timeout setting at the target server? Is this something to be changed at the Tool level config or the Target IIS level
config?
Question 2: Suppose
I do not change the config setting, then huge files are skipped due to this error. However, after the migration of the other files is finished, then, will the tool retry to sync the skipped (huge) files? Or has it skipped them forever?
Question 3:
Suppose I modify
chunk size in the file of "TfsMigrationShell.exe.config", then, which of the following do I need to do (give me the best solution among the 3 below)
a) Do I need
to restart the migration (by deleting and recreating the project on the 2nd TFS Server and re-starting migration)?
b) Do
I need to create a new configuration and restart migration?
c) Do I need to restart the sync service?
The concern here is that we have got 3 more jobs (TFS
Integration tool configurations) running parallelly that
is syncing Work Items & VC of other TFS projects and want to make sure that restarting the TFS Integration Job Service will not have any negative impact on the other jobs as well as no negative impact on the current migration job...
Microsoft, Please advice. Thanks!
Log:
[1/21/2015 10:55:39 AM] AsyncUploadFileState.Completed -- caught and converted:
[1/21/2015 10:55:39 AM] Microsoft.TeamFoundation.VersionControl.Client.VersionControlException: C:\TfsIPData\10\ications\MDM Folder\Binaries\v9.5\DMS Web Service Release 1.5.zip: The request was aborted: The request was canceled. ---> System.Net.WebException: The request was aborted: The request was canceled. ---> System.IO.IOException: Cannot close stream until all bytes are written.
[1/21/2015 10:55:39 AM] at System.Net.ConnectStream.CloseInternal(Boolean internalCall, Boolean aborting)
[1/21/2015 10:55:39 AM] --- End of inner exception stack trace ---
[1/21/2015 10:55:39 AM] at System.Net.ConnectStream.CloseInternal(Boolean internalCall, Boolean aborting)
[1/21/2015 10:55:39 AM] at System.Net.ConnectStream.System.Net.ICloseEx.CloseEx(CloseExState closeState)
[1/21/2015 10:55:39 AM] at System.Net.ConnectStream.Dispose(Boolean disposing)
[1/21/2015 10:55:39 AM] at System.IO.Stream.Close()
[1/21/2015 10:55:39 AM] at System.IO.Stream.Dispose()
[1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.FileUploader.UploadChunk(FileStream fileContentStream, Int64 end)
[1/21/2015 10:55:39 AM] --- End of inner exception stack trace ---
[1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.Workspace.EndUploadFile(IAsyncResult asyncResult, PendingChange& pendingChange, Byte[]& uploadedContentBaselineFileGuid, Int64& uncompressedLength)
[1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.Workspace.AsyncUploadFileState.Completed(IAsyncResult asyncResult)

Hi Charles,
I have been doing in depth research and testing of this and here are my findings:
Replies to your points:
1) It failed with UploadChunkSize value change. Tried 1MB, 500KB, even 100KB. Fails with same error! Is there any other setting we can change for the timeouts at the target TFS server also?
2) The huge files are not skipped. The migration loops on the failed files and doesn't continue to process the next lot of files. So the migration is blocked on the huge files.
3) OK. Thanks.
Please see below the finding on when migration succeeds and when it fails:-
Scenario 1:
a) Where Migration fails:
TFS A is in India and TFS B is in UK. Both TFS are on different domain. Migration tool is installed on same machine as TFS A. There is a firewall that allows the access from TFS A machine to TFS B machine. The migration tool fails to work in this scenario
when it encounters a file size approx > 8MB. I tried setting the UploadChunkSize value to 100KB. Yet it failed!
b) Where Migration works:
However, if the files are approx less than 3MB then the migration works without any errors.
Scenario 2 where TFS migration tool works:
TFS A is in India and TFS B is also in India (located closeby). Both TFS are on different domain. Migration tool is installed on same machine as TFS A. There is no firewall in this case. No changes were made to UploadChunkSize value and files with size
of 10's and 100's of MBs got synced without any issue.
Questions
Question 1: Can we conclude now that there is some issue with the firewall or network in case of scenario 1? As mentioned above Scenario 1 works if file size is less then approx 3MB.
Question 2: Is there any timeout setting on the Target TFS server which can be set so that it waits for the file without timing out?
Thanks for any help...

The request was aborted: The request was canceled.

I am trying to upload some files through c# on Azure. But i am getting below error on a particular system.
The request was aborted: The request was canceled.
I ran fiddler and get the following response.
<?xml version="1.0" encoding="UTF-8"?><request protocol="3.0" version="1.3.23.0" ismachine="1" sessionid="{7D4FD5D2-27F8-45D9-9CB9-94995712087B}" installsource="core" testsource="auto"
requestid="{8D9DECDD-4920-4AE4-B5FD-B2D9DBC56329}"><os platform="win" version="6.1" sp="Service Pack 1" arch="x86"/><app appid="{22BC5D71-241A-4198-94D2-4A45297A4910}" version="1.3.23.0"
nextversion="" lang="" brand="GGLS" client="" installage="251"><updatecheck/><ping r="-1"/></app><app appid="{BD53C92C-0EDE-40B1-9E29-DA95D1F72764}" version="1.0.0.1"
nextversion="" lang="" brand="" client=""><updatecheck/><ping r="-1"/></app></request>
HTTP/1.1 504 Fiddler - Receive Failure
Date: Mon, 29 Dec 2014 14:13:49 GMT
Content-Type: text/html; charset=UTF-8
Connection: close
Cache-Control: no-cache, must-revalidate
Timestamp: 19:43:49.762
[Fiddler] ReadResponse() failed: The server did not return a complete response for this request. Server returned 0 bytes.
K K Sanghi

try
StorageCredentials sc = new StorageCredentials(storage, accessKey);
CloudStorageAccount storageAccount = new CloudStorageAccount(sc, true);
CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient();
CloudBlobContainer blobContainer = blobClient.GetContainerReference(container);
CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(targetFileName);
using (var fileStream = System.IO.File.OpenRead(localPathwithFileName))
blockBlob.UploadFromStream(fileStream);
catch (Exception ex)
throw ex;
K K Sanghi

Your request was cancelled. The necessary security privileges

I downloaded this example and ran it against the BusinessObjects server I got where
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/809d64c6-461c-2c10-f4bd-e499c25d6a38?quicklink=index&overridelayout=true
I tried to view a simple report and I got this message. This message appears with any of the reports ones that were already created or ones that we created. The user I am running on is a administrator and if I login to actual server through a web
browser the report works fine.
Your request was cancelled. The necessary security privileges could not be verified. Please contact your system administrator.
BusinessObjects Version XI 2.0
.Net Framework 4.0
Anyone have any ideas ?

1. try passing the non encoded token e.g. BOToken = enterpriseSession.getLogonTokenMgr().createLogonToken("", 120, 100);
2. try using getDefaultToken() and see if that works.
3. Have you tried usign openDocument.jsp instread?
4. are you redirecting to this url? 'http://[server]:8080/BOE/CrystalReports/viewrpt.cwr?id='repId'&apstoken=[token]';
Java uses double quote " rather than single quote ' for string declaration.

The call was cancelled by the caller before the remote party answered

Hi,
We have a Lync 2010 Enterprise deployment in a single site with 2 FE and Mediation Server collocated.
When dialling a number from a PSTN phone the call gets routed via our PBX/PBX Gateway/Mediation Server/FE Server to the desktop Lync client successfully.
As soon as the user answers the call with the Lync client the call 'hangs' and terminates without hearing anything on either side.
The snooper logs show:
Error:
SIP/2.0 487 Request Terminated
Partial Content:
User-Agent: UCCAPI/4.0.7577.4398 OC/4.0.7577.4398 (Microsoft Lync 2010)
Ms-client-diagnostics: 52092;reason="The call was cancelled by the caller before the remote party answered"
Content-Length: 0
Please help?
Vinkie

What kind of gateway are you using to connect to your PBX and how? What is your media set to? G.711 μ-law or a-law? I'd check media settings there as a starting point.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

Infoview: A request was cancelled

When I go into infoview and click on the actual name of the report, instead of clicking "schedule or history" I am prompted with the parameter dialog box right away. I notice there are only 2 parameter dialog boxes when there needs to be 7 parameter dialog boxes.
It appears that there is an older version of the report when you click on the actual name of the report in infoview. But if you go into history or click schedule and select the parameters it shows 7 parameters and that's correct.
When I click on the actual name of the report I go to the parameter screen and select from my two parameter dialog box and then proceed to run the report. After about five minutes of running the report comes back with this error message ...
CrystalReportViewer
A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
Unable to retrieve Object.
A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
We use CRXI R2 on our development machines to create reports.
Any thoughts on how to correct this problem?

The parameters in this report are connecting with a stored procedure via the Record Selection screen in Crystal Reports.
I went into CMC and changed the 7 parameters to "Prompt" and this fixed the problem of me not being able to see all 7 parameters before. So now all the parameters are visible when I click on the report name in infoview.
I also tried to run the report in infoview by clicking the report title as I did before and I choose my options for all of the 7 parameter dialog boxes and ran the report. The report takes about 2-3 minutes and comes back with the error....
CrystalReportViewer
A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
Unable to retrieve Object.
A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
I ran the crystal report on the server using CRXI R2 and it worked fine. So we know the report is functioning properly.
I almost think this is a security issue, do I need to restart a particular service on the server?

HT5678 When I try to update the OS I get an error message-- An error has occurred-The operation was cancelled.(3072)

Is there anything I can do to update my OS? I have the Mountain Lion and I keep getting them- The operation was cancelled.(3072)- when I try.

Often due to another User being logged in & having Safari open.
log out from any other users, or at least close any open applications there.

PLEASE HELP! Paypal Order Payment Stuck Because the Order Was Canceled but Not Captured

regarding order {removed per forum guidelines}
My Paypal order was canceled due to verification issue and my Paypal account was not charged. However, the
Paypal transaction has not yet been captured by Bestbuy and it remains "pending authorization"
My payment sent to Bestbuy's Paypal account has not been declined/rejected, so it is still pending in Paypal. Paypal cannot refund me until Bestbuy declines the paypal payment. The customer service reps do not understand this process and constantly feed me canned response about automated refunds. This type of refund is instant, and even my canceled transaction a few hours prior to this one was also refunded promptly.
I have been trying to resolve this issue all day and it keeps falling
on deaf ears. Please refer this message to someone who is
knowledgeable with Paypal refunds. I need to get the refund back today
to buy the item from Bestbuy.
Solved!
Go to Solution.

Hello kreyers2011,
I was very disappointed to read that you encountered this roadblock when ordering on BestBuy.com. Certainly this is not the experience that we wished you to have and I apologize for any inconvenience.
I have some information for you about your concerns, so please watch for a private message from me. To check your forum inbox, ensure that you have signed in with your user name and password, then click on the envelope icon in the upper right of this page.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Workflow Manager 1.0 (SharePoint 2013): The process was terminated due to an unhandled exception

I am seeing large numbers of the following errors appearing in the event log of the SharePoint 2013 application server hosting Workflow Manager 1.0:
Log Name: Application
Source: Application Error
Date: [Date/Time]
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: [Application Server]
Description:
Faulting application name: Microsoft.Workflow.ServiceHost.exe, version: 1.0.20922.0, time stamp: 0x505e1b24
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c Faulting process id: 0x691c Faulting application start time: 0x01cfc2776b3f0d74
Faulting application path: C:\Program Files\Workflow Manager\1.0\Workflow\Artifacts\Microsoft.Workflow.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: b8157bf8-2e6a-11e4-9413-00155d38891d Faulting package full name:
Faulting package-relative application ID: Event Xml:
Log Name: Application
Source: .NET Runtime
Date: [date/time]
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [same application server]
Description:
Application: Microsoft.Workflow.ServiceHost.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception
Info: Microsoft.Workflow.Common.FatalException Stack: at Microsoft.Workflow.Common.Fx+<>c__DisplayClass2.<failfast>b__0() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object,
Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
Event Xml:
Log Name: System
Source: Service Control Manager
Date: [date/time]
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [Same application server]
Description:
The Workflow Manager Backend service terminated unexpectedly. It has done this 895 time(s). The following corrective action will be taken in 30000 milliseconds: Restart the service.
Event Xml:
The SharePoint 2013 farm is updated through the September 2014 PU (KB2995902). Topology: 1 App, 2 WFEs. Workflow Manager 1.0 installed to the App server. Workflow Manager 1.0 cumulative updates one
and two have not been installed. The Service Bus Gateway and Service Bus Message Broker services are started. The Workflow Manager Backend service can be started, but then quickly stops.
Thoughts? Resolution? I would be grateful for any assistance.

Hi Stephan,
As I understand, you are encountering the issue that Workflow Manager Backend service terminating each time. May I know did you run the update cmdlets after you installed the updates for SharePoint server 2013? Please confirm it per the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
If you haven’t run the updates cmdlets, I suspect this is an install issue. I’d suggest you re-install workflow manager to resolve the issue:
1) Leave WFM/SB Farm
2) Uninstall updates and application in the following order and one at a time:
Service Bus CU1
Workflow Manager CU1
Service Bus 1.0
Workflow Manager 1.0
Workflow Manager Client 1.0
Microsoft Windows Fabric
3) Log into SQL server and delete Service Bus and Workflow Manager databases.
SBManagementDB
SBGatewayDB
SBMessageContainer01
WFManagementDB
WFInstanceManagementDB
WFResourceManagementDB
4) Install in the following order one at a time through Web Platforms Installer:
Workflow Manager 1.0
Service Bus 1.0 CU1
Workflow Manager 1.0 CU1
Regards,
Rebecca Tu
TechNet Community Support

SSAS 2012 Tabular Error: The operation was cancelled because of locking conflicts

I have a 800 mb SSAS database that I refresh(Process current day partition) every 30 minutes. As soon as the processing starts all my users get error The operation was cancelled because of locking conflicts. I ran the deadlocks trace as described in http://blogs.msdn.com/b/sql_pfe_blog/archive/2009/08/27/deadlock-troubleshooting-in-sql-server-analysis-services-ssas.aspx
but all I see is the processing start and all the users getting the error ("The operation was cancelled because of locking conflicts") 22 mil sec after the processing starts.
I also ran "select * from $system.discover_locks" but I only see lock types 2,4 and 8. None of which seem to be exclusive
This is SSAS 2012 with sp 1
Database Architect

Hi Derek,
According to your description, you get the dead lock error when processing partition. Right?
In Analysis Services, this error occurs when lock manager detects a dead lock. Lock type 2,4 and 8 can also have two transactions waiting each other and cause deadlock. In this scenario, please check the Dead Lock Graph in SQL Profiler
and find the related processes. Check what the processes work for to see if you need to do parallel processing or process other objects before partition processing.
Best Regards,
Simon Hou
TechNet Community Support

Navigation to the webpage was cancelled Error in Portal

Hi All,
I am getting error Navigation to the webpage was cancelled in SAP Portal when and select few of the
application like SRM Application , Some external HTMl application.
Bala

Hi ,
I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
i.e. from HTTPS to HTTP .
To resolve this issue you can you below options :
1. Change the IE setting which will allow the navigation from secure to non-secure environment.
2. Use same protocol either HTTP or HTTPS (Basis Team will help you in this )
3. Use correct SSL certificate (Basis Team will help you in this)
The First option is very easy , you just need to change the IE setting , Which is explained in
sapnote 0001427561
Regards,
Piyush

Navigation to the webpage was canceled

"Navigation to the webpage was canceled" I get this error when I try to login to System Monitoring/Administration
We have newly configured solman. Can anyone please hint at what the error could be?
Thanks
Prasad

The hosts file entry was not maintained!
The problem is resolved now, thanks

Crystal Reports PrintToPrinter - The process was terminated due to an unhandled exception

Hi,
I am having a real problem with Crystal Reports in an application built using Visual Studio 2013.
Sometimes (in fact nearly all the time, but not always) whenever I call PrintToPrinter, I get the following error:-
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 37A9D5DC
I have two projects that wrap the functionality, one a Windows Service and the other a Console application.
I will attach a sample of my code, but at the moment I am testing using the console application for testing and this error always terminates the application completely. I have added all sorts of exception handling to try and stop it terminating the app, but to deal with the exception gracefully. Nothing however works, it always terminates the application completely.
The strange thing is that this only happens when calling PrintToPrinter. If I use export functionality such as ExportToStream, everything is absolutely fine and I don't get any errors.
The application always works fine on my development machine as well printing to an Epson WF-3540, it just falls over when deployed to the live server.
The application is developed in Visual Studio 2013.
It uses .NET Framework 4.5.1.
The printer that we are printing to that causes the issue is an HP LaserJet P3010 Series PCL 6
All Crystal Reports For Visual Studio are patched to the latest versions on the live server (13.0.5.891)
I am at a complete loss and any help or guidance would be very much appreciated.
A sample of my code is attached
Many thanks in advance.
Simon

VS 2013 is not supported until SP 9 due out end of this month
Don

If the request was canceled due me money

Similar Messages

Maybe you are looking for