If the switch itself is hosting the DHCP pool, can the switch still be configured to send a copy of the request to ISE?

ip dhcp pool POOL52
network 10.10.52.0 255.255.255.0
domain-name didata.ise
dns-server 10.10.50.11 10.10.50.1
default-router 10.10.52.1
option 43 ascii 10.10.50.100
lease 7
Interface Vlan52
description EmployeeVLAN-52
ip address 10.10.52.1 255.255.255.0
ip helper-address 10.10.50.10
In this case above, 10.10.50.10 is the ISE server...

Yes you can do that. just add secondary DHCP as "ip helper-address "ISE IP Address" ".

Similar Messages

Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content. Can someone help?

Automatically Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content. Can someone help? The Apps seem to sync fine, just not the music, videos, podcasts, or audiobooks.

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

Sorry I'm so late responding; I've been away.
http://support.apple.com/kb/TS3694#error1611
The error means that your antivirus or firewall is blocking the update process.

HT1343 how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!

Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent

Just tried to sync my ipad with my macbook and the ipad seems to have frozen and i can't switch it off or open any app

just tried to sync my ipad with my macbook and the ipad seems to have frozen and i can't switch it off or open any app

Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

Hello:
I must apologize . I should have checked here first:
http://support.apple.com/kb/HT3669#HP
According to the list, there is no driver for your printer included in OS X 10.7.
There are a couple of options:
1. Contact HP to see if they have a workaround.
2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers. Generic printer drivers may not let you access all the features of your printer.
I have not tried #2, but some people have had success.
Barry

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

Abelynn-
Does the problem occur in both Camera and Photo Booth Apps? If you run the FaceTime App, does the front camera work?
If the front camera never works, you may have a defective iPad. If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
If the front camera works for at least one App, try rebooting the iPad. Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. After a couple of minutes, the iPad will restart. Rebooting will not hurt anything, and may correct your problem.
Fred

HT201412 my wifi switched itself off and i cant get it to switch back on. Any suggestions?

my wifi switched itself off and i cant get it to switch back on. Any suggestions?

Hi JoJo_85,
If you are unable to turn on Wifi or the setting is greyed out, you may find the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden

After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

How to add subject in the mail while choosing option i.e. "Send a copy of the entire PDF file as an

I need to update the subject in the mail while choosing option i.e. "Send a copy of the entire PDF file as an attachment"?
How I can add my own subject in the mail while attaching pdf file, currently it shows as "do" subject name which is default every time?

the normal FILE FTP adapter will do or do we have to use any special Adapter
File adapter with a bit of modification will do. See this
XI: Read data from PDF file in Sender Adapter
Once ur pdf is converted to xml, u can use the java or xsl mapping to map the comlpete xml structure into one field
The specified item was not found.
Regards,
Prateek

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

Drag the entire group into the To: field of a new message. The group is in your Address Book. You've used a name for it, like My Group. You can simply start typing "My Group" in that To: field and it should appear in a context menu.

I already have creative cloud Photography plan and just want to add dreamweaver, is this possible? Alternatively, I have tried purchasing the Complete - For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

I already have creative cloud Photography plan and just want to add dreamweaver, is this possible? Alternatively, I have tried purchasing the Complete — For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

yes.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

I have exactly the same problem here too. Followed all of the discussions and still unable to access programs

With the new Yosemite update (10.10.3) I can no longer transfer my photographs into Adobe Photoshop Elements by the previously expedient 'click and drag' method. Neither am I able to import or export them. Does anyone have suggestion on moving them?

With the new Yosemite update (10.10.3) I can no longer transfer my photographs into Adobe
Photoshop Elements by the previously expedient 'click and drag' method. Neither am I able to import or export them. Does anyone have a suggestion as to how to move pictures between the new Photos and Adobe Photoshop?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

If the switch itself is hosting the DHCP pool, can the switch still be configured to send a copy of the request to ISE?

Similar Messages

Maybe you are looking for