If the user passes show a button widget on results screen and if they fail show another
I am trying to set up a quiz so that on the results screen if the user passes one button shows and if they fail another button shows ... I have an advanced action that hides them initially On Enter when the results screen loads. For some reason it is not working ... any suggestions?
Will just add some links to blog posts that could help:
You own version of the results slide: http://blog.lilybiri.com/intermediate-score-slides
Shape buttons on question/score slide: http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
All about question/score slide: http://blog.lilybiri.com/question-question-slides-in-captivate
http://blog.lilybiri.com/question-question-slides-part-2
Lilybiri
Similar Messages
-
I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?
Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you! -
I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review
I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O. -
Each time I connect my iPad to computer, the pop up screen on the computer will show another name not my iPad name. The name shown on iTunes in device are is my iPad name. How would I rename it? Please help!
Gotcha, sorry, I'm guessing you are referring to Windows Autoplay. This should do it:
Type regedit into your search bar and bring up Registry editor. Go to the the very top with My Computer. Now go to Edit and Find. Type in the whole offending name that is bugging you, i.e. Soandso's iPhone and hit find. After it searches your registry and finds the first name select it and Edit the Name. I copy/pasted it for all the next steps. After you have found the first name don't stop there. Use F3 to find next Name in registry and So on and so fourth until you have replaced every offending name in your whole registry with the Name you want to show up i.e. Tom's iPhone or whatever? Repeat all of these steps if you have more than one name showing up in your devices? Worked 100% for me. Close regedit and reboot (very important for changes.) Plug your iPhone back in and enjoy all your names back to normal. -
I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see only my facetime in setting>noicifation center. and i tried to check at my contact i didnt see also facetime in lower part. please help me,. thank you
Hi LifeGood,
Thanks for using Apple Support Communities. In iOS, FaceTime is not a separate app and FaceTime calls can be made as described here:
iOS: Using FaceTime
http://support.apple.com/kb/ht4319
How do I make a FaceTime call?
You can make a FaceTime call in multiple ways, depending on your device:
iPhone 4 or later: You can place a FaceTime call using the following apps:
Phone: While on a phone call, you can tap the FaceTime icon to invite the other party to a FaceTime call.
Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
iPad 2 or later, iPad mini, iPod touch (4th generation) or later, and FaceTime for Mac: You can place a FaceTime call using the following apps:
FaceTime: Place a FaceTime call using your contacts list.
Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
Note: There is no FaceTime app on iPhone. Use the Phone app instead.
Cheers,
- Ari -
I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them down?
If you downloaded them on your computer's iTunes then they should have gone into the Movies part of your iTunes library, if on a device (iPad, iPhone or iPod Touch) then into the Videos app - they haven't appeared there ?
If you downloaded on your PC and they don't show in the Movies section then you could try searching for them by name (or part of their name) via windows explorer and see if that finds them. Or if you downloaded them on a device and they aren't in the Videos app then have you got a film age rating set in Settings > General > Restrictions that is hiding them, and if not can you find them via the device's spotlight search screen (swipe your first homescreen to the right) ? -
ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
Hello,
This will fix your problem!
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
That should get you back on your way.
~Lt. Leviathan -
I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?
ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1 -
How to create a button which unloads an iFrame and puts in its position another iFrame?
How to create a button which unloads an iFrame and puts in its position another iFrame?
It is very important for me if anyone could answer...
Thank you all in advance,
FrankOk I found it!!
-
I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?
Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
When I try to turn on my ipod the connect to itunes logo comes up on my screen and it won't let me do anything.
Restore it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Is it possible not to allow the user to select radio button based on condi
Hello All,
I have two radio buttons ( Relation value 1 default , famid value 0 )
can i create a situation where in the user cannnot select the famid radio based on some condition.
The conditioin is that , the user should have selected atleast one item from three list controls then only i should allow the user to select famid radio else not ?
thanks/kumarHi,
You can use javaScript to enable disable radio button. Call the javaScript from your select list onChange event.
Hope this helps,
Regards,
Tajuddin
web: http://tajuddin.whitepagesbd.com -
I would like for the users middle initial or middle name to show in outlook 2010. I
can set it in the header meaning I see the middle initial when the email comes in but its not in the signature. I read a post about the middle name attribute has to be set in a/d? if that is the case please provide some feed back on how to accomplish that?
server 2008, a/d 2008In AD, the attribute name is "middleName". You can populate it in bulk using Powershell with
Set-ADUser cmdlet.
For Exchange questions, I would recommend asking them here: http://social.technet.microsoft.com/Forums/exchange/en-us/home?category=exchangeserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
Insert a new value while the user clicks create insert button
Hi,
I am using jdev 11.1.5
I had created a HD and ln Eo's with corresponding Vo's
I had dragged and dropped as the master-detail relationship
I had dragged and dropped the create insert button
while i click the insert button
The last value must be added by 1 and it should be inserted in the new row
eg:
JlNo Type
1 CCCC
4 yyyyyIf the user clicks the create insert button it should insert 5(4+1) as the value in new row
can anyone help me..,Thank you jhon for your reply..,
I will suerly follow ur words if i m havin more than 1 user but in my project i m having only one user so that i think this would be the best one.,
could u pls tell me the solution for this..,
I had used this code in my EOImpl method
protected void doDML(int operation, TransactionEvent e) {
if(operation == DML_INSERT){
RowSet seqForThisEmp = (RowSet) getgljrnlctVO1();
gljrnlctVORowImpl nextSeqNoRow =(gljrnlctVORowImpl) seqForThisEmp.next();
Number next_seq = nextSeqNoRow.getSeqNo();
this.setGjhJrnlNo(next_seq); // In this line we have the value 45120
super.doDML(operation, e);
}But after create insert and commit operation in the UI i m having the values as -5565656565650000000000000
pls tell me if there any other solution for this
Edited by: wilhelm wundt on Oct 11, 2011 2:43 AM -
Removing the Cancel,copy,reset, check buttons of select option screen.
Hi All,
Please help me in removing the Cancel,copy,reset, check buttons from the select options screen of the WD4A.
Thanks & Regards,
Selvakumar M,.Use the following code in the WDDOINIT method after using add_selection_field method
data:
display_btn_cancel type abap_bool,
display_btn_check type abap_bool,
display_btn_reset type abap_bool,
display_btn_execute type abap_bool.
wd_this->G_HANDLER->set_global_options( "G_HANDLER is the attribute of IF_WD_SELECT_OPTIONS
i_display_btn_cancel = display_btn_cancel
i_display_btn_check = display_btn_check
i_display_btn_reset = display_btn_reset
i_display_btn_execute = display_btn_execute ).
Maybe you are looking for
-
How can i encrypt an ddecrypt a string using java
hai, can anybody know how to encrypt and decrypt a string using java.. please if anybody help me with a small example and with code thanks ravi chandra
-
Please correct my steps to modify and test CRM 5.0
Hello SDN! I don't have clear understand how to make modifying CRM 5.0. Extension guide give no clear understanding too. I'm new to JDI... My doings to prepare for modifiyng was be done fully according with Ext Guide. In Landscape Directory I setup o
-
Hi XMLP Gurus, I am trying to generate Purchase Order report using Bursting API. Requirement is to generate PDF document, containing POs, per vendor site. What I am doing is generating XML Data file using Java DataEngine API, which contains POs for a
-
This must be a real newbie question but...
I have uploaded my iCal to .mac but can't find it. How do I find it? If I click the button next to iCal it comes up with a page telling me how great iCal is and what I can do with it, but I can't find how to access the calendar
-
Don't want new conversation threading in hotmail. Suggested protocol for switching off says; Tools> options>more options etc. Well my tools button does not provide the facility "more options"! Help.