If then else

In one of Tim's blobs (XMLP 5.6.3 for EBS hits the streets) this was mentioned as a new feature:
"Conditional Formatting Enhancement in RTF Templates
Now in addition to the xsl:if statement, you can also use the "It...Then...Else" construct in RTF Templates to define conditional formatting."
Does anybody know the syntax? This one was available before: <?xdofx:if element_condition then result1 else result2 end if?>.
I was hoping that it would be an improved <?if:condition?> statement, such as <?if:condition?>text1<?else?>text2<?end if?>

Unfortunately nobody answered until today.
I assume that the "new feature" isn't implemented in the way dvukajlovic mentioned? For I have use of <?if:condition?>text1<?else?>text2<?end if?> as well...

Similar Messages

Sum function within if/then/else (xdofx:if)

I'm attempting to display a total at a particular group within my report. This total is conditional and should choose to display a placeholder value or the sum of another placeholder value (in a child group).
I have been able to vary my output based on the value I want to check: FIXED_QUOTE_FLAG - I have the if/then/else working in a simplified fashion
I can display literals and some placeholders correctlly eg. print a literal value of 00110011 or the value of placeholder QUOTED_PRICE
I can also display a calculated placeholder, using sum within the group I am concerned with: sum (current-group()/ACTIVITY_CHRG)
But when I try to get everythign working together ...
I cannot get the sum to work inside the if/then/else condition. The result is NULL (blank in HTML output).
The following is the snippet which is not working correctly:
<?xdofx:if FIXED_QUOTE_FLAG = 'Y' then QUOTED_PRICE else sum (current-group()/ACTIVITY_CHRG) end if?>
Message was edited by:
gareth_adamson

To answer you first question, perhaps sum is not a supported function in the xdofx namespace. It's annoying when this problem comes up because xdofx namespace seems to be the only way to do if then else clauses. I'm not entirely certain on the above, but you could resort to using BI Publisher's built-in if statement.
For your problem, something like this:
<?if: FIXED_QUOTE_FLAG='Y'?>
QUOTED_PRICE
<?end if?>
<?if: FIXED_QUOTE_FLAG!='Y'?>
<?sum(current-group()/ACTIVITY_CHRG)?>
<?end if?>
EDIT:
There is a way to do if else without xdofx namespace. It is done with <?choose:?> <?when:?> and <?otherwise:?> tags. Here is example syntax copied from Tim Dexter's blog:
<?choose:?>
<?when:count(TRX_NUMBER) > 0?>
Invoice Table
<?end when?>
<?otherwise:?>
No Data Found
<?end otherwise?>
<?end choose?>
To answer the second question about a running total, you will need to use the <?xdoxslt:set_variable($_XDOCTX,'var_name',var_value)?> and the <?xdoxslt:get_variable($_XDOCTX,'var_name')?>. This method of working with variables is the only method that allows you to update a variable. This makes it good for running totals. Consult the official user guide under "Creating an RTF Template" the section about using variables and calculating running totals.
So, in your problem, once you get the first part working, you will have to add that value to your running total. It will look something like this:
<?xdoxslt:set_variable($_XDOCTX,'running_total',xdoxslt:get_variable($_XDOCTX,'running_total') + conditional_value)?>
Remember to initialize the running total to zero! Hope this helps.
Thanks,
Matt Soukup
Message was edited by:
Matt Soukup

Problem with IF THEN ELSE in RTF template

HI ALL,
I have two layouts in the RTF template. Based on the parameter value it has to show the value.
For example if P_State='United States' then first layout should come. else second one should come.
I tried to use the IF Then else logic through the form field but i am getting error.
Please help on this to get it.
Regards
Boopathi

You can do that.
i guess, the syntax you are using is wrong.
please refer documentation or this forum for choose:
Use choose statement. it s better.
Or send me the template to my id in my profile. or upload it here http://apps2fusion.com/forums/viewforum.php?f=60

If Then Else Statement in SAP R/3 BW

Hi,
Does anyone know how to create an If Then Else statement in BEX?
Thanks,
Mounika.

Hi mounika,
do this way
If 'material number' > 0.
rslt = 'enter into table'.
else.
rslt = 15.
endif.
A True condition always evaluates to 1, a False condition evaluates to 0.
for more quieries in bw ..pls go through the link
http://sap.ittoolbox.com/groups/technical-functional/sap-bw
pls reward if helps,
regards.

Select in CASE statement or in IF-THEN-ELSE

I have been struggling for a week with a problem and still can't solve the way I want.
Given four text fields in page : p1_name, p1_place_name, p1_place_number and p1_place_init_letter - where user types text and press 'Search' button to see the results.
p1_name finds results in table EMPLOYEES
p1_place_name, p1_place_number and p1_place_init_letter find results in table PLACES
the two tables are linked by id_place field
I would like reports to be shown depending on search results:
- if p1_name exists and (p1_place_name and p1_place_number and p1_place_init_letter) exist AND EMPLOYEES.id_place = PLACES.id_place then a single report shows only employee row
- if p1_name exists and (p1_place_name and p1_place_number and p1_place_init_letter) exist AND EMPLOYEES.id_place # PLACES.id_place then two reports showing 1) employees with name = :p1_name and 2) places with name, number and init_letter = :p1_.....
- if p1_name not exists and (p1_place_name and p1_place_number and p1_place_init_letter) exist then a message with 'NO EMPLOYEE' and report shows only places where name, number and init_letter = :p1_.....
- if p1_name exists and (p1_place_name and p1_place_number and p1_place_init_letter) not exist then report shows only employee row where name = :p1_name and message with 'NO PLACE'
- if p1_name not exists and (p1_place_name and p1_place_number and p1_place_init_letter) not exist then messages 'NO EMPLOYEE' and 'NO PLACE'
I do NOT know if it is possible, and if it is, then what do I have to use : IF - THEN - ELSE or CASE ?
I tried to build HTML report region conditionally shown for each situation, but they do not work the way I want.
Could you please help me ?
Thank you in advance !

Agree with Dan. Use a dedicated report region for a unique query. Use a rendering condition to determine if that reporting region must be rendered (i.e. whether or not that reporting query must be executed ).
The alternative is creating a function that constructs the SQL query dynamically, based on the user supplied values for page items. Use the function as the source for the reporting region, instead of a SQL statement. (this is similar to creating a ref cursor for a client, minus the actual step to create the ref cursor - instead the source SQL for that ref cursor is returned).
Also consider asking your Apex questions in the dedicated Apex forum on OTN.

If-then-else in a select statement

hi, is it possible to make a if-then-else in a select query, something like:
select name, age, if(sex=f,1,2) as my_columnn from table1;
thx.

Hallo,
yes it is possible:
1. with decode
select name, decode(sex, 'f',1,2) as your_column from table1;
2. with case
select name, case when sex='f' THEN 1 ELSE 2 END) as your_column from table1;
Regards
Dmytro

Problem in If-Then-Else formula in report

Hello guys!
I use an If-Then-Else statement in a Calculated Key Figure (Cf. <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/23/17f13a2f160f28e10000000a114084/content.htm">Conditional Calculations</a> ) and it works great with basic calculations.
I have a query (done in BI 7.0) where I display, for each calendar months (via 0CALMONTH), the usage (stored in a normal key figure in hours) of several products.
I need to take into account only the products that have been used for at least 60% of the time of the highest product for each month. I a single product, for a month, has been used less than 60% of the highest one, it should be considered as not being used at all (so the calculated usage would be = 0), otherwise, its usage is counted as normal.
In order to achieve this, I thought I would display the normal usage (the regular key figure) in column A, a calculated key figure that determines the MAXimum usage for each month in column B (which should be the same for all products) and another calculated key figure that displays the result of the If-Then-Else statement in column C.
In rows, I have 0CALMONTH and the products.
HOWEVER, when I do this, the result is incorrect. This is probably because to determine the MAX usage, I use a local calculation option, which displays the correct maximum usage on each row but it's not correct when used somewhere else.
MY QUESTION IS: HOW can I display the maximum usage for a month on all rows without using the calculation option (and therefore would be correctly used by the If-Then-Else statement. I tried an aggregation exception but it doesn't really work (it works only on the total, but I need to do the calculation on each individual row).
Any useful comment will be greatly appreciated 
Thanks in advance!

Hi Francal ,
Have you tried it . The constant selection will work if you have defined the calculated key figure correctly i.e. Aggreagtiomn "Max" with "product" as ref characteristic. Then you have to use this calculated key figure in your query , restrict it by "product" and make it a constant selection.
The calculated key figure it self will bring the highest usage for Month + product + ( any other characteristic you have in query ) but this will only apply to result . If you use constant seelction on top of it it will make sure that you see same value for all product for a particular month( and other characteristic combinations if you have ).
I have built similar queries and it works . By the way which versions of backend and frontend you have ??
Regards
Sanjay

Problem with if-then-else using BI Answers dataset

Hi, I'm having issues using the if-then-else logic with a BI Answers dataset. I'm running two versions of a report - one that access the SH schema tables directly, and one that uses a BI Answers dataset based on the SH schema.
My problem is with the if-then-else operator. It works fine against the relational tables when I use the following syntax:
<?xdofx:if CUST_GENDER = 'M' then 'Mr.' else 'Ms.' end if?>
However, when I go against a BI Answers report, the name of the field changes from CUST_GENDER to Customers._Cust_Gender_. If I make an exact find and replace on the if-then-else code, it doesn't work (nothing at all displays)
<?xdofx:if Customers._Cust_Gender_ = 'M' then 'Mr.' else 'Ms.' end if?>
Can anyone help?
Thanks,
Scott

Is it possible that any of the fields have null values? If so, see my blog post about null handling in Crystal for more information: What is Null and Why is it Important for Crystal Reports | SAP BI BLOG
-Dell

Query if-then-else logic with calculation

Hello,
I want to calculate within a BEX-formula.
I have two key-figures:
- Quantity
- Value
The logic should be like this:
IF Value > 0 THEN Value / Quantity ELSE 0
( / means: divided)
How can I reach this?
The URL
http://help.sap.com/saphelp_nw70ehp1/helpdata/de/e3/e60138fede083de10000009b38f8cf/frameset.htm
does not help me.
Thanks for your help,
Thomas

That is the way to perform if then else...
As long as boolean operations returns 0 or 1 you must play with that in order to get the desired result.
In case you have DIV problems you can use this operator:
NDIV0 (x): Is equal to 0 with division by 0, otherwise x.
NDIV(<Expression>)
Delivers 0 if the expression named in <Expression> gives a division by 0 in
the calculation. Otherwise, the result is the value of the expression.
Is used to
- Avoid the output of an error message
- Continue calculating with a defined result
Please give an example if I am missing something.
Regards,
Sebastian,.

Java If/Then/Else Statement

Hello,
Just wondering if it is possible to call one java file from within another.
I'm thining wiht an if.then/else statement similar to
If x==true
then run file1.java
else run file2.java
any examples of this, or if it is even possible would be appreciated.

This is something like what I would do.
public class FileRunner {
    public static void main(String [] args) {
        if ( args[0].equals("file1") {
            File1 file1 = new File1();
            file1.init() //method you define in File1 that runs everything that would've been in the File1's main method
        } else if (args[0].equals("file2") {
            File2 file2 = new File2();
            file2.init() //method you define in file2 that runs everything that would've been in the File2's main method
        } else {
            System.err.println("Invalid argument");
            System.exit(1);
java.exe FileRunner.class file1
java.exe FileRunner.class file2The other method is to start a new jvm from within java, but that gives you less control than this imo.

Nested if-then-else with double condition

Hi everybody, I tried to see on the forum how to build a complex if-then-else statement....but I didn't still find an answer
So, I'll explain my situation:
First I have to check if the field PROJ_DT_TO is null or not and then the language parameter:
1. if the field PROJ_DT_TO IS NULL then I have to check the language parameter:
a) if this last one is equal to 'English' I want to write inside my template 'Today',
b) if instead is equal to 'Greek' I want to write 'Σήμερα'
2. else if the field PROJ_DT_TO IS NOT NULL, again, I have to check the language parameter:
a) if this last one is equal to 'English' I have to write <?format-date:PROJ_DT_TO;'MMMM yyyy'?>
b) if instead is equal to 'Greek' I have to write <?format-date-and-calendar:PROJ_DT_FR;‘MMMM yyyy’;'GREGORIAN';'Europe/Athens'?>
I used the following syntax...but it didn't work...
<?choose@inlines:?>
<?when@inlines:PROJ_DT_TO=''?>
<?xdofx:if $p_language = 'Ελληνικά' then 'Σήμερα' else if $p_language = 'Αγγλικά' then 'Today' end if?><?end when?>
<?otherwise@inlines:?>
<?xdofx:if $p_language = 'Ελληνικά' then <?format-date-and-calendar:PROJ_DT_FR;‘MMMM yyyy’;'GREGORIAN';'Europe/Athens'?> else if $p_language = 'Αγγλικά' then <?format-date:PROJ_DT_TO;'MMMM yyyy'?> end if?>
<?end otherwise?>
<?end choose?>
The first piece, until the first <?end when?> instruction works....it's the <?otherwise@inlines:?> and the rest which doesn't work.....
If, instead, I use (without reaching my goal):
<?choose@inlines:?>
<?when@inlines:PROJ_DT_TO=''?><?xdofx:if $p_language = 'Ελληνικά' then 'Σήμερα' else if $p_language = 'Αγγλικά' then 'Today' end if?><?end when?>
<?otherwise@inlines:?>
<?format-date:PROJ_DT_TO;'MMMM yyyy'?><?end otherwise?>
<?end choose?>
I see the date PROJ_DT_TO even if always in the date format 'MMMM yyyy'
Anybody knows how can I rewrite my statement in order to reach the if-then-else situation I metioned above ?
Thanks in advance
Best Regards
Alex

Hi Vetsrini, thaks for your answer and your hint !!
I tried your code, but without the command 'when@inlines' doesn't work...
So I tried this :
<?choose@inlines:?>
<?when@inlines:PROJ_DT_TO=''?>
<?xdofx:if $p_language = 'Ελληνικά' then 'Σήμερα' else if $p_language = 'Αγγλικά' then 'Today' end if?>
<?end when?>
<?otherwise@inlines:?>
<?format-date:PROJ_DT_TO;'MMMM yyyy'?>
<?end otherwise?>
<?end choose?>
and It works..
But, look at this ! I discovered on the manual that inside the Preferences it's possible to set the Report Locale with the language you want.....and if I set my Report Locale in Greek, using the code above I correctly see all dates in Greek....but ALWAYS !!
I need to see dates in Greek or English dinamically according to the value of the parameter p_language passed inside the template at the beginnig (<?param@begin:p_language?>).
Even if inside the code there is the double condition ($planguage = 'Ελληνικά' or $p_language = 'Αγγλικά') for the two cases PROJ_DT_TO='' or PROJ_DT_TO !='', I see ALWAYS dates in the language set inside the Locale Report....
Is there a way to manipulate the Report Locale Setting and make it dinamic ?
Thanks in advance
Alex
So this preference is static, even if inside my report I have the parameter p_language I can see the data and headings with

Implementing if then else condition

Hi! All
It would be very helpful if i can get answer of how to implement the condition below, using the functions available in graphical mapping editor....
I need to map 2 source fields to 1 Target field, based on the condition that field(source) is populated in the target field only if field 1 is null.
Source----->Target
part_id1----
>part_num(if part_id1 is null,then part_id2)
part_id2----
>
I tried using if then else function, it is working fine but errors out when part_id is null....need to make it work even when part_id1 or part_id2 is null.If both fields are null it should not populate anything.The boolean function is not accepting null inputs...
Please, let me know if there is a better way to implement this logic...Thanks a lot!
Regards,
Patrick

Jones,
Have this logic in your mapping:
part_id1>exists>and
part_id1>equals(textfunction)>null(take constant and dont put any value in it)>equals(text funciton)>false
Give the above two to if
Then in the then part give part_id1 and in the else part give part_id2.
So in the above if part_id1 exists and equals to null then part_id2 will be output and part_id1 exists and not equals to null then part_id1 will be the output and part_id1 doesnot exist then part_id2 will be the output.
Regards,
---Satish

Wierd Behaviour of IF then ELSE standard function

Hi All,
I am facing a very wierd behaviour of the IF then ELSE function in a mapping.
Condition to be checked: if GDS_id = 1, then (condition 1 - RFC lookup ) ElSE (condition 2 - JDBC Lookup followed by an RFC lookup).
Issue: The input payload is 0-unbounded with a possibility of a different GDS_id values.
Case 1 :
As shown below, in case the input payload has 3 repitions of the RECORD, with the Fit set having GDS_ID = 01, the mapping runs perfectly fine . All the If then Else branches are getting executed.
Case 2:
Where as iF the first GDS_ID != 01 (not 01) , thenthe target value is not getting populated properly .
I have tried all the possibilities and combinations but i am unable to resolve this. Please help.
Attached the screen shot of the message mapping, and sample test results of both the use cases.
For instance, below is a sample payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
<Record>
 <booking_date>08012013</booking_date>
 <iata_code>2325540</iata_code>
 <gds_id>01</gds_id>
 <pos_code>RD3A</pos_code>
 <gds_code>01</gds_code>
 <net_booking>11</net_booking>
 </Record>
<Record>
 <booking_date>08012013</booking_date>
 <iata_code>2325540</iata_code>
 <gds_id>02</gds_id>
 <pos_code>54S8 </pos_code>
 <gds_code>02</gds_code>
 <net_booking>11</net_booking>
</Record>
</ns0:mt_EMERGO_common>

Hi All,
I have changed the message mapping like below. Even though i am not getting my target filed as value. As per my requirement if GDS_ID=01 then perform the RFC lookup and pass the value to target fields KUNNR and else GDS_ID=02 then perform the JDBC LOOKUP and JDBC LOOKUP output to RFClookup .RFC LOOKUP output pass to my target field KUNNR.
Result of my mapping is 1st record only populated KURNNR in Target side and 2nd record not showing as KUNNR filed in target side .But I have taken look on display queue in If then else out showing 2 values but it is not passing to target filed.
Please provide any suggestion to resolve this issue.
Please find the mapping logic:
Please find the test screen:
Please find the test Data:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
 <Record>
 <booking_date>08012013</booking_date>
 <iata_code>2325540</iata_code>
 <gds_id>02</gds_id>
 <pos_code>54S8 </pos_code>
 <gds_code>AA</gds_code>
 <net_booking>11</net_booking>
 </Record>
 <Record>
 <booking_date>08012013</booking_date>
 <iata_code>2325540</iata_code>
 <gds_id>01</gds_id>
 <pos_code>RD3A</pos_code>
 <gds_code>AA</gds_code>
 <net_booking>11</net_booking>
 </Record>
</ns0:mt_EMERGO_common>
Regards,
Ramesh

How to write Boolean function (If Then Else) For Date Caluclation.

Dear All,
I have a scenario where i need to calculate Position time hold by an employee in an organisation.
I have 2 date Char ( DATE FROM & DATE TO), the problem is that is , If an employee is having
2/3 position in an organisation its current position End Date is always 31.12.999 as its End date is
not know. For previous position End Date is maintained.
My requirement is to calculate Position hold time including Current position.
Can it be done directly in formula variable with If Then Else condition.
or i need to write user exit if its exit,
please guide me for ABAP Code.
Thanks V V much.
Regards,

Hi,
Following options are available for you:
1. Is the valid to, valid from dates available as a result of standard time dependency of navigational attributes? if yes , you can not use them in calculations, in such case you may have to write a full fledged routine at formula variable, using uxer exit.
2. Another simple method, that i would suggest would be using temporal joins (infoSets), that precisely fits you case.
Helpful links:
About Infosets:
[http://help.sap.com/saphelp_nw70/helpdata/EN/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm]
About Temporal joins:
[http://help.sap.com/saphelp_nw70/helpdata/EN/11/723c3b35703079e10000000a114084/frameset.htm]
Hope this helps.
Cheers,
Sumit

Question regarding the If-then-else function

Hi folks ,
I have been constantly putting threads on this subject for the past day, hope it doesn't annoy any one here.
My scenario is really simple, and i am almost close to the solution, but there is just 1 thing missing and i know that is a very small thing, could be the context too. Hope some one can help by pointing it out>
Mapping:
In my source i have a header(0-unbounded) & detail(0-unbounded). At a given instant either header / detail will occur in source, depending on that the target node "response" will occur(0-n times)
i have achieved this in the mapping.
the problem is this:
Both the Header/Detail have a field in it called Sequence# which is mandatory and can occur only once in the Header/Detail node.
Now depending on what occurs: ie Header/Detail i need to map that particular seq# into my Target Respone's SEQ_#.
I have done the mapping for this and have done a standalone testing.
Mapping: Check if HEADER EXISTS, if yes? then map the HEADER.Seq# to TARGET.Seq#
Here are my findings:
Scenario1: 3 header nodes(No Detaili) each with a seq # in it. Out put 3 Target node each with 3 seq # in it.
Scenario2: 2 Detail Nodes(No header) each with a seq # in it. Output fails to produce the 2nd Target Structure's Seq# and Fails
When i look into the Display Queue in the mapping , i examine the iF-Then-Else function:
Since HEADER doesn't exist i c 1 Suppress in my If-Condition hence the if condition becomes FALSE., now since its false its supposed to map the seq# from my detail. (This case i have 2 ).
But in the output of the IF-Then Else, i get out only 1 seq # which is the 1st one,
What i am thinking is that the exists condition is giving out only 1 FALSE instead of 2, If there were 2 false from the exists then i would have had both the seq # in my output,
I hope my question is clear, Would appreciate anysort of help . And i apologize if I seem to be brigning up the same question over again experts.
I don't wnt to create a UDF for this matter because i know there is something i am not doing right,
Hank

Sorry I could not give my udf in my last post.
Udf1:
Create a context udf and name it as RemoveSuppress. Take two input arguments a and b. Imports: java.*;
Add this code:
 //write your code here
boolean found = false;
for (int i=0;i<a.length;i++) {
 if (a.equals(b[0])) {
 found = true;
 break;
if (found == true)
 result.addValue("true");
else
 result.addValue("false");
Then it should work.
Regards,
---Satish

If then else emulation

it is not very efficient, but nevertheless works.....
since xmlp is very limiting on the size of a statement, you need to keep it simple.....
Its better then using multiple if statements which is what we had to do in the past.
5.6.3 is supposed to have a if-then-else statement so can't wait to get there.....
here is the code....
<?choose:?>
<?when:sum(LINE_UNIT_SELLING_PRICE)<400?>LOW<?end when?>
<?when:sum(LINE_UNIT_SELLING_PRICE)>399 and sum(LINE_UNIT_SELLING_PRICE)<4000?>MED<?end when?>
<?otherwise:?>HIGH<?end otherwise?>
<?end chose?>

other helpful syntax
<? format-date: @orderdate; 'DD-MMM-YYYY' ?>
<? format-number: ./price; 'L999G999D99' ?>
TOTAL ITEMS: <? count(items/item) ?> works like sql count
<? for-each:items/item ?> Item <?position() ?> <? end for-each?> works like sql rownum function
to set and get variables
Hope someone finds these useful....

If then else

Similar Messages

Maybe you are looking for