If thieves restore your iphone,can you still find the device on the map?

i lost my 5s and i just want it back..i wass atctivate find my phone on my it.but if who found this device restore the device,will find my phone feature still work??please..if i cant find my device on map i will just let my device gone and neve hope the device will back.
Thx

But the thieves still can restore it via dfu mode right.?.even they will stuck on icloud activation when they finished restore it..when that happen can i track my device on the map when they try to activate my device ??as we know the device must be connected to internet when this procces happen.
Or if they can bypass the activation lock..can i still find my phone on the map??really worried about this

Similar Messages

FaceTime on your computer can you still receive phone calls to an iPhone under the same ID

if you FaceTime on your computer can you still receive phone calls to an iPhone under the same ID

You can do this on the phone and the iPad. Settings>FaceTime>iPhone Cellular Calls>Off.

HT4623 when you restore your iphone do you loose all data

When you restore your iphone do you loose all data????

When you restore all new - you will lose text message, pictures.. however you can sync back contacts/apps/music via itunes. IF you imported your pics to your computer you can sync it back with itunes.
If you restore from backup - then no data loss.

Once you restore an iphone, can you un restore and get it all back?

Once you restore an iphone, can you un restore and it get it all back?

Once you restore the iPhone, you can choose to load a backup onto it from either iTunes or Settings on the device, but make sure to have a recent backup before performing the restore. If you are asking about a device that is already restored, then no, there is no way to retrieve the prior state of the device unless you have a backup of it.

I have lost my iphone, can i still find out my IMEI number by Apple ID?

I have lost my iphone, can i still find out my IMEI number via Apple ID or iTunes(the lastest version)?

If you backed up your phone to your computer using iTunes, go to iTunes>Preferences>Devices and hover your mouse over the name of your backup on the Backups list. If would also be on your box if you still have it.

Can you still get internal HDs for the G4 PB 12"?

I still use my trusty 12" Powerbook G4 for my hobby of freelance writing and photography. Indeed, the ONLY thing currently 'wrong' wih it - for what I need from it these days - is that the internal 40Gb hard drive is now way to small for all the stuff I want to keep on it.
Is it still possible to get compatible internal hard drives for it? If I can get a 500Gb internal hard drive, it'll save me the expense of having to buy a whole new laptop. Which seems a bit silly as the Powerbook G4 is still more than adequate in every other way!
(I know I could get an external drive, but an internal one woould be a whole lot better!)
Can anybody help, please?

Robin:
As noted, yes, PATA drives are still available for your computer. Here is a list of available drives for your computer at OWC. You do have a lot of tiny screws to deal with, but it can be managed. The most troublesome are two tiny screws on each side of the case. Be very careful not to damage the heads of the screws. You will also discover that the 1.5 GHz version does not have an EMI finger to be removed, as noted in the step by step directions. In addition to the step by step directions from iFixit here are few tips you may find helpful:
• Print out the ifixit directions as well as the screw guide ahead of time.
• Be sure you have the right tools. You don't want to damage the screw heads or you may never get them out. And the Torx screw driver is critical. For a spudge I use the handle of an old toothbrush (choose one made of hard plastic), cut off the brush and bevelled the handle end like a flat blade screw driver). For some spudge jobs a credit card will do the trick.
• Picking up on one user’s suggestion, I clicked on the pages of each step which involved removing screws to enlarge, then printed out the pages. I poked holes in the paper where the screws were removed, poked the screws in the holes and stacked the pages in order in which the screws were removed. Reassembling was a lot easier. No cups to tip over and spill. No guessing. Each screw was exactly in the right place. You can use an ice cube tray, egg carton, dixie cups etc. I previously used small medicine cups one for the screws in each step. I nested them so that the last ones out and the first to go back in are on top. (Some users report cutting up the screw guide and placing the applicable section in each container.)
• Be very careful pulling out leads. Hold the lead as close to the plug as possible and wiggle (the plug ) to loosen its grip. Don’t hold the wires and pull as that can damage the cable, or worse, in some instances pull the wires out of the plug. Indeed, some users have pulled the socket off the logic board! Use needle nose pliers or tweezers if you can access the plug, or nudge the plug with a small instrument to help loosen its grip.
• Use force gently in removing parts. Separating upper and lower case takes some doing. Use a plastic tool (spudge) so as not to mar the case.
• Refer to the screw guide when reassembling computer. Putting longer screws in the wrong place can perforate the circuit board.
Please do post back with further questions or comments.
cornelius

HT201210 i keep getting errors while i try to restore my iphone. can you please help?

Hello. I wanted to restore my iphone but i keep getting errors while i'm at it. 1015 and some others. It is still in recovery mode and i cannot seem to solve anything. Can you please help? I have an iphone 3G which used to work on iOS 4.2.1. Thanks

ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Can you still drag a bookmark onto the bookmark toolbar

Okay i've searched all over the net and have finally given up so i have to ask. From what i understand the site icons are no longer shown in the url bar you now see a security lock/key whatever. From what I've found this is a security feature and was meant to happen. But what I want to be able to do is drag a bookmark onto the bookmark bar as you use to be able to by grabbing the websites display url picture. Is there anyway to do this? I swear I have drug from everywhere and can not figure it out if there is an easy way. Is the only choice now to download a button package and then make your own buttons? I feel as if I am missing something very easy and can also not find a package that will let me use a websites actual buttons.
Thank you for any answers I'm sure this has been asked before and I am just not able to locate what I'm looking for. Also using windows XP and Firefox version 28

To be on the same page with you, when you say, <blockquote>From what i understand the site icons are no longer shown in the url bar you now see a security lock/key whateve</blockquote>
I'm assuming you are talking about this? (see link below)
https://support.cdn.mozilla.net/media/uploads/images/2014-04-08-20-09-19-4ae091.png
Site icons are now visible on the tab that page is on (see image below)) ('''You can also drag that tab into the bookmarks bar''') however that security lock means that the site is protected by SSL and is more secure than HTTP
*See [http://www.truthorfiction.com/rumors/s/secure-web-sites.htm The Difference between HTTP and HTTPS]
Yes, you are still able to drag that lock icon to your Bookmarks toolbar (if it is hidden, go to Firefox >Options > and click on Bookmarks toolbar (if it's not checked) to enable it. Then simply drag the lock down into the new bar.

Can you still use soft motion without the scan engine on crio?

Where are the trajectory generator property and invoke nodes in softmotion for LV 2011?
These functions are not longer found in the pallet? Are they no longer supported?
All the new soft motion examples are using the scan engine. Can I use soft motion without the scan engine????
Steve
SteveA
CLD
FPGA/RT/PDA/TP/DSC

Hi Ian,
I apologize that this wasn't stated in the release notes. While your code should have upgraded without breaking, the release documentation should have mentioned that the advanced trajectory genertor functionality is no longer supported. If you still want to use the trajectory generator functions, they are still shipped with SoftMotion, they are just not on the palette. I have attached a zip file that has 4 .mnu files that will get them on the palette. To install these, do the following:
Close LabVIEW
Make a copy of the following directory: C:\Program Files (x86)\National Instruments\LabVIEW 2011\menus\Categories\VisionMotion\_nism. In case something goes wrong, we will want to have a copy of this directory so that we can replace it.
Copy the 4 .mnu files from the attachement into the above _nism directory (the original, not the copy). If it asks you to replace any of the exisiting files, please do. You don't have to copy the readonly.txt file.
Start LabVIEW. You should know have the trajectory generator functions in your SoftMotion Advanced palette.
Keep in mind that we no longer support these functions. This means that they are not tested in new releases and any bugs will likely not get fixed.
I would recommend that you use the new API for any new designs. You can still get most of the functionality of the old API but without the complexity. If you want to generate setpoints at 5ms then you will run the scan engine at 5ms. This is certainly easier than having to do the timing yourself, but it does take away some control from the user. If you give me a brief overview of what you mean by synchronization, I will let you know the best way to do it with the new API.
Thanks,
Paul B.
Motion Control R&D
Attachments:
_nism.zip ‏4 KB

If someone blocks me on iphone can i still receive text messages from the person that blocked me?

Im in a group chat with 5 people (including myself) and everybodys been just saying "oh you got the job?" and i just didnt receive any messages from her saying how was it....im just a little confused...DID she block me or??

The following from http://www.wired.com/gadgetlab/2013/09/iphone-call-block-faq/ indicates there currently isn't a way:
I get my iMessages on my Mac. Are those blocked too?
Nope. There’s currently no way to block someone from iMessaging your Mac — the iPhone block feature seems to be tied to the physical device, not your SIM, and not your Apple ID or iCloud account. This also means that even if you’ve associated email information with a blocked contact, the iPhone won’t block their emails.

Can you restore your iphone to the latest backup through icloud

if you need to restore your iphone can you do this using icloud restoing it the the last time you backed up iphone on icloud or can you only restore your iphone useing itunes on your computer

You can restore to an iCloud backup.

How do you restore your iphone from a certain date?

Is there a way to restore your iphone 4s from a certain date (i.e. the last time you synced)? I downloaded a program today that enables me to access work email from my iphone; however, the security restrictions it has put into place on my phone (not my employer's phone) are making me want to remove the program. I have been told by out IT department that I can only restore my iphone & start over from scratch.

Well, if you create iCloud backups, they overwrite one another every night around 1:30 AM, so that may not be so helpful unless of an emergency. The only other way is through an iTunes backup. When an iTunes backup is overwritten, it is sent to the recycling bin. It may take a while to determine which backup you want to open in iTunes, but once you do, you can restore your phone to the backup date of your choice.
Thank you for choosing Apple.

Downgrading iTunes to version 8 - can you still access the iTunes Store ?

Well guys ? Those of you who have successfully downgraded to version 8..
Can you guys still access the iTunes Music Store ?
Can you still buy tracks , preview tracks the old way , and buy songs online with the iTMS & iTunes 8 ?

http://www.oldversion.com/iTunes.html
To downgrade from iTunes 9 to version 8 or 7.7 you can try the following on a Mac (Windows instructions follow):
- First acquire the correct software package. Select iTunes 8.0.2 or iTunes 7.7.1:
http://support.apple.com/downloads/iTunes8_0_2_forMac
http://support.apple.com/downloads/iTunes7_71
- Uninstall iTunes 9:
Open the Applications folder and move iTunes into the Trash
Restart the Mac and empty the Trash.
- Open your Music directory and open the iTunes folder
- Copy "iTunes Library.itl" and "iTunes Music Library.xml" to your desktop
- Copy "iTunes Library Extras" and "iTunes Library Genius" to your desktop
- DO NOT DELETE this music library iTunes folder
- Install the older version of iTunes
- Run iTunes and select "File" -> "Import"
- Choose the file "iTunes Music Library.xml" from the Desktop
- Your library and playlists will be rebuilt in the older version of iTunes
To downgrade from iTunes 9 to version 8 you can try the following in Windows:
- First acquire the correct software package. Select iTunes 8 from the following site:
http://www.oldversion.com/iTunes.html
- Navigate to your iTunes music library (normally in Music/iTunes)
- Copy "iTunes Library.itl" and "iTunes Music Library.xml" to your desktop
- Copy "iTunes Library Extras" and "iTunes Library Genius" to your desktop
- DO NOT DELETE this music library iTunes folder
- Uninstall all iTunes Software
- Use Control Panel uninstall to remove all of the following:
Apple Mobile Device Support, Apple Software Update, Bonjour, iPod for Windows, iTunes, QuickTime
- Under the folder c:\Program Files delete the following folders:
Apple Software Update, Bonjour, iPod, iTunes, QuickTime
- Search for any hidden folders named "Apple Computer" or "Apple"
- These may appear under AppData or Local/AppData
- Delete these folders
- Restart your Windows machine
- Install the older version of iTunes
- Run iTunes
- DO NOT SELECT options to automatically add media files
- Select "File" -> "Import"
- Choose the file "iTunes Music Library.xml" from the Desktop
- Your library and playlists will be rebuilt in the older version of iTunes

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Using an iPhone without a wireless service plan

How can you get back into your iPhone if you don't remember the passoword?, How can you get back into your iPhone if you don't remember the password?

Help! My daughter changed the password on her iPhone and she can't remember it. How can she get back into it. Restoring is not an option so I'm hopeful there is another way. Thanks!

Hey KimmyP123,
Thanks for the question. I understand your daughter has an unknown passcode on her iPhone. The following article provides a few solutions for this situation:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
I notice you are looking for solutions other than restoring, the article does outline how you can use iCloud's Find My iPhone:
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Thanks,
Matt M.

If thieves restore your iphone,can you still find the device on the map?

Similar Messages

Maybe you are looking for