"If this borrowed item was fulfilled with one or more...." message when I return library book

When I use Adobe Digital Editions 2.0 to return a library book I get the following message, "If this borrowed item was fulfilled with one or more other items, returning it would also return all of these items". What does this message mean?

Might want to have your MacBook looked at.

Similar Messages

This mailbox database is associated with one or more active PublicFolderMove requests

I'm trying to clean up an Exchange 2013 installation (CU2) which is the result of a migrated Exchange 2007 done last summer.
This installation contained several databases which we are trying to slim down to just one, but I've run into some trouble deleting one of these databases. I've made sure that there's nothing left in the database but the Monitoring mailboxes, but when I
try to delete the database I get the following error:
This mailbox database is associated with one or more active PublicFolderMove requests. To get a list of all PublicFolderMove requests associated with this database, run Get-PublicFolderMoveRequest | ?{ $_.RequestQueue -eq "Public Folder Database" }. To remove a PublicFolderMove request, run Remove-PublicFolderMoveRequest <Recipient ID\Request Name>.
If I look into that one further I can see the following:
[PS] C:\Windows\system32>Get-PublicFolderMoveRequest | fl
RunspaceId : d07e91a4-aadb-4c2a-8e01-68127464e8e0
SourceMailbox : contoso.local/Users/Contoso
TargetMailbox :
Name : PublicFolderMove
RequestGuid : 65c5d048-0e56-4c01-88ce-8594699826ee
RequestQueue : Public Folder Database
Flags : IntraOrg, Pull
BatchName :
Status : InProgress
Protect : False
Suspend : False
Direction : Pull
RequestStyle : IntraOrg
OrganizationId :
WhenChanged : 2013-06-25 16:03:10
WhenCreated : 2013-06-25 16:03:07
WhenChangedUTC : 2013-06-25 14:03:10
WhenCreatedUTC : 2013-06-25 14:03:07
Identity : \PublicFolderMove
IsValid : True
ObjectState : New
So, I've found out that I can run "Remove-PublicFolderMoveRequest <Recipient ID\Request Name>" to remove that request, but I find it a little disturbing that we've had that job for 9 months in the background, and I'm unsure of what will happen
if I actually delete that job.
The Target Mailbox is also empty. Shouldn't it contain something?
We want to keep the Public Folder Database in the current database and it should not have anything to do with the database I'm trying to delete (it does not reside there right now).
Any thoughts on how to proceed, and what the reason for this might be? Could it be something that was done while migrating from E2k7 to E2k13 and never was cleaned up correctly?
Any thoughts will be greatly appreciated!

Yeah, thanks! But, the problem is that I can't delete it because of the error message in the first post ;) Namely:
This mailbox database is associated with one or more active PublicFolderMove requests. To get a list of all PublicFolderMove requests associated with this database, run Get-PublicFolderMoveRequest | ?{ $_.RequestQueue -eq "Public Folder Database" }. To remove a PublicFolderMove request, run Remove-PublicFolderMoveRequest <Recipient ID\Request Name>.

Exchange 2013: This mailbox database is associated with one or more active mailboximport / Cannot uninstall exchange

We have a corrupted installation of Exchange 2013 due to installating CU6
New Exchange server is already installed and mailboxes are migrated over, I am now in the process to uninstall the old exchange 2013 so we can decomission it but I get this error when I try to run uninstall
"This mailbox database is associated with one or more active mailbox import,To get a list of all Mailboximport request associated with this database, run Get MailboxImportRequest | ?{ $_.RequestQueue -eq "<Database ID>"}....
But when i run this command I get an error of" The Get-MailboxImportRequest is not recognized as a cmdlet...
Any advise is appreciated
Thanks.

Hi ,
From the error message i came to know few things i have mentioned mentioned below .
If you want to remove the problematic exchange server , you need to remove the existing mailbox import requests.
For that you should need to have the required permission for the user account from which you are trying to execute the command
Just check your user account is having the Mailbox Import Export role permissions .
If you have the required permissions then go ahead and execute the commands
Get-MailboxImportRequest | ft -au ( this is to see how many no of the mailbox import request are available
Remove-MailboxImportRequest
( this command is to remove the entire mailbox import move request)
Once you have done with that , then you start proceeding uninstalling the exchange server .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card

A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory

When looking at the module for a LabVIEW VI being called from TestStand, I get the following message:
A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory. Please reinstall it or repair it.
I made the mistake of cleaning up C: in my computer. Cleaning C:\National Instruments Downloads
Why would someone put bits of applications or modules, etc in such a directory?
I am not too crazy about restoring 11GB back into that folder. That's just insane!
Has anyone encountered this before? Any "easy" solutions? apart from re-installing TS...
Side note: I did not touch anything in the \Program Files|National Instruments\TestStand\AdapterSupport\LabVIEW
Solved!
Go to Solution.

Thanks PH,
I also had that. Fixed it.
I will not remove the ones in the NI downloads folder.
I will eventually need to remap everything to the appropriate drive.
I partition the drives into:
C:\     Windows and associated folders. Mostly OS stuff
E:\     Applications (this is where it will end up)
F:\     Files
G:\    Storage
H:\    Backups
I try to do what I normally implement in Linux. I hate sharing the OS with everything else.
Cheers,
RayR

My iphoto library database was corrupted with one file taking over all images i purchased aperture, selected no for importing duplicates and yet it is still importing duplicates what can i do??????

my iphoto library database was corrupted with one image taking over every other image on the database
i purchased aperture and am in the process of copying my i photo library , i ticked no to importing duplicate images and yet it is still importing many duplicates including the photo which took over my old iphoto library
help how can i stop it from importing the duplicates?

my iphoto library database was corrupted with one image taking over every other image on the database
What exactly do you mean by that? Do you mean one thumbnail only was visible in the iPhoto Window? What? This is the sort of thing that's fixed easily by an iPhoto rebuild. Gives us some more information and we may be able to help with that - iPhoto version and a description of exactly what's happening will help.
i ticked no to importing duplicate images and yet it is still importing many duplicates including the photo which took over my old iphoto library
A couple of thoughts here: If the iPhoto Library is corrupted and Aperture is importing from this damaged Library well you can't expect that it will all go easily, can you?
The iPhoto Library contains two versions of edited photos. Are you sure that you're not seeing the second version?
Regards
TD

Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link.

I have two iTunes accounts. When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad. Ian trying to link it to the other account instead

I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead

johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want.

HT5622 I had this pop up: Add (phone number) for Facetime and iMessage. This phone number was associated with AppleID on iPhone. I havent used it or done anything. What does this mean? Is someone using my ID and do they have my pasword.?

I had this pop up: Add (phone number) for Facetime and iMessage. This phone number was associated with AppleID on iPhone. I havent used it or done anything. What does this mean? Is someone using my ID and do they have my pasword.?

If it isn't from something you did (like update iOS on an iPhone, or activate a new iPhone), then yes, I would be suspicious.

Multiple iphones on 1 apple account with one apple password. and when i airdrop my mom my number shows up as my brothers number.... this only happens on airdrop

multiple ipones on 1 apple account with one password... when i airdrop my mom it shows up as my brothers contact on her phone... what should i do?

Yes, I understand. That number can't be used for SMS, however, The iPad has no built in SMS capabilites, only iMessage. The only way you can get an iMessage to show with a phone number is if you have an iPhone tied to the same Apple ID. Otherwise, the iMessages will show up with your Apple ID.
If you want to SMS from your iPad, you will need an app such as TextFree.

How can I create a new Care Plan with one or more care tasks

Hello,
I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
Following code works fine:
CarePlan plan = new CarePlan();
plan.Name = "test";
this.PersonInfo.SelectedRecord.NewItem(plan);
It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
<tasks>
<task>
<name>
<text>Run 100 miles</text>
</name>
<description>Run 100 miles in 6 months</description>
<start-date>
<structured>
<date>
<y>2013</y>
<m>12</m>
<d>1</d>
</date>
</structured>
</start-date>
<end-date>
<structured>
<date>
<y>2014</y>
<m>6</m>
<d>1</d>
</date>
</structured>
</end-date>
<target-completion-date>
<structured>
<date>
<y>2014</y>
<m>12</m>
<d>31</d>
</date>
</structured>
</target-completion-date>
<sequence-number>279128532</sequence-number>
<recurrence>
<interval>
<text>Once</text>
</interval>
<times-in-interval>10</times-in-interval>
</recurrence>
<reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
</task>
</tasks>
Any help is welcome
Wilfred

Hi Wilfred,
Have you tried this?
CarePlan plan = new CarePlan();
plan.Name = "test";
plan.Tasks.Add(someTask)
If you have a task list already, you would need to enumerate through it and add one by one...
foreach (var task in existingList)
plan.Tasks.Add(task)

SSIS Error Text was truncated or one or more characters had no match in the target code page

I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH           ",
"EDWARDS             ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880    ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER              ",
"M",
"M",
"PBD $20/10+40%/20%            ",
00008.26,
"1184641367"

I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog!

How does schedule with RESTful API a Webi report for a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

Hello Ricardo,
have you try a call like this one ?
    <schedule>
      <name>"test"</name>"
      <format type=\"webi\"/>
      <destination>
        <inbox>
         <to>userId1,userId2,userId3,groupId1,groupId12</to>
        </inbox>
      </destination>
    </schedule>
Regards
Stephane

An extension on the agent phone is shared with one or more other devices.

Try to configure a 7940 phone with CAD. When I try to log in as the agent I get this message "
"An extension on the agent phone is shared with one or more other devices. This configruation is not supported." I am not sure why I am getting this I have configured the phone the same as I have the others. Matched with 3 others phones that work perfect. Can anyone help to what is going wrong with this config?
Bob

Hi.
Yes you can configure Extension Mobility for those users so they can use any available IP Phone logon with cad.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080153e60.html#wp1037543
HTH
Regards
Carlo

SSIS - "Text was truncated or one or more characters had no match in the target code page"

Hello everyone,
SQL server 2012, SSIS package, we are getting the following error for some of the mapped columns,
"Text was truncated or one or more characters had no match in the target code page."
We're fetching the data from CSV file and dumping that to staging table i.e. SQL server 2012.
Can anybody please advise how to resolve this error/problem? It's urgent.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

You can enable data viewer (Right click on data flow connector --> Enable Data Viewer) before loading records to find out what's going on. Also, Configure error output to re-direct rows, so you can analyse data type and length.
Also, try this:
Ultimately, in the Advanced Editor of the source datafile, on the Input and Output Properties tab, under External Columns, there is a
Length property that defaults to 50. Changing that to match the Target Database File did the trick. [Source]
Check this links: Add a Data Viewer to a Data Flow
web: www.ronnierahman.com

"If this borrowed item was fulfilled with one or more...." message when I return library book

Similar Messages

Maybe you are looking for