If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?
If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?
At your end you will be using your WiFi signal. At the other end the iPhone would be using the 3G cellular signal. The cellular plan would need to be provisioned to allow FaceTime calls over cellular.
Similar Messages
-
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
-
I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. JenYou can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !! -
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this
I can call my ipad with my iphone alll the time. That's how I check up on my kids at home when I"m at work. You just set up to your iphone's facetime setting with your phone number and set up your ipad's facetime settings with your apple id (in this case it's your email)
-
My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there
If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591 -
Why does my Apple TV disconnect from the internet while Im watching Netflix? If I reboot my Apple TV, it seems to stay connected longer, but it still disconnnects me from my Wifi every 10 mins or so. I am not connected thru the eathernet cable.
If you try by Ethernet you can verify if the issue is with your WiFi network or if your appletv is defect as most users do not suffer as you do
-
I am trying to use FaceTime with my partner in Mexico but is not connecting. We do get the call, but it just does not connect. What should I do?
Try turning off the Firewall in System Preferences > Security & Privacy
Apple - Support - FaceTime -
hi i have an ipad 2 and i have made a password but have forgotten it and it has disabled it.what would be the best thing to do?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
thanks- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.
I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.
-
When I try to, the person on the other side can't hear me, and all I can hear are noises. But when I use apps like Viber or Facetime, I can make calls just fine! What may be the problem?
Did you fix the problem? I have the same problem and it has been pain in the neck.
-
How to blur the face of the person in the video using Adobe Premier Pro CS5
Hi
I have a video captured from a flipcam. I have Adobe Premier Pro CS5 and I don't have any knowledge of Adobe Premier Pro CS5 . Please can some one post a tutorial as how to blur the face of the person in the video using Adobe Master Collection CS5
Any help will be grateful .
ThanksYou are not really in the right place. I don't think you can edit video with Photoshop CS5, but Premier Pro CS5 can definitely do it. Off the top of my head, copy the video track on the timeline, (hold down the Alt/Opt key and drag).
Then Effects > Video Effects > Stylize > Mosaic.
Adjust number of blocks in Effects controls.
Then add Video effects > Keying > Four point matte
Adjust position of matte in effects controls.
If you want the matte to track with the video, move to start point on time line and adjust position. Move to end point and edit position. Matte will now move from one point to the other.
If you want more and better help, go to the Prem Pro forum. -
I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.
Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.
Maybe you are looking for
-
Can not open Build page in the visualstudio online
On attempt to open BUILD page error appears: TF50309: The following account does not have sufficient permissions to complete the operation: Kateryna Chistyakova. The following permissions are needed to perform this operation: View project-level infor
-
Certain part of screen stopped working
So one night I was texting and a certain part of the screen stopped working. The only way I can describe the part of the screen is by saying it is if you look at the regular texting screen, from the top of the spacebar and up to the top of the textin
-
Acrobat X will not convert Microsoft Word Starter docs to PDFs.
I am using Acrobat X with the latest updates on Windows 7 Home Premium. I have 177 separate files created with Windows Word Starter 2010. I want to merge all 177 files into a single PDF. I've tried merging the entire group of files. I've tried mergin
-
Connecting to Oracle Database 10g Express Edition
Hello guys, Im running Windows XP SP2. Ive just installed Oracle SQL Developer and Oracle Database 10g Express Edition. Im trying to connect via SQL Developer with: hr/hr (yes, ive unlocked this user) localhost:1521 sid:orcl but then it says: "Status
-
Hi, I would like to know about u201CData Masking". I have never heard of this term before. As per the little information, that I got, it seems to be related to - masking (conversion) of real production data to masked test data in order to run tests