If Wallaby can't help me right now, which Adobe product can?
I've built this website using Flash, and I'd like for it to work on iOS:
http://brianharkin.com/situated/
Each of the nine animation loops uses audio (so Wallaby is out).
Is there an application I can use to build these to work on iOS? After Effects? I'm assuming that Dreamweaver, even with its new HTML5 capabilities, doesn't handle animation and audio in this way. Any ideas?
Thanks.
While Wallaby doesn't support audio at this time, HTML5 does. So you could use Wallaby for the animation, export the audio from Flash Pro, and then add the audio to the Wallaby output manually.
There currently are no Adobe applications which would allow you to do content like this in HTML5. We hope to have audio in a future Wallaby release.
Note that Wallaby doesn't support video at this time. It wasn't clear if your content was actual video or animated stills.
Similar Messages
-
What does it mean when Siri keeps saying, "I can't help you right now, please try again later."?
Pretty much what it says, SIri can't help you right now. I suspect it's a location, nework and/or server issue. Siri is currently Beta and doesn't always work.
-
Which Adobe product can create a PDF that cannot be altered or printed by the recipient?
Which Adobe product can create a PDF that cannot be altered or printed by the recipient?
Hi quoman,
It sounds like you're asking how to add security to a PDF file. You'll need Acrobat Pro or Standard to do that. If you don't have Acrobat, you may try it for free for 30 days. See www.adobe.com/products/acrobat.html for more information.
Best,
Sara -
http://vimeo.com/44513538
Thanks a lot!By learning how to use After Effects. Here are just a few links to tutorials
http://blogs.adobe.com/aftereffects/2012/02/after-effects-basics-tutorials-by-andrew-devis .html FREE
http://www.lynda.com/member.aspx
http://www.crishdesign.com/books/Creating-Motion-Graphics/index.html
http://www.video2brain.com/en/after-effects-learn-by-video -
Which Adobe product can best isolate an object in a photo and elimanate all the background?
Wogdon,
Depending on the object, you may try to Image/Live Trace it (with suitable settings), or you may lock the image and draw a path round (and maybe one or more inside) the object with the Pen Tool. -
I have just update my iPhone 5 to iOS 7, everythings gone smooth, however, when I plug my phone to my desktop, window xp, I can only see the photos that I took this morning, over 2000 photos in my phone can not be seen right now, can anyone help?
Try to connect in recovery mode to restore, without using the latest backup, explained here:
iOS: Unable to update or restore -
From the past 3days,i can't install apps from the appstore,it says "this items can't be purchased right now,try again later", please help me,thank you
Hey Kay97,
These are some troubleshooting steps that might be relevant to your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
I dragged a copy of a photo onto my desktop from iPhoto, and it seems to be in some state of process/activity (vs. just being a copy of a photo on my desktop). I tried to delete/move to trash the photo, and I keep getting the following message: “DSC_0073.JPG” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
How do I delete this photo from my desktop?
Thanks!I ended up shutting down my system, and when I started it back up, I was able to drag the photo to the trash and delete it (I did get a message warning that my deleting the photo might negatively affect the application that was "using" it, but I deleted it anyway...it worked...and I'm hoping I didn't adversely affect another application!).
Thanks so much for your help! -
Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match. Can anyone help me with this? What file is missing and from where?
This is a known problem with Windows 7 Enterprise using certain Group Policy settings. Solution for me was to use another machine running Windows 7 Ultimate.
-
I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
“-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
Hope this will help other people who encounter similar problems in the future! -
I get error message "The message can't be sent right now. Please try again later."
I use the information protected by the Do Not forward template and I get error message "The message can't be sent right now. Please try again later."
My Details :
AD RMS Windows 2012 R2
Exchange 2013 CU3
I can't see any errors in the application event viewer
Help me please.Hi
I would recommend you to run Test-IRMConfiguration -Sender [email protected] and see the results as well.
Grant access to Exchange servers to use ADRMS for IRM. Perform the following task.
Open IIS on ADRMS server – open default Website – Click _wmcs – Select Certification
Switch to content view – right click on servercertification.asmx and click edit permissions ensure that Exchange servers are listed. If not add the exchange servers and the ADRMS managed account and grant editor access to them.
Also refer below
AD RMS: Test-IRMConfiguration Command Fails with UnsupportedCryptographicSetException
http://social.technet.microsoft.com/wiki/contents/articles/16449.ad-rms-test-irmconfiguration-command-fails-with-unsupportedcryptographicsetexception.aspx
Check if the certifications are set correctly - Set Permissions on the AD RMS Server Certification Pipeline
http://technet.microsoft.com/en-us/library/ee849850(WS.10).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
We just migrated over to Exchange 2013 and have a few issues. The main concern is users and their individual distribution lists didn't carry over correctly. I narrowed it down to the lists that users received via an email, then dragged-n-dropped
onto their Contact area. All other individual contacts and other lists can be viewed/edited, its just the ones that was copied via an email into their contacts. We get the message that "Your request can not be completed right now. Please
try again later." This is an important asset to be able to pass distribution lists from one user to another user (per department); but don't want to make the list a global list. These distribution lists can be seen if using the full outlook
version; but won't display in OWA.
Tech Girl 7Hi,
Is there any update on this thread?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Error: Your request can't be completed right now. Please try again later.
I have MS Exchange 2007 - 2013 CU3 coexistence at two sites connected by VPN link.
OWA and Outlook work fine for mailboxes on 2007 server. OWA does not work for mailboxes on 2013 server, however Outlook connects fine to any mailbox on 2013 server.
Here is what happens with OWA.
Users (Moved from 2007 or Created on 2013) can log in to OWA and see their mailbox folder structure and messages, but when they click on any email they get "Error: Your request can't be completed right now. Please try again later. " instead of
the message body. When they try to create a new message via OWA, GAL lookup does not seem to be working, everyone gets "Error:
The message can't be sent because at least one recipient isn't valid."
I can't see any errors in the application event viewer that get logged during OWA session.
HTTP Log has the following error codes: 241,242,302,401,403,405,500.
I am not sure at this point, but I think 405 is the HTTP error that can be associated with errors displayed in OWA
date 11/28/2013
time 18:01:02
s-ip 192.168.1.1
cs-method POST
cs-uri-stem /owa/service.svc
cs-uri-query action=GetConversationItems&UA=0
s-port 444
cs-username DOMAIN\chukcha
c-ip 192.168.1.113
cs(User-Agent) Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
cs(Referer)
https://EXCHANGE2013/owa/#path=/mail
Any suggestions on troubleshooting this problem?did some additional troubleshooting with network analyzer. the error message that gets logged in IIS logs is not what's being sent to the client.
[Client]
POST /owa/service.svc?action=GetConversationItems&UA=0 HTTP/1.1
Accept: */*
X-Requested-With: XMLHttpRequest
Action: GetConversationItems
Content-Type: application/json; charset=utf-8
X-OWA-CANARY: X-OWA-CANARY_cookie_is_null_or_empty
X-OWA-Attempt: 1
X-OWA-ActionId: -57
X-OWA-CorrelationId: 8515b843-9c69-4531-8674-f6b5e7809e9e_138566716478556
X-OWA-ClientBegin: 2013-11-28T19:32:44.785
Referer: https://EXCHANGE2013/owa/#path=/mail
Accept-Language: en-US
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
Host: EXCHANGE2013
Content-Length: 1303
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: X-BackEndCookie .....................REMOVED..........................
{"__type":"GetConversationItemsJsonRequest:#Exchange","Header":{"__type":"JsonRequestHeaders:#Exchange","RequestServerVersion":"Exchange2012","TimeZoneContext":{"__type":"TimeZoneContext:#Exchange","TimeZoneDefinition":{"__type":"TimeZoneDefinitionType:#Exchange","Id":"Eastern
Standard Time"}}},"Body":{"__type":"GetConversationItemsRequest:#Exchange","Conversations":[{"__type":"ConversationRequestType:#Exchange","ConversationId":{"__type":"ItemId:#Exchange","Id":"AAQkADg1MTViODQzLTljNjktNDUzMS04Njc0LWY2YjVlNzgwOWU5ZQAQAHZFTFsN5EeHqAKB00zcFrs="},"SyncState":""}],"ItemShape":{"__type":"ItemResponseShape:#Exchange","BaseShape":"IdOnly","FilterHtmlContent":true,"BlockExternalImagesIfSenderUntrusted":true,"AddBlankTargetToLinks":true,"ClientSupportsIrm":true,"InlineImageUrlTemplate":"data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAEALAAAAAABAAEAAAIBTAA7","MaximumBodySize":2097152,"InlineImageUrlOnLoadTemplate":"InlineImageLoader.GetLoader().Load(this)","InlineImageCustomDataTemplate":"{id}"},"ShapeName":"ItemPartUniqueBody","SortOrder":"DateOrderDescending","MaxItemsToReturn":20,"FoldersToIgnore":[{"__type":"FolderId:#Exchange","ChangeKey":"AQAAAA==","Id":"AAMkADg1MTViODQzLTljNjktNDUzMS04Njc0LWY2YjVlNzgwOWU5ZQAuAAAAAABFVn93oA4MSKtu0usRdmN7AQClJKxCwbCpQq7y7C/rPhKtAAABXjCJAAA="}]}}
[Server]
HTTP/1.1 500 Internal Server Error
Cache-Control: no-cache, no-store
Pragma: no-cache
Transfer-Encoding: chunked
Content-Type: text/html; charset=utf-8
Expires: -1
Server: Microsoft-IIS/8.5
request-id: 230bdffb-ae8f-4d6e-968f-8902b634cc36
X-CalculatedBETarget: EXCHANGE2013.DOMAIN.local
X-Content-Type-Options: nosniff
X-OWA-Version: 15.0.775.32
X-OWA-Error: Microsoft.Exchange.Data.Storage.TooManyObjectsOpenedException
X-OWA-CorrelationId: 8515b843-9c69-4531-8674-f6b5e7809e9e_138566716478556
X-OWA-ClientBegin: 2013-11-28T19:32:44.785
X-FrontEnd-Begin: 2013-11-28T14:32:44.781
X-BackEnd-Begin: 2013-11-28T14:32:44.784
X-FrontEnd-Handler-Begin: 2013-11-28T14:32:44.782
X-BackEnd-End: 2013-11-28T14:32:44.800
X-DiagInfo: EXCHANGE2013
X-BEServer: EXCHANGE2013
X-UA-Compatible: IE=EmulateIE7
X-AspNet-Version: 4.0.30319
Set-Cookie: UC=8c348df144034474a37cbc553448fd87; path=/; secure; HttpOnly
Set-Cookie: ...................REMOVED..........................
expires=Thu, 28-Nov-2013 19:42:44 GMT; path=/owa; HttpOnly
X-FrontEnd-End: 2013-11-28T14:32:44.801
X-Powered-By: ASP.NET
X-FEServer: EXCHANGE2013
Date: Thu, 28 Nov 2013 19:32:44 GMT
3f
A problem occurred while you were trying to use your mailbox.
0 -
Error: Your request can't be completed right now. Please try again late
More of One of our user is unable to see the email body. When clicking on a mail the error are getting is Error: Your request can't be completed right now. Please try again later.
I have tried it in different browsers still no success.
ThanksHi,
I would ask the same question, does this issue occur in the browser or in Outlook client? If it occurs in different browsers, it's not an Outlook issue, then I would suggest you post the question in Exchange forum to get more specific support:
http://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Or Exchange Online:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I am in Europe right now traveling and I can not get emails it's said can not connet to server
I am in Europe right now traveling and I can not get emails it's said can not connet to server It's a iCloud problem? What do I do
If you're sure you want to pay for this (it may be expensive!), go to Settings > Network and turn on Data Roaming.
Maybe you are looking for
-
How can I display only the Data Logging pull down menu on my LV front panel?
Is it possible to hide all unused pull down menu on my front panel vi like File, Edit, View etc.. and only display the pull down menu for the Data logging?! best regards Norick
-
I recently changed my password to the email account, but somehow I delete the account and try to add it with my new password, it just doesn't work. What should I do? Thank you
-
Pages spell check and Mac dictionary
I find it annoying that Pages' spell-check is not synchronized with Mac Dictionary/Thesaurus. There are words I type that are shown as misspelled, but exist in the Dictionary program. Why not sync the two? It's annoying how many legitimate words Page
-
WebCenter Form Recognition WebVerifier directory name {Directory Path} is Invalid
Hi I'm facing the below issue while trying to open the Web Center Form Verifier using web Verifier. The WebVerifier directory name {Directory Path} is Invalid. please contact your system administrator. OS : Window Server 2008 R2 Software: Oracle WebC
-
So after i use my iphone and set it down, it shuts down like when my phone is out of battery when i am at like 90%. Then i gotta plug it in and it will turn on but then i have no phone signal. So then i reset it and its fine. Then it happens again. P