If WBS element deleted expenses entries will show

Hi Gurus,
In my office one Project is deleted and new project is created with all WBS element.  Before that new project creation some expenses are booked in old project now we have to delete all the expenses enteries which are all accounted in old project.
I have one doubt if we pass JV for the expenses enteries
Expenses A/C Dr. (New project)
To Expenses A/C Cr. (Old Project)
if we deleted the old project that expenses entry will show or it also deleted.
or how we can over come is issue.
Any suggestions or advice welcome its u r g e n t
thanks in advance
jaya

Hi sridhar,
Thanks you for your replay,
If the Project is locked we can pass transfer enteries or we have to unlock it and pass entries and again lock it.
Can you please advice me
Thanks
jaya

Similar Messages

  • WBS ELEMENT DELETED EVEN AFTER EXPENDITURE BOOKED

    Hi Dear
    I am facing a problem please help me out
    the pb is one of my End user created a WBS element then budgeted & Parked an Invoice through FV50 screen using the Cost Center as well.
    1)After parking the Document through FV50 screen the Wbs element deleted,
    2)now deleting the park document is not possible ,
    3)that require Wbs elem when i try to create the same wbs the system gives the message "  WBS ELEMENT IS ALREADY EXIST "
    4) WHEN I want to display the WBS THE SYSTEM message is wbs element is not Exist"
    please help me out in this problem ........ in the following way
    a) either to delete the wbs element
    b) or to create the deleted wbs ,

    Hi sridhar,
    Thanks you for your replay,
    If the Project is locked we can pass transfer enteries or we have to unlock it and pass entries and again lock it.
    Can you please advice me
    Thanks
    jaya

  • Table name for WBS element deleted

    If a  WBS element is deleted , the corresponding object id which is internally created by the system is also deleted from the PRPS table,
    Is there a way to find all the deleted WBS elements and what is the table name for the same.

    Hello
    1. Goto table PRPS with PSPNR = WBS number. Get field OBJNR.
    2. With PRPS-OBJNR goto table JEST. You will have all status for this WBS element.
    3. Text for status - table TJ02T

  • WBS elements deletion

    I deleted some of the WBS elements a week ago.
    Now I still see them under the search list,
    Is it because they are marked for deletion and not deleted actually,
    If yes what should I do to remove them.
    Please reply.

    Hi Ramesh,
    The scene is like this.
    End users created WBS elements starting with H.****
    Then after I assigned project code H for tht co.code.
    after applying project coding mask [OPSJ] those WBS elements automatically got deleted, I m not sure if they are deleted or not but when i go to CJ02 and enter that WBS it says it does not exists. but it still shows those WBS elements under ths search criteria.
    I reffered to OSS notes as per it they have corrected this problem in version I am using.
    Please guide if you have any idea.
    MIlind

  • Cost element deletion-COEP entries deletion originated from Spl purpse ledg

    Hi Folks,
    We have created RA GL account by mistake as cost element and some entries have already gone into table COEP table. To delete cost element the prerequisite is that cost element shouldn't contain any entries. We have deleted COEP entries by using program "RKACOR20 : to delete CO documents for the GL doc and its reversal document" generated from FI, but unable to delete one entry which has got originated from Special purpose ledger. Can any one suggest way to delete this entry from COEP table.
    Thanks in advance.
    Thanks
    Rajesh Angadala

    Hi
    Check the below program, may be it works :
    Function Module: K_OBJECT_DATA_DELETE
    Program :
    RGUREP03                       FI-SL: Delete Line Items and Correct Totals Reco
    MGCU3TOP                       FI-SL: Delete Transaction Data
    SAPMGCU3                       FI-SL: Delete Transaction Data
    SKS

  • How to change WBS Element in FI Entry for Asset

    Hi all,
    I have a scenario where an asset has been capitalized with  WBS element 1. After several months we realized that it has to go to WBS element 2.
    We update the Asset Master Data with a new WBS Element 2.
    Depreciation from this date onwards is posted to WBS Element 2 (this is expected), but in FI the asset acquisition cost is still in WBS element 1.
    Does anyone know how to rectify the FI document with correct WBS element i.e  WBS Element 2
    Any advice would be greatly appreciated
    Regards
    Pramod Saraswat

    Hi Pramod,
    In posted document you cant change the WBS element.
    In order to post on WBS 2 , you have to reverse the acquisation entry posted on WBS1. Then update correct one in  asset master then post acquisation.
    Ravi

  • WBS element deletion after project release

    Hi,
    getiing an error ,scenario is after deletion of WBS element  if i try to add same wbs..throwing an error that WBS element XYZ version RELEASED already exists.
    thanks

    Hi,
    You can refer this thread for more details;
    Re: Restoration of original WBS code
    Regards,
    Kabir

  • No more than 6 entries will show on my site.

    I had a year long blog with an older version of iWeb, but this version is not displaying anymore than 6 entries at a time in Safari.
    I tried duplicating the entry and deleting the old #7, but it cuts off the bottom entry on the list leaving only six entries showing. Help!
    I started this site as a homeowners discussion group and now I'm limited to topics we can argue over;-)

    I went to the directions you gave me.
    By default, there is no limit listed. I was not able to change to any number (it is grayed out).
    II did go to the MobileMe chat and had the following session. (It didn't solve the problem).
    Thanks for the reply!
    Chat Transcript
    info: queue_cmd:1:1:17
    info: Hi, my name is Jake S. Welcome to Apple!
    Jake S: Hi Paul
    Paul Yeiter: Hi Jake, did you get my problem?
    Jake S: I show you are unable to publish more than 6 pages now with iWeb correct?
    Paul Yeiter: Yes, 6 blog entries.
    Jake S: 6 blog entries...I see....I'll pull the account up quickly and see what we can find out Paul
    Paul Yeiter: thanks
    Jake S: I'm sorry for the delay. I'll be right with you.
    Paul Yeiter: OK
    Jake S: When was the last time that you were able to publish correctly Paul?
    Paul Yeiter: I'm not sure when it dropped off the last entry. Maybe a moth ago.
    Paul Yeiter: I've used earlier versions of iweb to journal for a year with no problems.
    Paul Yeiter: Can you see old enties?
    Jake S: Are you currently on iWeb 09 or 08?
    Paul Yeiter: 08
    Jake S: Unable to see any previous entries...only the 6
    Paul Yeiter: there should be a Miscellaneous one as well
    Jake S: In archives I see that too yes
    Paul Yeiter: Before today, I combined Kudos with Misc. to keep it @ 6 show things would show
    Jake S: I'll see how we can get this corrected Paul
    Paul Yeiter: OK
    Jake S: If you publish to a folder will it show any updated information?
    Paul Yeiter: I haven't tried that.
    Jake S: I'll also setup a test account for you to publish to so we can see how it reacts there as well
    Jake S: If it publishes the same way to a test account there would be something within iWeb that would need to be addressed with the iApps team but if it shows new information, we should be able to republish that to the main pyeiter account and have it come up normally too
    Paul Yeiter: what would you like me to do?
    Jake S: Quit iWeb, sign out of mobileme in system preferences and then sign in again with this username and password please
    Jake S: username mmtesting________
    Jake S: password apple______
    Jake S: then open iWeb again and Publish All To Mobileme
    Paul Yeiter: OK
    Jake S: let me know once it completes and we'll check it out
    Paul Yeiter: It's publishing, but could take a while
    Jake S: Any approximate estimate?
    Paul Yeiter: No, just working in the background.
    Jake S: just from prior publishing that is...a guesstimate from you?
    Paul Yeiter: 4 minutes?
    Jake S: No worries then....I'll stand by
    Paul Yeiter: Jake,
    Paul Yeiter: While we're waiting.
    Jake S: sure?
    Paul Yeiter: Is it possible to recover an iweb blog I kept 2.5 years ago? When I upgraded computers, I lost it. It was an account of my wife's fight with cancer. I was hoping to keep it as a record or publish it in an iBook.
    Jake S: As far as I know, if its in the domain file from the page it should be recoverable....that may be a question better suited for the iApps team with Apple Care....they support iWeb to a much fuller capacity than we do here in chat.....
    Jake S: We can help with any publishing type issues but as far *** restoring any previous versions, they would be better to ask...sorry I dont have a better answer for you there Paul
    Jake S: as far AS restoring....sorry bout that too
    Jake S: spell check wont catch everything
    Jake S: If we run into the same blog issues with the test me account that you see in the main pyeiter account, I'll recommend you speak with them as well to see if they can help figure out why iWeb wont publish more than 6 entries
    Paul Yeiter: "if its in the domain file from the page it should be recoverable" What does that mean?
    Jake S: 1-800-APL-CARE (1-800-275-2273) and there is the number just for future use Paul
    Jake S: the single domain file encapsulates all the iweb sites and pages that you currently publish
    Jake S: If the other blog kept from 2 years ago is still in a domain file somewhere, it should be recoverable
    Jake S: so by changing versions or upgrading operating systems, it may or may not be able to be recovered....Im not certain...thats why I would recommend speaking with iApps about that one
    Paul Yeiter: Do I need an AppleCare account to access the above number?
    Jake S: The support is with apple care warranty coverage yes...but they will also bill per incident if no warranty is current
    Jake S: I think Mobileme is the only support included with the annual service price and needs no apple care warranty
    Paul Yeiter: I just got an iWeb notice of a "Publish Error
    Jake S: Looks like the page is done....what is the error?
    Paul Yeiter: An error occured while publishing file"/web/.Temporary Web Resources/88BF123E-3025-4620-A343-153E12737CB9
    Paul Yeiter: Try publishing again later
    Jake S: It looks like a keychain error....not critical...it published the page....it can be rectified by resetting the router or even repairing permissions to the mac startup disk
    Jake S: but what does stand out is the same 6 entries....now on the page have you limited it to 6? If not how many more entries should be shown?
    Paul Yeiter: There are 7 entries in iWeb (at this time)
    Jake S: the difference I see off hand is the comments on the Annual Meetings are not present in the test mobileme account
    Jake S: So from here, this is what I recommend Paul....go ahead and quit iWeb again
    Jake S: then in system preferences>mobileme sign in as pyeiter again
    Jake S: then open Finder and go into Applications>Utilities and open Disk Utility
    Jake S: Click on the mac hd on the left side, run the repair permissions option and once its done reboot the mac....
    Jake S: After rebooting, go into iWeb and select the Publish All to Mobileme option again and see if the 7th entry shows up as well as making sure there is no publishing error
    Jake S: Im not sure if the problem lies in the page, the application or the keychain but since the error only presented itself in a test account, I would say the keychain would be fine
    Jake S: something else that I would recommend, while we are still in chat, is to publish to a folder as well and see if the new entry shows....
    Jake S: that can help isolate where the breakdown is as well...shouldnt take as long to publish to a folder as it does to the account
    Paul Yeiter: I guess this is goodbye. If it doesn't work... should I call the Apple Care #?
    Jake S: Yes...another thing that comes to mind would be to sort of flush out iweb....create a simple test page, move it to the first site on the left side and publish...once its shown correctly, delete it and with the main site in the first site position, publish again
    Jake S: so there are a few options to go with but ultimately if none of the blog entries are updating, apple care would be the next point of contact
    Paul Yeiter: "move it to the first site on the left" ?
    Jake S: correct...on the left where you see Site and then pages under it....if you create a new site it would be 2nd on the list....just drag it above the main site so it is in the first position
    Paul Yeiter: OK. Thanks for your time and expertise!
    Jake S: I sure hope it helps Paul
    Jake S: Have a great weekend and take care!
    Jake S: Thank you for chatting with us. We value your feedback. Please click the blue "Close" button at top left to answer a few questions about your experience with us today.
    info: Thank you for chatting with us. Please click the blue "Close" button on the top left of the chat window to tell us how we did tod

  • Can I link folders in the Bookmarks Menu and the Bookmarks Toolbar so that an addition or deletion from one will show up in the other?

    It seems as if these two lists - the Toolbar list and the Menu list - operate independently. Is that correct? I'm using Windows 7.

    Immediately backup your whole Firefox profile.
    * [[Back up and restore information in Firefox profiles]]
    You will have over written your bookmarks database and it may be difficult to recover. You may at least have backups of bookmarks that are still usable but that is why you must back up the profile.
    Create a new additional test profile using the profile manager. Next test the bookmarks from your backup restoring them into Firefox whilst open with and using the new test profile. If one of those backups works you should be able to restore that into your ordinary Firefox profile.
    You may need to delete the database places.sqlite to get working bookmarks. But rename it rather than delete it as it is then easier to reverse. Note if you do need to delete the places database you will lose your Firefox History.
    There is an alternative strategy but again ensue the profile is backedup. And in this case also backup separately places.sqlite before any recovery attempt.
    The Windows OS should try to keep previous copies of Files and it is possible that you will have a usable previous copy of ''places.sqlite'' that may be recovered by options available from right clicking the current version.
    Related articles
    * [[Use the Profile Manager to create and remove Firefox profiles#w_creating-a-profile]]_creating-a-profile
    *[[Recover lost or missing Bookmarks]]
    *[[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile]]_how-do-i-find-my-profile
    * http://kb.mozillazine.org/Places.sqlite
    * These articles mentions the last resort deleting places.sqlite to restore bookmarks, BUT you lose history AND need a correct backup file '''within the profile''' for Firefox to utilise <br /> http://kb.mozillazine.org/Lost_bookmarks#Restoring_bookmarks_in_Firefox_3_and_above <br /> http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database

  • Extract in a file all deleted PROJECTS and WBS element

    hello everyone,
    i need  to create a file wich contain all projects and wbs element  deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
    please help.
    thank you.

    hello everyone,
    i need  to create a file wich contain all projects and wbs element  deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
    please help.
    thank you.

  • Settlement fo Wbs element to Copa

    Hi All,
    Iam new to project systems concept. In month end when we settle wbs element to copa.data will flow into F!, profit center and copa, during the settlement to copa
    I want to know what journal entries it will reflect in FI,Profit center and Copa.
    Regards,
    Chandu

    Dear,
             For customer project you should run the result anlaysis and this result anlaysis data you can settle to the COPA.
                                 Then the settled data send to the value field which is given to the PA transfer strature in Settlement profile.
                                              The profit center is debited and credited .
                                               One controlling document is also generated which have cost reduced from WBS element to profibility segement.
    Regards.

  • Calendar entry not showing up in Today theme

    For some reason, all of a sudden, my calendar entries are not showing up in the Today theme. I don't know if this has anything to do with it, but I had to change my yahoo email address because someone hacked into my emails. So I reset my password and now everything seems to be messed up.
    I already updated my email in my phone - new password and all. I did notice that when I select Options in my calendar, it says Device Default (which is where my calendar entries are) and then 2 of my email addresses - one of which being the one where I had to reset my password.
    Reading other posts, I went into Advanced options - Service Books and deleted my yahoo [CICAL] book. Now, it's not giving me the option to select my yahoo account as my default calendar entry.
    Does this all make sense?? How do I add back that service book that I deleted? How do I get my calendar entries to show up in the Today theme?
    Any input will help.
    Thanks!

    Ok. So to make things clearer....
    I was able to undelete the yahoo [CICAL] service book so now both my emails are back into play.
    After reading some more posts, this is the problem I'm having (sorry if I'm repeating stuff from my previous comment, I just wasn't sure if I made sense).
    Issues:
    * In the Today theme, my calendar entries are not showing up on the home screen
    * It looks like all my calendar entries went to the "Device Default" calendar setting
    * If I enter a new calendar entry, it says it's using my yahoo email address (which is what it was doing before) and now that entry will show up
    * However, ALL my calendar entries are under the "Device Default" so it would take forever to re input all my calendar entries so that it's posting under my Yahoo account
    Any suggestions on what I should do? Is the only option to just wipe my entire calendar and reinput everything?
    Thanks!

  • Fetch Top level WBS elements for delivery type LP

    Hi everyone,
    we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
    How we are doing?
    so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
    Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
    Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
    So it is going through so many iteration to fetch the UP value again and again until it is initial.
    What we need?
    So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

    Hi,
    Try FM
    'BBP_PS_PROJECT_GET_LIST
    'BAPI_PROJECT_GETINFO

  • FBL1n - WBS Element

    Hi All,
    My client needs report for payment made and balance against WBS Elements.
    My process is PR>PO>SES>MIRO>Payment to Vendor.
    I tried FBL1n , after adding WBS elements (field selection) the values are blank.
    What is the reason for values coming blank?
    I am not using cash flow and dont want.
    Actually MIRO is account assigned to WBS Elements through Service Entry Sheet. So logically when i am making payment through F-53 against MIRO,the values should appear in WBS element in FBL1n
    Please suggest.
    Regards,
    Pravin

    if you are using Funds Management then you can find the in FM line item report.
    I doubt you can find in FBL1n, but i think in MM have report on vendor payment history and you can include additional fileds there, not sure on report name.
    You assign WBS to cost elements,  was wondering whether you can list WBS for B/s items.
    Thanks,
    Chanru

  • Appropriation Request Plan Info Copy to WBS Element

    Hi,
    I understand that the Plan information specified in Appropriation Request will be copied into WBS elements specified in Measures/Assets section.
    I would like to confirm if this happens for both cases below:
    - If I put exisitng WBS element under Measures/Assets section (will this overwrite my original plan for WBS element?)
    - if I create a new project via Appropriation request, will the plan of the AR be copied to my WBS element (which means I will see updated plan if I check CJ40)?
    Thanks!
    Regards,
    Vivian

    Please check the below specified link, which is very much similar to u r requirement
    http://help.sap.com/saphelp_46C/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.htm
    Regards
    Suresh

Maybe you are looking for