If we switch from Time Warner to AT&T, our e-mail address(es) will also change. How will this affect our use of Firefox? Will we have to re-register?

We intend to rid ourselves of anything TimeWarner. AT&T will probably be our next stop.
If our e-mail addresses change, do we have to re-register with all things "Firefox"?
What changes should we prepare to handle?

If you have e-mail thru Time Warner servers, they may be shut down if you
cancel them. Check with them to be sure.<BR><BR>
If your e-mail changes, you should go to '''every site''' that has your profile and
change the e-mail they have on record.<BR><BR>
While using the e-mail service of a provider is good to have, what happens
when you no longer use that provider? A good thing to do is to check out
and of the '''free e-mail providers''' that are around. With them, you don't have
to worry about keeping a provider just for the mail box.

Similar Messages

  • Safari works but Firefox takes forever to load yahoo and youtube after switching to Time Warner.

    Strange. Safari works just fine, but as soon as I switched to Time Warner, Firefox now takes almost a minute to load certain pages such as Yahoo, Youtube and google.
    I have a Macbook Pro. I've rebooted the modem, Uninstalled and reinstalled Firefox while cleaning out the the folders. I've tried safe mode but still the delay.
    I changed my DNS server to the OPENDNS servers.
    Help.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Click the menu button [[Image:New Fx Menu]], choose History, and then "Clear Recent History...".
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the "Clear Now" button.
    Further information can be found in the [[Delete browsing, search and download history on Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • TS1398 The WEP password to access WiFI from Time Warner is 12 numbers and letters plus 14 zeros.  Can I expand the available space in the space for entering passwords

    The WEP Password to access wifi from Time Warner cable is 12 numbers and letters followed by 14zeros.  The available space to input password is unequal to the task?  Time Warner advised to call Apple.  Any one with a suggestion on how to either 'customize' WEP or expand available password input space?  Better ideaS?

    wjosten - I was using a WEP password of greater than 13 characters with no problem.
    Mondayblues - Are you saying that you cannot set your own password for your router/modem? You should be able to access it from an ethernet connected computer and change the password to suit yourself.  If it's not more than about 4 years old, you should be able to use WPA instead of WEP, which is much more secure.  Google "time warner modem  yourmodel" to find the user manual and the URL to access the modem.

  • My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    Sounds like your friend didn't disable iMessage on his/her iphone before switching.  Have your friend do the following:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "edit products"
    Click on the "x" to the right of his/her old iPhone.
    Click "unregister"
    This should unregister it with the iMessage server, which will allow you to send texts as normal SMS.
    On your iPhone make sure you have Settings>Messages>Send As SMS set to ON.

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

    I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

    cor-el,
    Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

  • When i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

    when i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

    Same problem here.  Whats the deal?!  Apple??

  • My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ?

    My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.

    shahzadfromlahore wrote:
    Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
    Who set up the phone? Who's Apple ID was used to activate it?

  • Can I use my WRT54G as a DHCP server only? I've got 5 dynamic IP's from Time Warner..

    Hi everyone, I'm wondering if I can use my WRT54G as a DHCP server only only my network, without having to have any of my PC's plugged into it's router ports?  I looked at the settings but I couldn't get it to work.
    Here's why:  I just got Time Warner Business Class cable internet which comes with 5 dynamic IP's.  I want each computer, well 4 of them at least and 1 for the WRT54G, to have a unique IP when accessing the internet, and the other computers (5 more computers) to use the DHCP server in the WRT54G to get a NAT IP for use on the internet.
    We play Diablo II on the internet and only 4 computers can be connected through 1 IP, so that limits us in my current configuration.
    Current Equipment: One WRT54G, one Netgear GS116 16 port gigabit non-managed switch.  One Time Warner Cable modem.  Also attached to the network is one HP network printer, a Buffalo LinkStation NAS and a Zensonic Network DVD player.
    Current config:  Cable modem -->  WRT54G --> Netgear switch.
    Ideal config: Cable modem -->  Netgear switch -->  WRT54G.
    With my current config, I am not taking advantage of the 5 dynamic IP's, but all the computers connected to the Netgear switch or the WRT54G can connect to the internet and the NAS. 
    So my ideal config (where I don't have to buy anything and where all the computers can print and access the NAS) is to connect all the computers and devices to the Netgear Switch and somehow force 4 of the computers and the WRT54G to get a dynamic IP from the cable modem, while the other computers and devices use the DHCP server on the WRT54G to get to the internet. 
    Is this possible?
    I called Time Warner Cable and they weren't any help.  I called the Linksys sales department and they weren't of much help either. 
    I suppose that I could purchase a new 8 port switch and attach 4 computers, the cable modem and the WRT54G to it.  Then attach the Netgear to the WRT54G to accomodate the printer, NAS, and the other 5 computers.  But in that senario, the 4  computers connected to the new switch can't print and can't reach the NAS.  And geez, some computers would have to go through 3 devices to reach the internet, which has got to slow them down.
    I did read about the Linksys EFG120 which has a DHCP server, but at $400 and only 120 gigs, it doesn't work for me. 
    I called Time Warner and the cost of more dynamic IP's is prohibitive, I'm already paying $79 a month for this internet and they want another $50 a month for 7 more dynamic IP's and that wouldn't help my NAS or my printer.
    The cost of a 16 port gigabit switch with DHCP is an amazing $800 or so, which is out of the question. 
    Sorry for being so long winded and thanks for reading this far.  I'm looking forward to any replies. 

    That is a hell of a setup. I don't know if it would be easier and cheaper to either buy a real router like a Cisco, get fixed IP addresses and a RV042, or buy 4 network cards for the four of the five computers which need the internet access for gaming.
    O.K. First your setup:
    1. You wire the modem to the 6-port switch.
    2. You connect the remaining 5 ports with the WAN ports of 5 WRTs with DHCP on the WAN interface.
    3. You configure each WRT with unique LAN IP addresses in the same subnet, e.g. 192.168.1.1/255.255.255.0, 192.168.1.2, 192.168.1.3, 192.168.1.4, 192.168.1.5.
    4. You turn off all DHCP servers except on one, e.g. 192.168.1.1. That router will be the default router and internet connection for any client which gets dynamic LAN addresses (as fallback or guests, I would not configure the NAS or printer with DHCP addresses if you have everything else on static IP addresses). You can certainly disable all DHCP servers if you want, too.
    5. Now you connect all WRTs with each other.
    5a. You connect port 1 of the 1st WRT with port 1 of the 2nd.
    You connect port 2 of the 2nd with port 1 of the 3rd.
    Port 2 of the 3rd with port 1 of the 4th.
    Port 2 of the 4th with port 1 of the 5th.
    (Do not create a loop connecting port 2 of the 5th with port 2 of the 1st!!)
    5b. You buy another switch and connect each port 1 of each router with this switch. This has the advantage that you don't have a long cascade between the 1st and the 5th router like in 5a.
    6. You connect all devices to the LAN.
    6a. If you did 5a, you will probably put each computer to the router which internet connection it uses. The NAS and printer could go anywhere.
    6b. If you did 5b, you hopefully bought a 16 or 24 port switch. Then you plug simply everything into that switch. Otherwise you can certainly use the free ports of the WRTs like in 6a.
    7. You configure all your devices with static IP addresses. For instance,
    IP 192.168.1.11
    netmask 255.255.255.0
    gateway 192.168.1.1
    For the DNS servers I would highly recommend to use the DNS servers of your ISP directly and not use the relay on 192.168.1.1.
    The gateway address defines through which router the computer connects to the internet.
    8. You may still have to configure port forwardings on the router to the game computer if required for the game.
    An interesting alternative to this setup might be to buy 4/5 network cards for the 4/5 computers with direct internet access. Then you use the one network card to connect to your single LAN behind your single WRT. The other network card goes into the switch behind the modem and has direct internet access. You then have to tell Windows which of the network cards has the default gateway for the internet connection (to prevent routing all traffic through the LAN and the WRT to the internet). One game computer would have to be behind the WRT.

  • I'm having trouble with "maps" on Macbook Pro, iPad and iPhone.  It shows my current location and hour away from where I am.  As soon as a move iPhone away from my wifi at home to cellular it shows my correct location.  No help from Time Warner.

    What can I do to get "maps" to work on my Macbook Pro, iPad and iPhone when connected to wifi at home.  iPhone "maps" work fine when connected to cellular service. Maps on wifi shows me about 55 minutes away from my current location.  Very frustrating.  I called Time Warne,r my service provider, but they had no answers since they were not knowledgeable of this situation.  Anyone else having problem?  I just updated all devices to newest update.  Is that the problem.

    Did you bring your wireless router with you? If so, it's possible the iPad is getting its location through the router and the router still "thinks" it's where you used to live.
    Try taking your iPad to another location where there is wifi (such as a coffee shop). Then, try an app that uses location services. If it's accurate at another location, then the source of your problem is your router.
    ~Lyssa

  • Apple E-mail users aren't receiving E-mail from Time-Warner (Road Runner) customers

    I can't find any appropriate place to report this on Apple's site.  After a couple of friends suddenly didn't receive my E-mails, I noticed that they're both using me.com or mac.com addresses.  Everyone else gets my messages fine.
    Turns out that Time-Warner cable customers (at least in southern California) can't send E-mail to me.com or mac.com addresses right now.  And any attempt to report the problem there is met with extreme ignorance of how E-mail works.  I escalated the problem as far as they could (ooh, "level 3" technician) and didn't talk to a single person who understood E-mail servers at even a basic level.
    Turns out that this isn't even a new problem.  It has afflicted customers in other parts of the country before: http://9to5mac.com/2011/12/07/emails-from-roadrunner-and-comcast-not-playing-nic e-with-apples-servers
    Anybody notice this, or know where we're supposed to report it?

    I live in Wisconsin and am experiencing the same issue.  I have friends using Roadrunner in Green Bay and Milwaukee who send messages to my me.com account which I never receive.  They get the following bounce back message:
    From: Mail Administrator [mailto:[email protected]]
    Sent: Wednesday, January 30, 2008 4:24 PM
    To: Customer Email Address Goes Here
    Subject: Mail System Delivery Report
    As part of the delivery process, your message was relayed to a machine which does not handle delivery status notifications. As a result, it is not possible to determine whether the message will get to its final destination. Please reply to <[email protected]> if you feel this message to be in error.
    A likely cause of this message is that you sent a message to someone and you had "Receipt Requested" turned on, hoping to get an acknowledgement that your recipient received the message in question. Receipts such as this are also called "Delivery Status Notifications", and some mail systems are configured to not send receipts, due to local policy implemented there. What this message is telling you is that you sent a message with receipt requested to a site that does not provide such receipts.
    No solution at this point.

  • Unable to reach POP server from Time Warner cable

    For over a week, I have been unable to access my email server using my home Time Warner cable through outlook. My settings have not changed and I can access webmail. Has anyone had this problem and has anyone been able to find a solution?
    Solved!
    Go to Solution.

    It is definitely a Verizon problem. You must reach someone in technical support and have them send a trouble ticket to the email server department. they need to release the IP address from any restrictions. This is what I did, and it was fixed in 24 hours. You must tell them your IP address.

  • Apple bars email from Time Warner servers

    Recently I discovered that email sent from my iMac’s RoadRunner address ([email protected]) to the me.com and icloud.com addresses on my iOS devices is not being received, so I asked Time Warner about it. Today I received this reply:
    “We are aware that Apple is blocking one of our outbound mail
    server IP addresses, and we are engaging Apple regarding the
    matter.  We trust that they will unblock the server just as soon
    as they see fit to do so.”
    I would like to know why Apple is blocking email sent to me via RoadRunner, and I want Apple to stop doing it.

    I live in Wisconsin and am experiencing the same issue.  I have friends using Roadrunner in Green Bay and Milwaukee who send messages to my me.com account which I never receive.  They get the following bounce back message:
    From: Mail Administrator [mailto:[email protected]]
    Sent: Wednesday, January 30, 2008 4:24 PM
    To: Customer Email Address Goes Here
    Subject: Mail System Delivery Report
    As part of the delivery process, your message was relayed to a machine which does not handle delivery status notifications. As a result, it is not possible to determine whether the message will get to its final destination. Please reply to <[email protected]> if you feel this message to be in error.
    A likely cause of this message is that you sent a message to someone and you had "Receipt Requested" turned on, hoping to get an acknowledgement that your recipient received the message in question. Receipts such as this are also called "Delivery Status Notifications", and some mail systems are configured to not send receipts, due to local policy implemented there. What this message is telling you is that you sent a message with receipt requested to a site that does not provide such receipts.
    No solution at this point.

  • HT204053 can I purchase from two different stores ie store in New Zealand and Store in Australia and  how do I sync updates on applications?  Do I have to switch ID's in my settings each time or is there an easier way.

    can I purchase from two different stores ie store in New Zealand and Store in Australia and  how do I sync updates on applications purchased from either store?  Do I have to switch ID's in my settings each time or is there an easier way.  The trouble is I set up my appleid in new Zealand and so all icloud and itunes and app stores are under New Zealand Apple ID I have since moved to Australia. Im a real beginner at this stuff so bare with me pse.

    I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job).  What I think we need is the Education Volume Purchasing Program
    http://www.apple.com/education/volume-purchase-program/faq.html
    Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software.  (The AppStore icons still show as needing the updates, and the version info reports the old version.)  The documentation is also vague about which AppleID to use in which circumstance.  I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers.  When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install.  We did!  But they appear to have no way to enforce it.
    So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

  • I just switched from pc and want to get printer drivers to work with macbook air.  How do I do that?

    I just switched from pc and want to get my HP all in one printer to work with macbook air.  Is it just as simple as downloading drivers from HP?

    Turn the printer on and plug the printer into the MBA and your mac should install the printer for you (usually any necessary drivers too).  I had a printer I used on a pc and I plugged it into my macs usb port and my mac automatically recognized it and took care of everything for me.  If you do this and it wont print, then yes go to the HP website the install latest drivers for 10.7
    Also, as a new mac user you should find these articles helpful:
    http://www.apple.com/support/switch101/
    http://www.apple.com/support/mac101/
    http://support.apple.com/kb/HT2477
    http://support.apple.com/kb/HT1343

Maybe you are looking for

  • Problem with shared HP930C printer on home network

    We have 2 networked computers at home -- one is Windows XP with an HP930C printer attached, the other is Windows Vista 32-bit with a Canon iP3600 attached.  Both printers are shared across the network.  Both computers will print to the Canon printer.

  • Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control

    i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,, i have now this drivers : h

  • Why does my wifi disconnect after a minute or so of non-use?

    I have noticed that if I am stopped on a website (reading etc) and then I try to go somewhere new, my connection (although appearing to be completely working and full) is gone. The loading bar only moves out and inch and then stops, and I am forced t

  • I can't view or edit my photos after Update

    My photos are visible in the row of thumbnails along the bottom of the screen but the main editing field is black. I just recently ran Update, so is that the problem although it was working fine last night?

  • Can offset presses actually do 1% increments of C or M or Y?

    When trying to achieve very bright colors, with no black, is it valid to move the other components in 1% increments: for example, 100*5*1*0? Or is that expecting a level of precision that is more than the press can actually deliver. Years ago I worke