If we want to transfer data to multiple receiver using context object, how

If we want to transfer data to multiple receiver using context object, how many receiver determinations we need to create?

Hi Chiru,
Just go thro' the below links for sending data to multiple receivers:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Conditions in Receiver Determination
I hope this helps.
Regards.
Praveen

Similar Messages

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

How to transfer data between spreadsheets without using Business Objects?

Hello, every time I try and log onto the business objects platform I keep getting "this system can be contacted but there is no central management server running at port 6400". All I need to do is pass variables between spreadsheets. Both files are located in the same folder. Below are the links ive tried but have been unsuccessful to pass data.
(This link I used the swf loader component child and flash variables task Daya posted on Feb 15. However nothing loaded. The link wasnt a link i could display is in a browser. So i kept getting 0% when in preview mode.
Passing values from dashboard to dashboard with Flash Variables
Next I tried the following link. I did everything word for word and was able to display both files on the html page, but no link or connection between them existed. I would select a state and noting happened to the other swf files chart. Does this need to be in the Business Objects platform?
Dashboards 4.0: Connect to an external
Lastly , I used the link below. I followed everything and was able to get interaction from the parent to child however with only the files that were available on this thread. Their URL was this http://myxcelsius.com/wp-content/uploads/2010/10/child.swf?salesman=Schrute,Dwight. I get the concatenation but I dont get how this URL was generated? How do I develop my URL? My URL is able to display in a browser. My URL is
http://kln-ftvp/KLNPheonix//LinkToReport.htm?fqn=MyEnterprise.Public.graphtest&run=true
SWF Loader shows 100% instead of Dashboard.
Even with my URL being able to display in internet explorer, I still only show 100% and a blank screen. Can anyone help me with any of the issues I am having trouble with? Your help is most appreciated. Thank you.

It looks like you have more than one problems so it might be good to separate them out.
Issue 1 - Logging on to BusinessObjects
You say that when you try log on to the BO Platform you get the error message there is no central management server running on port 6400. I'm assuming you are trying to do this from the Dashboard designer.
Does it work when you try to log on from the web browser?
Make sure that you enter the correct system name in the system field when trying to log on from Designer. If you are unsure, either check what system name is used when you log on from your browser or check with your BO administrator.
Issue 2 - Passing values to a child dashboard
If you try to preview the dashboard in the designer, remember that the swf loader doesn't work in preview mode, so whatever you are trying to display won't be visible.
First of all you need to have 2 separate flash files that works independently of each other. The one that you are planning to use as a child flash, make sure that you create the flash variables so you can pass variables to it and use them to filter your data if that is your requirement. But hold off on that for now.
When you have 2 working flash files, save them both to the BI Launch Pad (or InfoView if you are on 3.1) and make sure they both work there. Then get the opendocument url for the child dashboard and try to open it in your browser directly using this url. If that works, use the same url in the swf viewer in the parent dashboard, save the parent dashboard back to BI Launch Pad and open it. It should now work.
Let me know if you have any problems with these steps.
Cheers,
Josh

I want to transfer data

i want t transfer data from one notebook to the next how do i do that?

Hi lisaray,
There are many ways to achieve this includng, but not limited to:
1. Burning the data onto CD/DVD media
2. Using a USB flash drive
3. Using an external hard disk
4. Having both Macs on the same network and turning File Sharing on
5. FireWire Target Disk Mode - http://docs.info.apple.com/article.html?artnum=58583
RD

I want to transfer data through the serial port in the same coding that hyperterminal uses. How can i do it?

The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.

nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Want to transfer data to another cpu

got a new computer, want to transfer data from this computer to the new one
i proceeded to sync up - created an account (on this computer not the new one) the new computer is asking for the code number from this computer but i am not able to find that - it wants the code number from the new computer - why can't i go back to the beginning - why do i have to write this in a question instead of getting to a person? at 2 in the morning - where am i going to get an answer?

Hello - sorry to hear that Firefox Sync is being awkward. It sound like you're at the stage of entering the 12-character 'setup code'. If you have an already set-up Sync account on your '''old''' PC, what's suppose to happen is that you:
* Do 'Set up sync' on your '''new''' PC
* The new PC gives you a 12-character code to enter on your '''old''' PC
* On the old PC, you open the Options window (usually from the Firefox menu), go to the Sync section and click the '''Pair a Device''' link.
* You should see the window to enter the code from your new PC.
You can find more detail, with screen-shots, at [[http://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync|http://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync]].
Hope that helps!

Want to transfer data from 2 source systems

hi everybody ,
i want to transfer data from 2 source systems into a info cube, how can we do that and i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?

Hi
The solution given by Paolo will not work 100% correct.
Even if you create ODS and with record number as key of ODS the data in ODS will be record no 1,2,3,4,5,6,7
But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
Have a look at SDN threads on compounding-
Re: Compounding
Re: Tips on Compounding with Source System ID
Hope it helps
Regards
Pradip
(don't forget points)

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface.

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface. Has anyone done it before?

Hi Subhash,
Please open this link to see the details:
http://help.sap.com/saphelp_scm70/helpdata/EN/89/bd3e42ce98033be10000000a1550b0/frameset.htm
You perform the data transfer in the following sequence:
Plant
Setup groups
Work centers
Routings
You check the setup groups in SAP APO.
You create the setup matrixes in SAP SCM.
Thanks, Marius

Lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lr5 when photo is transferred to photo shop

lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lightroom 5 when photo is transferred to photo shop
I am not able to keep the changes made in light room when I transfer to photo shop

Something you need to understand. Unless you are using the latest version of Photoshop Elements, it's possible that some of the adjustments that you make in Lightroom won't transfer to Elements if you choose the option to open anyway. If you choose the option to edit a copy with Lightroom adjustments then Lightroom will create a TIF or PSD file (depending on your preferences), and that file will include all of the adjustments that you have made using Lightroom. Then you can finish your work in Photoshop Elements.
The process of transferring an image from Lightroom to Photoshop or Photoshop Elements involves the Camera Raw plug-in. It has to be used to interpret the Lightroom adjustments and apply those adjustments to the image after it has been converted. Files open in Elements or Photoshop or no longer raw images because those programs are incapable of editing raw image data. I don't know if this will help you in this situation. Feel free to ask if you have more questions.

SQL server support or can store data in multiple languages? If so, how is it done

Hi All,
Can you please let me know If SQL server support or can store data in multiple languages? If so, how is it done..
Thanks,
Subbu
Thanks, Subbu

Yes, you have to use Unicode data types such as nchar and nvarchar to store the data. See https://technet.microsoft.com/en-us/library/ms191200(v=sql.105).aspx
Satish Kartan www.sqlfood.com

Loading data in multiple languages using Import Manager

Hello Experts,
I have a description field associated with Main table, and need to load the data in multiple languages.. How to load the data in Multiple languages using Importmanager?
Thanks in advance..

Hi Kiran,
Please do the changes as mentioned in this threads:
Re: Multi Language Question
Multilingual field
Regards,
---Satish

Hi, i have adobe elements 12 (downloaded) for windows 7 pc, but want to transfer it to mac (not keeping the pc). how to ?, please.

Hi, i have adobe elements 12 (downloaded) for windows 7 pc, but want to transfer it to mac (not keeping the pc). how to ?, please.

Download the Mac version and use your serial number to acrivate it. As long as your license is mulriplatform it should work.
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

Populating multiple textboxes using a objects assigned to a combobox

Here I have attached the code I used to populate multiple textboxes using a object which selected dynamically using a combo box at run time. but it gives me an error that saying the object reference not set to an instance. Any suggestions?
CounterTotal[] arrayOfObjects =
CounterTotal[])idComboBox.Tag;
CounterTotalaCounterTotal =
                arrayOfObjects[idComboBox.SelectedIndex];
                idComboBox.Text =
Convert.ToString(aCounterTotal.id);
                descriptionTextBox.Text = aCounterTotal.description;
                totalValueLabel.Text =
Convert.ToString(aCounterTotal.total);
                dateCreatedDateTimePicker.Text =
Convert.ToString(aCounterTotal.dateCreated);
                feeTextBox.Text =
Convert.ToString(aCounterTotal.fee);

Please use the "Insert Code Block" button when posting code (it's the button to the right of the "HTML" button, the one with the < >) . It's much easier to read:
CounterTotal[] arrayOfObjects =(CounterTotal[])idComboBox.Tag;
CounterTotalaCounterTotal = arrayOfObjects[idComboBox.SelectedIndex];
idComboBox.Text = Convert.ToString(aCounterTotal.id);
descriptionTextBox.Text = aCounterTotal.description;
totalValueLabel.Text = Convert.ToString(aCounterTotal.total);
dateCreatedDateTimePicker.Text = Convert.ToString(aCounterTotal.dateCreated);
feeTextBox.Text = Convert.ToString(aCounterTotal.fee);
Which statement is causing that exception? You should be able to see, while debugging, which object is null ... that should be a clue to you as to which object you need to fix (create an instance of).
~~Bonnie DeWitt [C# MVP]
http://geek-goddess-bonnie.blogspot.com

I want to transfer data from my old mac book pro to my new macbook pro

hi Guys,
i purchased a new macbook pro with retins display and i already started using it. Now i want to transfer the old setting and data from my old mac book pro to the new one.
how can i do that, since the message that pops up when the mac is new that gives you options to chose where to transfer files is gone
please help

yes - it's the same as setup assistant which is the one that pops up when you first set up your macbook.
have a look here: http://pondini.org/OSX/Setup.html

If we want to transfer data to multiple receiver using context object, how

Similar Messages

Maybe you are looking for