If you accidentally click on date "pop down", how do you cancel it?

If you accidentally click on date "pop down" in a document or email, how do you cancel the window that pops up?
A calendar entry pops up, but has no Cancel button, no close box, and does not respond to ESC key.

Barney-15E wrote: Click somewhere else. Esc works for all the other data detectors, but not calendar entries, it appears.
Clicking elsewhere does not work, either.
I had to close the document to get rid of the window. Even scrolling does not move the window. Bad design, Apple.

Similar Messages

  • When I tried to download some music to my IPhone off of my PC and it said "Should we trust this computer?" and I accidentally clicked Don't Trust. How do I fix it so it will trust my computer?

    How do I fix this? I need this music downloaded so I can pratice for a play.

    When you connect your iPhone, iPad, or iPod touch to a new computer or another device attempting to access the files of your iOS device, you’ll be asked to verify that you trust the connected device. Tapping Trust will allow this device to access files stored on your iOS device.
    If your iOS device is passcode locked, you need to unlock the device before you're asked to trust the connected computer or device.
    To trust a computer:
    Connect the computer or other device to your iOS device.
    If your iOS device is locked with a passcode, unlock it.
    Tap Trust.
    If you're about to sync the device with iTunes, click Accept.
    The trusted computer or device can access the files and settings of your iOS device. A trusted computer can sync with your iOS device, import photos, access movies and videos, contacts, and other such content, until you disconnect. The data stored on your iOS device is not exposed before you enter your passcode (if enabled) and choose to trust the connected computer or device.
    If you choose not to trust the connected computer, you can charge your device, but the connected computer won't be able to access any content on your device.
    Additional Information
    Note: If you select Trust, the computer will be trusted indefinitely. If you select Don't Trust, you will be asked if you want to trust that computer each time you connect your device to that computer.
    RECONNECT IT AGAIN AND PRESS TRUST

  • I accidentally clicked Forget Time Capsule Disk, how do I get it back?

    The TC is an older 1T and I am using a MacBook Pro (mid 2010) with Mountain Lion. 

    You will need to power down, and then power up the TC again.
    If AirPort Utility cannot find it, you will need to start from a Factory Default Reset condition on the TC and then re-configure it.
    Resetting an AirPort Base Station or Time Capsule FAQ

  • I asked a question and accidentally clicked "this helped my question" . how can i delete that

    Yeah i really am stupid. i clicked the "this helped my question" button to somthing that didnt help at all! any way to delete it?

    No, the point award system does not permit retraction once awarded.  You just have to let it go.

  • I accidentally clicked "Auto Size All Columns" HOW DO I UNDO THIS?!  It isn't letting me resize the columns.

    It's really getting on my nerves!  Is there any way I can go back to manually changing it?!

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps?

    I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
    1. I have jailed break my iphone and I never purchased any apps from itunes
    2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
    3. I am using window 7
    I sincerely hope you guys can help me.
    Regards,
    Stephen Hong

    alrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
    I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
    Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you!

  • HT201210 I accidentally clicked dismiss when it asked if I wanted to update it and later when I went to system update it said that iOS 5.11 was up to date what do I do? Can I still update it?

    I accidentally clicked dismiss when it asked if I wanted to update it and later when I went to system update it said that iOS 5.11 was up to date what do I do? Can I still update it?

    If you were using OSX 10.7 then you could go back to a previous version, but you have overwritten the file.
    Peter

  • Can you help me to retrieve my applications. In iTunes I accidentally clicked the Restore button in the Summary screen. It restored the original settings and I lost all my applications and don't know if it is possible to retrieve them.

    Can you help me to retrieve my applications. In iTunes I accidentally clicked the Restore button in the Summary screen. It restored the original settings and I lost all my applications and don't know if it is possible to retrieve them.

    All apps on an iPhone, iPad, or iPod Touch should be in your iTunes library on your computer.
    You can re-download all 3rd party apps and you won't be charged again for a purchased app as long as you use the same iTunes account to re-download the apps that was used to purchase the app originally.
    http://support.apple.com/kb/HT2519
    Do this with iTunes on your computer. After you have re-downloaded every app one by one, select Sync Apps under the Apps tab for the device's sync preferences along with selecting the apps below that you want transferred to the device followed by a sync to re-install the apps on the device.

  • I accidentally clicked 'don't trust my computer' on my iphone 5, it was a total accident as I wanted to click'trust my computer'. What can I do 2 gt tht message pop up back? I tried resetting my phone n turning it on and off. My PC is windows7

    I accidentally clicked 'don't trust my computer' on my iphone 5, it was a total accident as I wanted to click'trust my computer'. What can I do 2 gt tht message pop up back? I tried resetting my phone n turning it on and off. My PC is windows7. Please help mee people n apple . Thanks

    Hi Rebekah...
    This problem seemed to have worked itself out... Somewhere amongst these solutions...
    1. Reinstall iTunes
    2. Restart computer
    3. Restart iDevice
    It didn't at first, and I thought to myself... "Oh great, another problem which Apple doesn't acknowledge as existing", but don't worry. Give it a couple of restarts, and if all else fails... Create a new Windows Logon and try from there.
    It just happens I was in the middle of reformatting my PC and resinstalling Windows 7, so it wasn't so much an issue when I wiped as it worked when I tried it on a fresh system.
    Hope something helps...

  • How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto.  I accidentally clicked "never ask again" so it never appears.  I want it back.

    How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto.  I accidentally clicked "never ask again" so it never appears.  I want it back.

    The following previous discussion may help: Re: Delete Confirmation Warning.  I want back.

  • How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    Type "about:config" in the location bar.
    Filter for "privacy.popups.showBrowserMessage"
    Change this to true by double clicking the preference (or right click and choose Reset)

  • How to disable context menus hiding when accidentally clicking non-text?

    I have Googled and searched the Apple support board for this everywhere, and cannot find this addressed specifically. What I would like to do is disable how the context menu (for toolbars, right click, whatever)  automatically disappears if you accidentally click one of the dividers or any white space in the menu, instead of one of the actual text options. I keep doing this numerous times throughout the day on accident and it is driving me mad haha.
    To get an idea, right click anything in Firefox for example (except for the top menu bar) - and in the context menu that pops up move your cursor so it's not highlighting anything and click  (like the menu's grey divider bar). The menu will stay popped up even if you click, just like they do in Windows. In every other Mac menu, it instantly just closes that menu. Firefox is the only app for Mac I have seen do this, but I'm sure there are others.
    Seems like kind of a minor thing (which is probably why I can't find anything lol), but I move between apps and menus all day long and use a touchpad so I'm bound to accidentally click just below an option all the time... Then I have to move cursor back to toolbar, highlight menu option again, and find where any sub-options were - sometimes can be in numerous sub-menus! Any help is greatly appreciated!! Thanks

    Ok, here you go.
    In your context, apart from your display fields, add another attribute READ_ONLY, type char01. And lets assume you want the field by name field_1 to be editable or not based on some validation. Your code will be like this to initialize the ALV.
    DATA:
              l_alv_model               TYPE REF TO cl_salv_wd_config_table,
              lr_column_settings        TYPE REF TO if_salv_wd_column_settings,
              lr_column                 TYPE REF TO cl_salv_wd_column,
              lt_col                    TYPE SALV_WD_T_COLUMN_REF,
              ls_col                    TYPE SALV_WD_S_COLUMN_REF,
              lr_input_field            type ref to cl_salv_wd_uie_input_field.
        l_alv_model = l_ref_interfacecontroller->get_model( ).
        l_alv_model->IF_SALV_WD_TABLE_SETTINGS~SET_READ_ONLY( abap_false ).
        lr_column_settings ?= l_alv_model.
        lt_col = lr_column_settings->get_columns( ).
        LOOP AT lt_col INTO ls_col where ID = 'FIELD_1'.
             create object lr_input_field exporting value_fieldname = ls_col-id.
             lr_input_field->set_read_only_fieldname( 'READ_ONLY' ).
             ls_col-r_column->set_cell_editor( lr_input_field ).
        ENDLOOP.
    In your event handler, you read your node, do a get_static_attributes_table. Perform all validations. Loop through your internal table and set the field READ_ONLY as 'X' when validation succeeds. Do READ_ONLY = space when validation fails. Then do a bind_elements. Now the rows for which read_only is false, will be editable and vice versa.
    Hope I was clear enough. Get back if you have any doubts.
    Regards,
    Nithya

  • I accidentally changed all dates of all events, how do I correct it?

    Hi,
    I accidentally changed all dates of all events, now my entire library of 17000 pics is messed up. Fortunately I have the luxury of two backups: time machine and old Toad's iPhoto dB Backup. Which one should I use, to get back were I was?
    Thank you

    If you trust the TM version, delete the current library and then restore the TM version. Or, get an external HD or connect to another Mac to temporarily store the current version.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Microsoft Project 2013 - Finish-date drop-down arrow

    When I enter a finish date with year at 2000, 2001, ... and beyond, then click the right drop down arrow, to adjust the date via., calender view, the calender view is at 2079.  I have no
    idea why it jumps forward 79 years, but obviously it makes it impractical to use the calender view to make minor date adjustments.
    Any ideas would be appreciated.
    Thanks,
    Scott 

    Scott,
    Pardon my bumping in but let's make sure we're talking about the same thing. You use the term "calendar view" but I don't think that is what you meant. In Project the Calendar View is a whole separate defined view. You can find it on the ribbon under View/Task
    views group. One of the reasons I don't think you really mean the Calendar View is that I'm not aware of any right drop down arrow anywhere on that view, but then I don't have Project 2013.
    So, for clarity sake, do you really mean the small calendar that pops up when you activate a date field cell (e.g. Start, Finish, etc.) and then hit the selection arrow, (which is on the right side)?
    This may seem like a small thing but more than once have we gone round and round trying to help a user when part of the problem was a misunderstanding due to incorrect terminology.
    One other thing. I assume you realize that by entering dates directly into the Start for Finish fields, you will be setting a constraint on that task.
    With that, I'll leave it to Guillaume.
    John

  • I accidentally clicked restart with windows vista.now i cannot get out of it. i cannot eject the disc and i am stuck on the installation page

    I accidentally clicked restart with windows vista. now i cannot get out of the installation  page and no matter what i try i cannot get it to start up with macintosh. i cannot ejet the disc either.

    i was going to say the exact same thing as jerry.  You can also eject the disk in that mode if you want.  It also works if you hold down the option key before you turn it on- just so you dont miss the moment.  What I say to do is power off, hold down the option key, while holding it down, power on.  When a menu pops up, you can let go of the button.  Once in the mode, select with the mouse your mac os hard drive/ boobable and then click enter or click the arrow on it. Then your fine!

Maybe you are looking for