If you can solve this you're a GENIUS!!!

Okay so Im burning a warmup cd for my team and I have cut all the songs according to the parts of the song I want.( I learned this from a previous post I had). However when I burn the cd it takes the song that is in the 7th postition and adds silent time to it. It doesnt matter what song it is. For example the one now, I cut it for 2 minutes and the original song is 4:38. Before I burn the cd the song says 2 minutes and then after I burn the cd it says 4:38 and when it plays off the cd it plays for two minutes and then goes silent for 2:38. Ive tried everything please help!!!

Go to iTunes > Preferences > Advanced > Importing and set the encoder to WAV (automatic settings). Then select the files in question from your iTunes library or playlist and use the Advanced > Convert Selection to WAV menu to convert the files to WAV format. Make sure "Kind" is enabled in your view options (Edit > View Options) so you can easily identify which songs are the WAVs and which are the original MP3s.
You can now select the WAVs and use the File > New Playlist from Selection menu to create a playlist to burn to CD. First, make sure to go to iTunes > Preferences > Advanced > Burning and set the disc format to audio CD.
When you're done with all of this, remember to go back and change your importing preferences to whatever you like to use, as WAV probably isn't what you want for general use.

Similar Messages

  • If you can solve this problem u r genius - plz help me

    Hi
    In my project in jsps i have ajax components also i have liabraries installed, my pages were running fine but
    suddenly
    my pages are showing following exceptions from last 2 days
    Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
    Exception Details: javax.servlet.ServletException
    com/sun/rave/designtime/faces/FacetDescriptor
    Possible Source of Error:
    Class Name: javax.faces.webapp.FacesServlet
    File Name: FacesServlet.java
    Method Name: service
    Line Number: 209
    Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:209)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
    org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
    org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
    org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
    org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
    com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
    com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:311)
    com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
    Exception Details: javax.faces.FacesException
    javax.servlet.ServletException: com/sun/rave/designtime/faces/FacetDescriptor
    Possible Source of Error:
    Class Name: com.sun.faces.context.ExternalContextImpl
    File Name: ExternalContextImpl.java
    Method Name: dispatch
    Line Number: 327
    Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:327)
    com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:311)
    com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
    Exception Details: com.sun.rave.web.ui.appbase.ApplicationException
    javax.servlet.ServletException: com/sun/rave/designtime/faces/FacetDescriptor
    Possible Source of Error:
    Class Name: com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl
    File Name: ViewHandlerImpl.java
    Method Name: destroy
    Line Number: 601
    Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java:601)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:316)
    com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)

    Others have run into similar things. See if one of these links offers any help and if not try to google for FacesServlet.java:209:
    http://forum.sun.com/jive/thread.jspa?threadID=53007&messageID=203285
    http://216.239.51.104/search?q=cache:AfLuf3bQkQAJ:swforum.sun.com/jive/thread.jspa%3FthreadID%3D53358%26tstart%3D0+FacesServlet.java:209&hl=en&gl=us&ct=clnk&cd=1
    My guess is that something may have gotten corrupted (second link) unless someone changed something from the time it was working to the time it stopped working.

  • [Desperate] Our company will pay if you can solve this memory problem!

    We have a java program running in linux. The problem with this program is that it's memory usage keep increasing in size and does not stop. Eventually all the swap space will be used and the system dies. However, here is the key, the heap usage DOES NOT INCREASE. We cannot figure this out. What could the problem here?
    Heap Usage shown by profile: cycles between 450-500Mb. VM was set to havea 600Mb limit
    Total memory usage 6Gb shown by the unix utility top and growing.

    sabre150 wrote:
    Yarlag wrote:
    sabre150 wrote:
    Yarlag wrote:
    I'm sorry we can provide any information as need, but we are really just not sure where to start.
    1) We do not use any runtime.exec
    2) No native libraries
    3) We have no file I/O but plenty of network I/OI doubt if I can really help but if you close the program before running out of swap space is the memory returned?Yes if I close the program, all memory (both resident and in swap) is returned to the OS.So as I initially surmised, you seem to have a native method memory leak. How you find it I don't know.
    What version of Java are you using?
    Are you using one the the non-Sun Java abominations such as gcj or Openjdk? If so then don't .
    Edited by: sabre150 on Sep 29, 2009 8:46 PM1) How do you come to the conclustion that I have a native method memory leak? No evidence suggests that and we know that we do not use any native method.
    2) 1.6
    3) Sun's JVM

  • If you can solve this problem, then you are a true iPod Classic Genius !

    So I have talked to every level at Apple's iPod support, and to list all the things they made me do would exceed the size limit of this message board. They even made me send back my original iPod Classic, and I had to wait for almost 1 month to receive my replacement. Here is a summary of my problem, that they (Apple support) have not been able to solve :
    - I have a very extensive iTunes collection - over 77,000 songs. All of them were ripped, using iTunes.
    - I use the ID tags extensively - i.e. every field is used, and the comments are filled to the maximum allowed characters.
    - I am not able, to synch more than ~ 23,300 songs to any of my two 160 Gb iPod classics - therefore, including my exchanged iPod, this issue shows up on three different iPods.
    When synching more than 23,300 songs, my iPods are no longer able to play any songs. In the 'About' menu, the iPod shows the wrong number of songs (i.e. 17,300 instead of 24,000) and a huge amount of 'disk space used' is flagged as 'other' (in orange). When clicking on 'Album' or 'Songs', the iPod shows the message 'No songs found'.
    When synching less than 23,300, I am able to resolve this issue by restarting the iPods after synching. However, even when synching less than 23,300 titles, the iPods show the wrong number of songs, right after synching, and the huge amount of 'disk space used' for 'other'. Therefore, I have to restart my iPods every time I synch them.
    The same problem occurs when using my old Power Book G4 (OS X 10.4.10), and on my new 2.4 GHz MacBook Pro (OS X 10.5.1).
    I am using an external HD to hold my music files, which is directly connected to my USB2 port on either Laptop.
    I have uninstalled and re-installed iTunes and all the firmware and software is up-to-date.
    I have rebuilt my iTunes Library from scratch several times.
    I have no problem, playing any of the 77,000+ songs in iTunes.
    My assumption is, that there is a size limit for the iTunes library index file on the iPod. Can somebody confirm this theory ?
    It seems funny, that the same problem shows up on three different iPods using two different Mac computers.
    Does anybody have the same problem ?
    Is this an issue that Apple is ignoring ?
    Does anybody know, how this can be resolved ?
    Thank you very much for your help.!
    Message was edited by: Rochelle Renee Christen

    Hi There,
    I have the exact same problem as you. I'm on my third ipod 160gb. All three have had the freezing and resetting problem. Like you my problems only start once I try to sync more than about 20,000 songs, which is around 90gb.
    I have a 140gb music library. If I sync 70gb of my library it works fine. If I wipe that and sync the other 70gb it works fine so I know my mp3 files are okay. If I try to upload the whole library it freezes when I try to select any music.
    If I'd only wanted to sync half my music library I'd have bought an 80gb ipod.
    I thought firmware 1.1 and itunes 7.6 would solve my problem. No. Exact same problem. I contacted apple support. A genuinely helpful guy advised me to rebuild my music library and change my ipod drive letter. With baited breath I did all this, then restored my ipod to start from a clean slate. I synced my library in 10gb chunks... and it froze up around 90gb just like it always does.
    What upsets me is the hours I've spent glued to my PC re-syncing music, searching through forums for answers. I'm absolutley pig sick of it. I never had a minutes trouble with any of my other ipods.
    Please, please, please apple investigate this problem, it only happens when these ipods are over half full. Please let us have a firmware update that addresses the bugs us folks are complaining about instead of adding new features we'd be grateful for if only our ipods worked in the first place.

  • You're miraculous if you can solve this

    It involves the mini and the inMotion speakers I connected to. Because my AC to DC adapter broke that connected the inMotion to my iPod mini, I went out and got a replacement AC power adapter... well... I read directions, and set the adapter to 9V output and connected it to the speakers. the mini lit up... (I saw the glorious apple) and then it cut off... then it lit up and showed the "low battery" picture, and then it cut off. This happened at about 5 second intervals before i cut the whole thing off.
    ...Then i tried to hook my mini into a normal power outlet w/ itsown connectors, and it did the same on/off thing! So... it won't light up, it'll just show me an apple or a low battery, etc. What do i do? is it something w/ the adapter? could that have possibly affected the mini on the inside? was it too much voltage? plz help! -MC

    A simple reset might solve it all. Look for the instructions in your Owner's manual, but as I recall, pressing on play+menu is the right combo, hold for a few seconds and voila. CAUTION: it will also erase everything you have on your mini!

  • If You Can Solve This One, Then You Seriously Win

    Here's the deal. I have a 3G 15gig iPod that I refuse to let die. It has a new battery that I recently installed.
    It will not charge through firewire to the wall or to my macbook pro, nor will it charge through usb (which goes without saying on 3G's). There are 2 ways to give it power, my roommates Bose iPod soundsystem, and my G4 tower at home through firewire. No other way to give it power. (Read: firewire seems messed up.)
    Something is corrupted and I've tried every possible way to erase the disk and corrupted files to allow me to Restore the system firmware. The iPod is hasn't worked in some time. A PC will recognize it (but not in iTunes) so I've formatted it on a PC to FAT32 through Windows XP. Then plugged into my macbook, no dice. I thought erasing the corrupted files on the PC would do something, but it didn't.
    On a mac, it will recognize the iPod through USB, not through Firewire. Incidentally, I can run Disk Utility and format the pants off the thing, but to no avail. I've erased and formatted, in Mac Os Extended, and in Extended (Journaled), I've even done the "Zero Out Data" erase, which turns the entire disk into zeros--but that doesn't work either. No matter what I do, the iPod will show me the Folder icon after starting up.
    When the iPod is recognized through USB, it will be formatted through Disk Utility, but not through iTunes, which claims that "iPod must be connected through firewire to restore." The hitch of course, is that the iPod refuses to be recognized on firewire.
    Recently, after doing the Zero-Out-Data erase, iTunes didn't refuse to Restore because of USB, but instead gave me the 1418 error as I tried to Restore through USB.
    So my question, how can I fix this sucker without buying a new harddrive?
    How can I restore an iPod through USB, or how can I get my macbook pro to recognize my ipod through firewire?
    Much, much obliged if you have any input.
    --David.

    I'm thinking of purchasing a new hard drive, as I think that is the problem. Would this likely allow me to charge my ipod again via firewire and restore it, etc.? Or does the fact that I can't connect via firewire mean there is something deeply wrong? (ie a new logic board would be in order)

  • Big Problem in Logic, If you can solve this problem ur truly a Mac Genius

    Hello folks, as the title suggests, I have an enourmous problem. I am an 18 year old aspiring producer/engineer who cashed out his entire savings to buy a sick mobile recording setup to take to Germany for a year as a foriegn exchange student. The bare bones of my setup are as follows:
    1.83 gHz Macbook pro with 1.5 gb Ram
    Logic Pro 7 universal
    Presonus Firepod
    Glyph 80 gb 7200 rpm drive
    Here is the problem. When I try to record a track in Logic Pro, the bar ruler lights up red like it is supposed to, as does the record and play buttons in the transport window, but no window comes up saying recording to blah blah blah HD, and then instead of recording the Song Position line just moves forward like normal but leaves behind no audio region.
    Here is where it gets tricky. Logic will record with the built in Microphone, but not the Firepod. Garageband works absolutely perfect with the Firepod and as far as I can tell the Firepod works perfectly. I have tried all of the obvious solutions so far such as repairing permissions, deleting preferences, blah blah blah, the support staff at sweetwater (who I bought the system from) can't say why it isn't working because everything is compatible, apple couldn't fix it and then said it was because I didn't have a 7200 rpm drive, then I bought one and it still didn't work. What the **** am I supposed to do!
    As far as I can tell there is some sort of OSX incompatibility with this system that should have been fixed long ago. By the same token there are other people sucessfully using the exact same setup as I. Please god, or anyone else out there with a solution, what should I do to get this system working! I am so anxious about this!

    Ok, In my hardware/audio drivers pane, logic recognizes the firepod by name. I have it selected there although this device does in fact use core audio drivers to run not 3rd party ones... In addition it doesn't matter one bit what input I have selected because it doesn't even leave behind a blank audio region. It leaves absolutely nothing behind. I have also tried refreshing my record paths many times. I have no clue then why my buttons and bar ruler light up, does this indicate anything to you guys as to the nature of the problem? Applecare is pretty stumped. I recently did a complete reinstall of everything, including OSX, then did all the software updates and that still didn't work. As for the aggregate workaround, I have not yet tried that. This is such a wierd deal because sometimes it will record one track just fine, and then I will try it seconds later with the exact same setup, and it won't work. So basically it has recorded quite a number of times with my setup, it just refuses to do it the majority of the time. ***!

  • Okay, better explained here. If anybody can solve this you would be amazing, please.

    gopro hero 3 black + premiere pro cs6...
    I shoot at 720p 120fps.
    Premiere doesn't want to read that as 120fps, it wants to read it at 60.
    Video is slow while the audio remains okay but cuts off far too early.
    I can go into modify the clip to make it read as 120fps but then my audio is super fast.
    Tried unlinking audio and video beforehand but it still applies when the clip is dropped to the timeline.
    I used cineform to convert my files but it ends up turning 300mb into 1.5gb...
    I think I may need to figure a h.264 codec within premiere because that is what gopro writes with I think?
    How can I fix this issue this is getting to be obnoxious...

    hello, here is another thread with similar issue and the op seems to have it kinda working
    http://forums.adobe.com/thread/1141054
    post 14
    re: the chipmunk audio, i think in the speed rate setting there is a check box to preserve audio pitch (i'm not sure exactly)
    the time remapping feature might work because it does not affect the audio
    here is a creative cow forum thread where the op says it works (perhaps you could post there and get him to give advice)
    http://forums.creativecow.net/thread/3/935431
    the more information you provide the more users can help you
    here is another thread re: gopro3
    http://forums.adobe.com/thread/1116162
    here is a link to converting files if you have a mac
    http://www.brorsoft.com/how-to/import-gopro-hero3-1080-60p-mp4-to-premiere-pro-cs6.html
    here is one from the gopro forum
    http://goprouser.freeforums.org/wvga-120-fps-adobe-premiere-settings-t8315.html

  • You are an iPod expert if you can solve this one

    Here's what's happening:
    ~I plugged my iPod into the wall, and it worked perfectly fine...UNTIL I hit the play button. Then it starts to make a clicking noise approximately every five seconds
    ~I wiped out all of the songs by manually restoring it, but when I went to plug it back into the wall again, all of the songs magically reappeared (I'm stumped as to how that happened)
    ~The battery icon says it's charging but will show that it's entirely dead.
    ~Both the software folder symbol AND the sad iPod icon have appeared but switch off and on.
    ~My computer recognizes that it's plugged in as a 'Removable Disk' but iTunes doesn't recognize it.
    What i've done:
    ~Reset it more times than I can remember
    ~Restarted my computer a LOT
    ~Reinstalled iTunes with all of the software updates.
    ~Plugged and unplugged it from the wall charger to give it back the little life it appears to have left.
    My warranty is long expired so this is my last attempt to fix it. I'd rather not have to go and spend another 250 bucks on another 20 or 30 gb so any help is appreciated. Thanks for reading!

    There is a pretty comprehensive post written by another forum member which is about the sad iPod icon or the folder and ! icon.
    The Sad iPod/folder and ! icon.

  • If you can answer this you must be some kind of iTunes God

    It is said that anyone who could answer these questions must be the iTunes God as prophecied since the creation. The creation of iTunes, that is. While editing a smart playlist, how can one set the limits of 'last played' songs in the range of certain hours of the day rather than certain days. For example all songs last played between the hours of 12am and 6am on any given day. Also, is it possible to create options such as this if it does not exist, and define it in terms of macros or the like?

    He who created the great and shiny iTunes did not allow the beleavers to filter their tunes of diversion by the very minute those divine songs were played. For this unholy feature was only practiced by heathens and the followers of mammon.
    So much for gods intentions ...
    Now seriously, iTunes does not keep tracks on which time you used to play a certain song on several days. The only thing that is kept is the last time that song was (entirely) played.
    So, until Apple coders integrate that feature, it is - plain and simple - impossible.
    "But fear not!" the prophet said "Do not abandon hope! Send prayers to the allmighty creator and you all shall receive!"
    Windows XP Pro

  • I have a problem, from system test says:  Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

    I have a problem, from system test says:  Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

    If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
    If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
    Good luck in any case.

  • When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    mostafa182 wrote:
    ... how I can solve this problem?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

    because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

    That seems very suspicious. Two suggestions.
    First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
    I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
    Second thought: malware. You could supplement your usual security scans with these:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    HouseCall : http://housecall.trendmicro.com/
    Hope this helps.

  • When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

    when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

    Step by step, how did you arrive at seeing this agreement?

  • HT1386 I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    how new is the Notebook ?
    Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB

Maybe you are looking for

  • How can I log out my firefox sync account from the desktop remotely?

    Once I went to my friends' house, and I installed the firefox there and made it synced with my account. And now I want to stop syncing my bookmarks and other things with that desktop, so is there any way to stop syncing? Or is there any way to log ou

  • IMac login problems on any 10.6 update

    I have a 24" iMac that is 2 years old. After using snow leopard on my husband's new macbook I decided to get it for my imac. The base install of 10.6 works fine but of course it immediately wants to be updated to a new release. If I update it past th

  • Password for transfer to iPhone 6

    I back upped my iPhone 5 via iTunes.  Connected new iPhone 6.   Clicked "restore from this backup." Entered password when requested and repeatedly got the message "iTunes could not restore the iPhone ... because the password was incorrect."   Well...

  • Problem with DESCRIBE field-symbol statement?

    Hi I havw written following querry but it's showing error. My doubt is there any resctriction field symbols in DESCRIBE query. i wrote describe field <a> type typ  length in character mode. Is that syntax correct?

  • Blank page issue in adobe forms

    dear expert, i have pdf form of 13 pages having many subforms in one of the subforms i am adding the row dynamically by a button add button . The row is being added but what is problem,when addition of row reaches to end of page it creates the blank