If you connect mac to 3d tv will it show in 3d, If you connect mac to 3d tv will it show in 3d
If you connect mac to 3d tv will it show in 3d, If you connect mac to 3d tv will it show in 3d
Try these:
Similar Messages
-
Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks
There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/
-
Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial programs, a popup window shows the message " you have been disconnected" Connect to continue. The same message comes after repeated attempt to entering the login and password info. How can I solve this?
Hi Jeff,
Here is the screenshot of the window which comes after any attempt to download a trial version. It is in French, it means you have been disconnected, connect to continue. -
trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ? Thank you
There is a version of Firefox 4 available for PPC Macs:
TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
Macs that supports both Mac oS X 10.4 and 10.5. has been released.
Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
PC with the fourth beta of Firefox 4.
TenFourFox uses almost all the same code as Firefox 4 and has nearly all
the same features, including faster JavaScript, WebM video, and HTML 5
and CSS 3 support, as well as new and emerging Web features, but with
the code needed to keep your Power Mac functional and fast. Out of beta
and it's ready for action, versiob 4.0.1 is a performance, security and
stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
-ation for WebM and browser graphics, and G5 JavaScript acceleration.
For more information, visit:
http://www.floodgap.com/software/tenfourfox/
Source: from http://www.applelinks.com - posted April 25, 2011)
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html and
http://www.bbc.co.uk/news/technology-11673384 -
My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.
-
My I pad 2 will not connect to the App Store suddenly even though the log in details have not changed.
It will also now not play anything in I player, or you tube?
Help! Please!could it be because it does not have a connection to the Internet ?
-
I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.
No, its is connected direct to the providers fiber box.
-
***A tutorial written on trial, error and a big bucket of coffee***
Definitions of the controllers four red lights flashing:
- Slowly ≈ once per second
- Rapidly ≈ twice per second
- Don't flash = off
All the controller buttons you will need to press:
- PS button = the PS-logo button in the centre of the controller
- Reset button = The reset button are located on the back of the controller inside the tiny hole just to the right of the middle screw.. Depending on how you hold the controller. -If you hold the controller upside down, the hole are to the left of the screw... ...never mind -let's go on, shall we? ..(Closest to the L2 button) -SONY recommends that you, i quote; "use a small, unfolded paper-clip or something similar to click the button"
First thing:
0.0 Open Bluetooth Preferences. (System Preferences / Bluetooth)
If if if if if:
0.1 If the controller is connected to the USB cable, disconnect the controller from the USB cable..
0.2 If the lights on the controller are flashing rapidly, and the controller constantly are pushing on and on and on and on to get a pairing request passcode NEVER MIND THE DIALOG BOX! Don't even bother to reject it, it will only reappear pushing you over the edge..
0.3 Press and hold the PS button on the controller for about 10 seconds to make the controller disconnect and go to sleep, or disconnect the controller in the Bluetooth Preferences THE IMPORTANT THING IS THAT THE CONTROLLER HAS STATUS OF BIENG: NOT CONNECTED!
0.3.1 If the controller is disconnected, give the dialog box your meanest evil-eyes and a last ever slam on the reject button if you really can't stand looking at it..
Next up:
1.1 Connect the controller to your iDevice using the USB cable. (Do not disconnect the USB cable until step 1.4) -The lights on the controller will start flashing slowly, and the controller will appear in the list of Bluetooth devices as: PLAYSTATION(R)3 Controller
1.2 If the controller don't appear at all or appears without a name and the address like 00-00-00-00-FF-FF in the Bluetooth Preferences, then just press the reset button briefly and wait for the controller to reappear in the Bluetooth device list. -Never mind if the controller appears two times or more, just carry on, you can always delete the non-connected-Bluetooth-controller-blah-blah-thingies-in-the-Bluetooth-Preferences-list afterwards. The main goal at this point are just that one of the Bluetooth settings is configured..
1.3 Press and hold down the PS button on the controller for about 5 seconds, release the PS button, and first now disconnect the USB cable.. -The controller will now appear as connected and configured in the Bluetooth Preferences
1.4 Finally add the controller to favorites and update services in Bluetooth Preferences / the sprocket pop-down menu. (Don't know what the update services does, but why not click it when you can??)
1.5 DONE! -The controller should now appear in the Bluetooth device list like this:
GOAL:
*** Paired = NO ...And it's a resounding NO -Nobody on this earth knows how to pair the controller!! Connected yes / paired no, no, no ..Never mind that, the controller will work anyway!
*** Configured = Yes
*** Favorite = Yes
*** Connected = Yes
*** Flashing lights on the controller forcing you into epileptic seizures = No ...Hurray
-Actually non of the four lights are lid.. When the controller is paired on the PlayStation it will be given a number 1-7 and the fact that this doesn't happen on the Mac, may properly cause that people are having problems connecting more than one controller to their Mac?? -I'm no expert in this field, just thinking loud..
If if if if if vol. 2
- If you fumble in step 1.4 and let go of the PS button and/or disconnect the USB cable to soon the lights will flash rapidly..
- If you disconnect the controller from Bluetooth and reconnect the controller by pressing the PS button, -which I believe is the only way to reconnect it, the lights on the controller will also start flashing rapidly..
- Or if the lights for some other reason are flashing rapidly..
-To make it stop, cause it's really annoying, do as follows:
2.0 Disconnect the controller in Bluetooth Preferences - The lights stops flashing when the controller is disconnected
2.1 Connect the controller to the USB cable - The lights starts flashing slowly
2.3 Press and hold down the PS button for about 5 seconds, release it, and then disconnect the USB cable..
-You can also connect the USB cable first and then disconnect the Bluetooth afterwards, the difference is the same.. -Or press and hold the PS-logo button on the controller for about 10 seconds to disconnect the controller from Bluetooth (The controller will go to sleep and turn the lights off)I try this good tutorial!
Everything done but..
My PS3 controller connect, the bluetooth panel status is connected, favorite and configured, but "Services" result "NONE" :-(
When controller connect to my MacBook Pro, it continue to lights the led fast and it disconnect automatically from system after 15 seconds
I forget: I run OS X 10.8.2!
Message was edited by: Sethi78 -
I want to add apple tv via hdmi connection , and I already have ethernet input of tv for my viera cast connection, which gets Amazon prime. Wireless connection is APE base and APX, Want to add
apple tv to get Netflix so I can cancel my xfinity premium channels. Will this set up work. p.s as you can tell I am a Mac novice.Providing you have a free HDMI port on the TV and the location you would put the Apple TV will allow it to connect to your network, you should be good to go.
-
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
Mac Mini Late 2012 OS X 10.9.4 loosing network connectivity
I haven't found the exact issue on the forums nor outside it so I'm creating a new thread.
My Late 2012 Mini started loosing network connectivity after upgrading to 10.9.4, both WiFi and Ethernet.
Sometimes it takes around 5 minutes, sometimes more than 30 but the connectivity gets disrupted continuously, the packets stop going in or out for around 30 seconds. I've done PRAM and SMC resets, I've changed network locations, nothing helps and I've found nothing interesting in the system logs.
Also I can't login to the Apple bugtracker due to some error so I'm reporting it here.
The only USB devices i have connected are keyboard and mouse.
Any help will be appreciated.
Mac Mini Late 2012 i5
OS X 10.9.4 MavericksPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
I want to use my grey Mac G4 desktop to Skype. How and where do I connect a microphone
I want to use my grey Mac G4 desktop to Skype. How and where do I connect a microphone. Is it possible?
G4 Macs have no built video/webcams or microphones.
The best solutions are USB devices.
First, you need to determine the version of Skype that you can use. The newest Skype version 5 can only run on Macs with a min. OS X version of OS 10.5.8 Leopard.
Tthe older version of Skype that can run in your Mac is Skype 2.8 found here.
http://www.skype.com/intl/en/get-skype/on-your-computer/macosx/2-8/
There are not a lot of webcams or microphones that work with both Macs and Skype.
Here is the only webcam, from Logitech, that I was using on my previous G4 that was both PC and Mac compatible, but the requirements say you need 1.0 Ghz CPU and OS X 10.5.8 Leopard.
http://www.logitech.com/en-us/webcam-communications/webcams/hd-webcam-c615
Logitech also has a few Mac compatible USB headset audio/microphones, but don't mention Skype compatibilty.
You would need to buy and try to test.
Plantronics makes only one or two models that will work with Macs and general Internet Telephony and include Skype, also.
Here is one here.
http://www.plantronics.com/us/product/audio-345?skuId=sku4920019&mftr=&prodfind= trutrue
Good Luck! -
Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?
iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it. -
Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?
Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers
Maybe you are looking for
-
Can you use iPad Pages to take notes in class?
I was wondering if iPad Pages could be used to mix typing and handwritten notes? So here is what I want, to be able to take notes in class by typing, and when the teacher starts drawing a graph/table/picture on the board, I can switch over to note mo
-
IPhone/Yahoo syncing improved with Mac OS 10.4.11 update
I posted this in the Mail area but am also putting it here for general knowledge http://docs.info.apple.com/article.html?artnum=306297
-
Interactive and parameterized report
I'm very new to Apex and I have a question dont know if its stupid ... if i want to create a report with all the interactive report feature (menu ... etc), but at the same time the query is too heavy and it has to be parameterized, how to achieve tha
-
Can the following scenario be called strategy pattern? public class StrategyExecutor { public static void main(String[] args) { Strategy[] strategies = {new FirstImpl(), new SecondImpl()}; for(int i = 0; i < strategies.length
-
NFL Mobile - Password Reset Bug
I am unable to sign into NFL Mobile on my device because of a recurring issue. I had an unusual sequence of creating and resetting passwords for my verizon account, which I did on the My Verizon App, NFL Mobile App, and on my PC, before I finished se