If you create a 3 level deep site heirarchy (with the first two levels based on the document centre template) the sharepoint OOTB breadcrumbs break

if you create a site collection with document center as the template, then create another document center site (as a subsite) underneath it. Then create a team site (as a subsite) in this document center site. So now you have a 3 level deep site heiarchy
with 2 levels of doc center followed by a teamsite.
Note that the breadcrumb (when I say breadcrumb I mean the drop down folder button which shows the heirachy) shown on the teamsite skips the middle level doc center.
I have replicated this bug in production and in my test server. Has anyone run into this before? This must be something peculiar with the Doc Center template. If I do the same thing but I make the middle level a team site I do NOT have
this problem
krd

Hi,
Per my test, it seems that if the second level uses a different category template except the Collaboration templates, the site will not show on the breadcrumb.
No matter if the first level uses any template, when we view the subsite which uses the Collaboration templates, all the subsites which uses a different category template above will not show in the breadcrumb.
You can create your own breadcrumb using code.
http://blog.mastykarz.nl/building-breadcrumbs-sharepoint-2010/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

How to hide the first 2 levels of Hierarchey in bex

Hi Guys,
I am using Sales Office Hierarchy in report. Hierarchy name is 'First Sales Hierarchy' which is coming as a root node.My requirement is that I do not want to see the first 2 levels of hierarchy,but I want to see the all 3rd level hierarchies only.I have tried with Display of hierarchy properties in the Query its not working.Is there way to go creating customer exit variable to achieve this?
Emple: Screen shot
I have to show only the 3rd level Hierarchy nodes only like corporate departments if user selects Corporate at selection etc..
How can achieve this.can you please guide ...
Thanks in advance
Regards,
Suresh Narayan

Hi,
In our system, once we filtere the hierarchy, it shows only the below nodes, not the above ones..we didn't do any changes....really.....
Just drill down the char with hierarchy into ROWS..might show at higher level..
Now select the level you want to filter - and say "Keep the filter on Axis"..you are done..system shows only below nodes..not the upper ones..
You can decide how many NODES can be shown first time in query settings..

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB

The device is not responding to the first IRQ level

I am using a DAQCard 700 with a NIDAQ 6.9.3 driver on a windows XP. When I install the card and run the configuration uitillity (MAX) and push the test resources button, the computer hangs and responds to no input (not even ctrl-alt-del). When I push out the PCMCIA card the error message: The device is not responding to the first IRQ level. Anybody that has an answer?

Hi PhilV,
It looks like you had an old AT board in a computer and then the power supply went out and you evidently also changed computers to a device with Windows NT. Now that you're in the new computer there appears to be some sort of IRQ conflict that is preventing the board from working.
In the past when I've seen this issue and all of the proper steps have been taken to troubleshoot it, the problem is often that the board died between the last use and the current use. However, it's not always the case, so here are a few other options.
First make sure that you have Traditional DAQ 7.4.1 (if you have LabVIEW 7.0-8.0 or are doing text-based programming) or Traditional DAQ 6.9.3 (if you are using LabVIEW 5-6.1). Then make sure that you followed the installation procedure outlined here: Product Manual: AT E Series User Manual (Chapter 2)
I did a quick search on ni.com for "device not respond base address" and "irq isa" and found some of the following KnowledgeBases and links that should help you properly troubleshoot the device.
"Not Responding to the Selected Base Address" Error
Troubleshooting Plug and Play Devices for Windows NT 4.0
My PC Doesn't Have Enough Interrupt (IRQ) and DMA Channels to Support the Hardware I Want to Install
There have been a lot of advances in DAQ boards since the old AT days, so with newer devices and computers issues like this are rarely seen. Hopefully though, the device you have is not broken and we will be able to find out what is wrong with it right now.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

I have managed to download Firefox - the first two steps apparently successfully but I cannot seem to drag the icon down to the dock. I use a mac mini. Thank you.

I have managed to download Firefox - the first two steps apparently successfully but I cannot seem to drag the icon down to the dock. I use a mac mini. Thank you
== This happened ==
Not sure how often
== not sure ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_7; en-us) AppleWebKit/531.9 (KHTML, like Gecko) Version/4.0.3 Safari/531.9

Make sure that Firefox gets installed properly.
Open the DMG file and drag to Firefox program to the application folder on your hard drive.
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
See [[Installing Firefox on Mac]]
See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

Hi, I use two email addresses within one account with gmx. I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

Hi, I use two email addresses within one account with gmx.
I created one account with the first email address now. How do I add the second one to this account?
Now it looks like this.
One account was opened with address A.
I receive in this account emails for address A and B.
But I can only write and answer with address A.

Hi Rudegar,
Sorry for my late reply.
It s not the amount of accounts I'm struggling with.
When I create now for both email addresses one account, then I receive the same emails two times.
That is not what I want.
Because on gmx the two email addresses have the same inbox and outbox.
E.g. I can login to my gmx account either with email A or B. It doesn't matter.
Now I want to have the same on my ipad.
One account with both email addresses.

Why is there a thin dark line between two of my three cover images that wasn't there before? When I delete the images, you can tell that there is extra space between the first two image boxes.

Getting ready to purchase my first book, I looked over everything once more and noticed that there is now a thin gray line between the first two of my three cover images. I believe this may have happened when I switched out the left image. When I delete the images, you can see an extra space between the center and left image boxes. How can I fix this without starting over?

What size book? Are you previewing this way -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

HT203167 Hi, I recently bought a book (Jeffrey Toobin, The Oath), and the last page of the first two chapters, at least, are missing. Could you advise?

Hi, I recently bought a book (Jeffrey Toobin, The Oath) through iBook on my iPhone, and the last page of the first two chapters, at least, are missing. Could you advise?

Nothing no one here can do. Call the place where you purchased the book from or contact the book author!

Can you create an iTunes U Private Site?

Can a non-profit create a private iTunes U site for employee education and training?

go to the store and get an iTunes gift card.
you can create an account using that instead of a credit card.

Creating a 1 page scrolling site - problems with the final section scrolling too far

I have created a 1 page scrolling site that works fine apart from the final section, which scrolls too far. My site is made up of a pinned headr, a pinned footer, and 4 sections (defined by rectangles - each one 1011 pixels high). I have used scroll effects to bring the items in and out.
The site can be viewed here: Home
The problem is with the contact us section, where you seem to be able to scroll further than the bottom section.
These are my document set up settings:
so my height is set to 4042 (though I have tried it with 4044 - 4x1011 - it makes no difference. When I click on the link to the contact section it looks fine, but I then seem to be able to scroll further down, and this seems dependant on the monitor / browser size. The problem is more pronounced with a smaller monitor / browser size in height.
I have tried everything I can think of to make it not scroll beyond what the anchor takes it to when I click on the link, but whatever I do the problem seems to persist.
I would welcome any suggestions on this, and also any general feedback on the site. But help with the problem first please.
Many Thanks in advance - I would be happy to post the muse file but cannot seem to find a way to do this.
Ian

Thanks for the help. Is there a way that I can upload the file for someone to look at - I have tried your suggestion but cannot find any empty text boxes or anything at the bottom. I have gone top right and tried the upload file section but it tells me that I am not allowed the create the content.
Actually i'll put it in dropbox and share it that way.
Dropbox - YESS2.muse
Hopefully someone with more knowledge than me can see what I have done wrong - it is my first time doing a 1 page scrolling site so it might be a school boy error
Cheers
Ian

I want to erase a site so that it isn't the first thing that comes up when I type into the url line

Every time I type into the URL a specific site is the first thing up. I would like to erase this site. I have tried clearing the history, doesn't do any good. I visit google 20 times a day but still this site is first everytime I start to type "g". How do I :
1) erase my preferences on the url line that pop up
2) better yet how do I get rid of the one offender from the list that pops up.

If that site has a star at the far right then it is a bookmark and you need to remove that bookmark by clicking the star and click the remove button. If the entry is not a bookmark then highlight the entry in the drop down list and press the Delete key.
See http://kb.mozillazine.org/Deleting_autocomplete_entries

I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

TS1717 Hi i just rent a hd movie e i just could see the first ten minutes because occure a error this is the second time and you have charged the both movies i couldn t not see

hi i have rent couple of movies and two of them occur a error in the first 10 minutes and i could not see who s gonna pay my rental this is really unfare i pay for the movies and the download have stopped

lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport

HT4818 Why can't you create a Windows USB on a computer with an optical drive because my optical drive has failed

I get my USB and my Windows 7.iso but when I open bootcamp the option to create a Windows USB is not clickable. Please help because my Optical Drive doesn't work.

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

If you create a 3 level deep site heirarchy (with the first two levels based on the document centre template) the sharepoint OOTB breadcrumbs break

Similar Messages

Maybe you are looking for