If you have a Slingbox and an Xbox 360, this will solve 360 connection prob

I got my TC on Wednesday of this week and starting hooking everything up. I had a PS3, Wii, Xbox 360, Printer, and Slingbox Pro that I wanted to hook up. Slingbox, PS3, Wii, and Printer all work fine, but the Xbox would not cooperate as many of you have found out. So, I took my old linksys router that I was not going to use anymore, turned off its wireless functionality, so it simply acted like a signal pass through with multiple ethernet outputs. I unhooked the Slingbox from the part I speak of below, and attempted to use the linksys to split an incoming signal to the Slingbox and the Xbox 360, which ended up working like a charm.
When I bought my Slingbox, I knew it was not going to be able to be close to my router, so I purchased one of their additional products (links below to products) call the Sling Link Turbo. Most of you are probably aware of this but for those of you that are not, it is a neat device that sends your internet signal through the electrical wiring in your house to a different location where it is plugged in another wall outlet. The catch is that both plugs have to be directly into a wall, it cannot go into a power strip or surge protector. I had this product by default on Wednesday and it helped me fix the problem, so it might benefit those of you that are interested to pick one up, the single port is not that expensive.
http://www.slingmedia.com/go/slt
http://www.slingmedia.com/go/slt4
Moving on now, I connected the Slink Link Turbo to the back of the TC and plugged it in. Then I plugged its counterpart into the wall behind my TV so it could sit next to the Slingbox on top. I then ran an ethernet cord from the Sling Link Turbo to the WAN port on the Linksys router behind the TV. Then I ran an ethernet cord from the output ports on the linksys to the Xbox 360 and another cord to the Slingbox.
This is where things got tricky because I had to forward the ports in order for the slingbox to work. I set the TC to reserve the IP 192.168.0.200 for the Linksys router. I set my linksys router to be have a static IP at 192.168.1.200 (not a typo) and I set the DNS Server to 192.168.0.1, which is the TC's router IP. Then I set the port forwarding on the TC to open port 5001 to 192.168.0.200 on all ports, Public and Private UDP and TCP. Then I set the Linksys router to open port 5001 to IP 192.168.1.253, which is the Slingbox.
Do not set any static IP for the Xbox 360, it works great without it and if you set it it probably is not going to work.
Now, hold down the reset button on the Slingbox for 20+ seconds to reset it completely, run through setup, takes about 3-5 minutes, and make the IP address 192.168.1.253 and leave the other settings as is. If it will not work, change the router to either IP 192.168.0.1 or 192.168.1.1, whichever one it did not show up as wanting to be. Then make sure the port is 5001 and you should be good to go on the Slingbox even remote viewing. If you have problems here, pop me an e-mail.
Now for the Xbox 360, plug it in, turn it on, test connection settings, it should work perfectly on all accounts, mine has so far.
I now have a PS3, Wii, Printer, Xbox 360, and Slingbox Pro running on the N connection, I did not have to downgrade the settings to b/g for the Xbox 360 to work. However, my linksys router is old and only supports G, so I'm not sure if my N signal translates through to the Slingbox and Xbox, but they still work great. And the rest of my house can use the N signal with no problem.
If you have any problems please e-mail me and I will try to help as much as I can.
Good luck.

I have a question which I'm hoping you can answer. My dad lives in the states and has a slingbox connected. I live in another country and watch american tv through internet (i.e. through the slingbox he set up). I also have an xbox 360, which is connected to the TV in the living room. Do you know if it's possible to wirelessly stream the computer content (i.e. the slingbox content) to the tv in the living room through the xbox?
Thanks
Netta

Similar Messages

Maybe you are looking for

  • How do I convert my file to Microsoft Word?

    How do I convert my file to a microsoft word document?

  • FRM-40209 Field must be of form . - for a non-based text item

    Hello, When I try querying using a VARCHAR2 non-based text item in a table-based block, setting dynamically in PRE-QUERY trigger the DEFAULT_WHERE property for its block, in case I use characters > or < (for bringing values greater or smaller than th

  • App authorization (over and over and over)

    Since updating to IOS5, every couple of days my iTunes tells me that my apps are no longer authorized for this computer.  I have tried everything I can think of to get this to stop.  I have tried: Re-authorizing from the pop-up window from the error

  • Chain removed from Scheduling,

    Hi All We have a process chain for Loading master data text which falis every few days and logs suggest the chain was removed from scheduling. In system logs - (SM21) During the values check for background processing, the attempt to     generate a un

  • Customer consignment stock ason date

    Dear All, Can anyone suggest me on how to find out the backdated customer consignmnet stock. I am geting this stock from table MSKUH but being history table i dont want to use it. Is there any otherway how I can find out the customer consignment stoc