If you have LR5 but not on CC (got it as upgrade in 2013 be4 merge), how to get LR6?

I had just bought LR4 and then within days LR5 came out…got an upgrade-virtual, no box. I believe this was be4 CC was created…like 5 or6/2013. Anyway, don't have photoshop, but see new LR6. How do I get this upgrade, or do I now have to buy the whole ~$10/mo CC?….I like LR, photshop, not so much, so really didn't want to have to pay ~$120/yr for part of something didn't want.
Cathy

Full and Upgrade are the same product, but the Upgrade version costs less, and requires that you own a prior version of Lightroom. On the above page, when you select Upgrade, there will be a drop-down menu right underneath to indicate which prior version you own (you should indicate the last FULL version of Lightroom you owned, not your last Upgrade. Assuming you bought a full version of Lightroom 4, that would be the one to choose.) Regarding the prior version serial, you should be prompted for that during the Lightroom 6 installation process. You won't need to enter it on the above page.

Similar Messages

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

Does anyone know how to make one email account alarm you when you have mail but not all of your accounts?

I have a specific email account that I would like to alert me when an email has come in but I don't want all my accounts to alram me. Does anyone know how to do this? I can only seem to find how to alert EVERY account.

There is no way to do that on a non-jailbroken iPhone.

TS1292 I put the code in correctly but it says, "The Gift certificate or prepaid code has not been properly activated." or "The code you have entered has not been recognized as valid." Help ?

I put the code in correctly but it says, "The Gift certificate or prepaid code has not been properly activated." or "The code you have entered has not been recognized as valid." Help ?

You will need to contact the iTunes Store.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Purchase Requisition action have submit but not forward(is null)

Dear all,
Purchase Requisition action history have "submit" but not "forward"(it is null), and PR header status is "In Process", why? please help me, tks.
Regards
Edited by: user3392434 on 2012/2/15 下午 9:51

user3392434 wrote:
Dear all,
Purchase Requisition action history have "submit" but not "forward"(it is null), and PR header status is "In Process", why? please help me, tks.
Regards
Edited by: user3392434 on 2012/2/15 下午 9:51which approval process are you using in your system??
Thanks
Mahendra

My photos on photo stream on my phone have transfereed but not all have gone to my laptops photostream. help

My photos on photo stream on my phone have transfereed but not all have gone to my laptops photostream. help

How many photos are you trying to add to the stream? There is a limit of 1000.

Model Number you have entered is not listed in our database. windows 7 upgrade

i have purchased a Compaq Presario cq61 on the 24/07/09 (uk date) it came with vista home premium and it is in the eligible list on the hp support site for the windows 7 upgrade, but when i enter my serial number and product number into the arvato site, it says "We are sorry, but the Model Number you have entered is not listed in our database. " i cannot see how this is possible as i meet the specifications to be able to upgrade to windows 7, what do i do?

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

The volume you have selected may not be extended

I just added a new hard disk to our Windows 2003 R2 server with SP2. When I try to extend it, I receive "The volume you have selected may not be extended". kb841650 has been installed. What could be the problem?
C:\Documents and Settings\Administrator.PAYROLL>diskpart
Microsoft DiskPart version 5.2.3790.3959
Copyright (C) 1999-2001 Microsoft Corporation.
On computer: HSA-COMM02
DISKPART> list volume
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 0     C                NTFS   Partition    128 GB Healthy    System
Volume 1     E   New Volume   NTFS   Partition    105 GB Healthy
DISKPART> select volume 0
Volume 0 is the selected volume.
DISKPART> extend
The volume you have selected may not be extended.
Please select another volume and try again.
DISKPART> select volume 1
Volume 1 is the selected volume.
DISKPART> extend
The volume you have selected may not be extended.
Please select another volume and try again.
DISKPART>
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

what is your aim ?
You can only extend volumes on the same disk.
Example: You have a disk of 100 GB, and you create a volume of only 50GB. You can extend this disk up to the remaining 50 GB in the same disk. You cannot extend a volume to use another disk.
In your case, your two volumes (Partitions) are using the full disk space, so you cannot extend.
If you want to aggregate two disks, you have to use a striping tool like to have RAID0 for example. But only when you are dealing with new disks.
I guess you are using virtualization. So you are attaching VHDs (Hyper-V) or VMDK (VMWare).
To extend a VHD, backup first your machine (Make a copy of the VM VHD or VMDK)
Use a tool to extend this VHD (or VMDK)
Then when you start your VM, you will be able to extend, becasue you extended the entire disk, and you will find available space where to extend
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

ITunes opens but without any text showing. Drop down menus have text but not the app itself. I have a Mac Powerbook Pro running Windows XP under Boot Camp.

Running under Windows XP, a few upgrades ago iTunes started opening without any text showing in the application. Clicking on PLAY will play music but no text shows to indicate what's playing and no text to show music library. Drop down windows show text but not the app itself.
Subsequent upgrades and reinstalls have not corrected the problem, When I run under iOS (Snow Leopard), iTunes opens with text and runs correctly.
Help!

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

CS4 Upgrade, the serial number you have entered does not match the product you have selected

I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

It does not magically appear in a new place. It will only be where you put it.
Copy everything from your old computer, or your backup copy of your old computer, to your new one.

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

If you have LR5 but not on CC (got it as upgrade in 2013 be4 merge), how to get LR6?

Similar Messages

Maybe you are looking for