If you install Windows 8.1 on a Lynx can you go back to Windows 8 ?

If you install Windows 8.1 on a Lynx and do not like it can you reinstall Windows 8 from your recovery partition? On the Windows site it says After you install Windows 8.1, you won't be able to use the recovery partition on your PC to go back to your previous version of Windows. Thanks so much Tom
Solved!
Go to Solution.

Hi, hope this can help -
http://download.lenovo.com/lenovo/content/windows8-1/upgrade/ideapad/index_en.html
Check section 5 - Recover system back to Windows® 8

Similar Messages

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Can you install Windows 8.1 Pro using Parallels on a new MacBook Pro without retina display?

I am starting a graduate school program and I would like to purchase a MacBook Pro. The options for the non-retina display fit my needs best, but it sounds like the resolution requirements for Windows 8.1 Pro do not match the MacBook Pro without retina. I need Windows to run a statistics program (SAS) and ArcGIS for mapping. Any thoughts or experience installing Windows 8.1 Pro on MBP without retina?

The native res on my 13-inch non-Retina is 1280x800. You might check with Parallels support or their forums to see if this is a problem.
If you go with the non-Retina 13-inch, I'd recommend getting 8GB RAM (standard is 4GB) because Win emulators need a fair bit of memory.

How do you install Windows 8.1 on a system with multiple hard drives?

Specifically a system with a User folder located on more than one drive. I have programs installed on both drives in order to save space on one (a small SSD boot drive). Upon trying to install windows 8.1, the Windows Store tells me my PC can't run Windows
8.1 and gives me the error 0xc1900102. Suggestions?

Got it working :D... But it eats some time tho...
First run a cmd with admin privileges.
Then mklink /j C:\Users D:\Users
(Change D if you have users on other drive)
Now follow this guilde untill the profiles directory
http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html
Change it to %SystemDrive%\Users
Finish the guide and let it do its thing. (This will leave your Users map on the HDD)
Now activate the Administrator account
http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windows-8-a.html
Remove the mklink of C:\Users. Then copy the (hidden) Default User profile from D:\Users to C:\Users (yes create Users on the C partition)
Then log off and log in as the admin account.
Create a new online account (get an alternate email or make an account alias at https://account.live.com/summarypage.aspx)
Log in with that account.
Download and install the windows 8.1 Upgrade and let it finish everything (Took 3 hours at me)
Then login with your main account. It will generate a new account.
Restart your PC and login with the admin account.
Goto C:\Users and look what name it got. If the name is crappy then you can rename it at:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\<your profile ID>
Then do a mklink /j C:\Users\<ProfileName> D:\Users\<ProfileName>
Now restart the pc and login on your main account.
If everything went well you will have your old account back.
Now you can remove the C:\Users map and do a mklink /j C:\Users D:\Users
P.S. My store doesn't work anymore after this...

Will it work to install windows 8 through bootcamp as in bootcamp it says you must have a genuine copy of windows 7 home premium, xp or vista and windows 8 is not listed?

I have recently spoken to apple care and they are ringing me back in the morning but I want to try and progress as far as I can before hes does. I have managed to partition my disk but before I go any further it says you must have a genuine copy of Windows 7 home premium, professional or ultimate.
I have windows 8 and this is not listed here. will it work?
It is quite an old mac but running 10.6.8.
Please help
Thanks
Vicky

Welcome to Apple Support Communities
Windows 8 also works, but only with compatible Macs > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US Note that you can also install Windows 8 in non-supported Macs by Apple, but you will not be able to install the Windows support software.
As you have got Mac OS X Snow Leopard and after checking that your Mac supports Windows 8, you need to download the Windows support software from this website > http://support.apple.com/kb/dl1638

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

How to Install Windows 7 or 8 to Imac if you have never owned these OS's before?

Hi Guys / Girls.
I hope someone can help me.
I recently bought a new Imac (no optical drive). My OS is Mountain Lion.
I have seen many topics / videos on how to install Windows 7 or Windows 8 on my Imac, however I have a problem!
I don't own a copy of Windows 7 or Windows 8.
Where can I buy and download it legally?
I tried the Microsoft website, but I can't find windows 7?
The download for Windows 8 is only an upgrade if you already have Windows 7.
Is there a way that I can buy and download the full version of Windows 8 without Windows 7?
Or can I download Windows 7 from somewhere?
The other option I have is I have an old Windows XP installation disc.
Can I some how bump this up to Windows 8 and then use bootcamp to install to my Mac?
I'm not sure which will be the best way to install the new Windows 8 to my Imac.
Thank you in advance for your help.

Well, a lot of questions here.
The reason you cannot download Windows 7 from Microsoft is that they discontinued it as a download in December 2012.
There are places you can download Windows 7 but probably not 100% legal - so I won't say anything more about these. However, you can still buy genuine versions via Amazon.
As you say, a full (non-upgrade) version of Windows 8 (actually 8.1 now) is not available from Microsoft as a download. Even if it was, it would be $200+
I suspect that your most economical option is to invest in a cheap USB CD/DVD drive to connect to your iMac and install XP under Boot Camp to see if you like the way it works. You could then decide if you want to upgrade.
You can upgrade to Windows 8.1 (about $120 for upgrade) from XP either by download or buying the upgrade discs - cost will be similar and if you already have the drive, then it will be straightforward installation. Again, copies available via Amazon.

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

How do you install windows 8.1 on a macbook pro? And do i buy the windows 8.1 package from windows or is there a specific one designed for a mac?

I have ordered a new macbook retina pro with 256gb hardrive, i7 processor and 16gb ram. It still hasnt arrived become im ordering it overseas however when it arrives i want to download windows 8.1 on it and i need some help please!

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

Acius wrote:
Crjohnson, I think you can really help me!
Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
What is crossover? Is it another wine app?
Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
You probably cannot afford to buy Crossover either. It is designed for user friendliness though, but of course Wine cannot run everything.
Yes you have to learn some things to use Wineskin. Normally on Gecko and Mono prompt, just cancel them. Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it). Mono is a replacement for .NET if your program requires that. You do not want to install them if you don't need them as they will just waste space. You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go. Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

Can you use and iso version of windows 7 64 bit to install windows through bootcamp?

I saw windows 7 64 bit online cheap and it was and iso. If I put it on a disc, could I use it to install windows through bootcamp?

You can use the iso direct from Bootcamp assistant and put it on a USB if your Mac has the ability to boot from a USB flash drive.
If your Mac has a built in cd drive you will need to burn the iso to disc (as an image) and use that to boot from.

Can you install Windows 7 from an *.iso file on the Bootcamp partition?

G'Day Everyone,
I have an ISO disk image on my Mac hard drive. (en_windows_7_professional_with_sp1_x86_dvd_631025.iso)
Has anyone had a successful experience installing Windows 7 from an ISO disk image rather than from an installer disk?
If so, what's the process?
Thanks and Cheers,
Rich

I'm running Boot Camp 3.0.4 on Mac OS 10.6.8
Here's what I see:
Screen One
Screen Two:
Screen Three:
I don't see the screen you shared!! :-(
What version of Boot Camp Assistant are you running? What Mac O?
Thanks & Cheers,
Rich

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

How do you install windows bootcamp on a second internal hard drive?

I have a SSD as my main hard drive then installed the old hard drive internally in the internal optical bay slot. Whenever I try to install Windows and reboot, I get the No Bootable Disk error. Any ideas?

Disconnect the hard drive (assuming you want to install on SSD) and put the optical drive back.
Even on a multi-drive Mac Pro (tower) or an iMac (with SSD and 2TB hdd) there are extra steps.
You can't install Windows on one and have a drive with OS X or even GPT partition type on second.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

If you install Windows 8.1 on a Lynx can you go back to Windows 8 ?

Similar Messages

Maybe you are looking for