If you need to send more than one document via email to a recipient with a PC, how do you convert them to a Word or PDF before sending them in one email?

When trying to send an email to a PC user and need to send multiple documents, in the old version of iPages, you could save the document as a Word or PDF file then attach them to the email. I don't see how to do this with the new version. Therefore, the only way I can see to accomplish this task is to go to each document and send them individually in another version. Otherwise, the PC user will not be able to view the documents - correct. There must be a way to convert and save the documents like before so numerous documents can be sent at once. Please help!
Melody

What fruhulda said. In addition, in the Mail composition window, I recommend that you select the paperclip icon from the Toolbar, and enable Send Windows-Friendly Attachments.
You can also select multiple files in the Finder and drag them onto the composition window. In my experience, the documents resist an iconic state, so right-click on just one, and choose View as Icon from the contextual menu. This will transform all attached documents into icons.
If you want to send just one document from within Pages v5, use the Share icon in the Toolbar and select Send a Copy > Email. You can then choose PDF (and its image quality), or Word (.docx default, or .doc) document formats that will be attached as an icon in a new pop-up Email composition window.

Similar Messages

Need to maintain more than one address for single customer.

Dear All,
I need to maintain more than one address for single customer, Is it possible? If so how can I maitain kindly send the details.
Rgds
Srinivasan.K.R.

Dear Srinivasan,
I don't think you can maintain the more than one address for single customer as per the standard.
You can this options
1.You can create different ship to parties as per the addresses.
2.You can change the address manually while creating sales order for single customer.
I hope this will help you,
Regards,
Murali.

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
Thank you!

Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

ITunes says it needs to make more than one Audio CD, but then stops.

Most times when I try to burn a CD from a playlist, 'The songs will not fit onto one disc' box appears. I click on the 'Audio CDs' button, but it doesn't do anything after that. It doesn't try to burn the CD after I click the button. What do I do about this?
PLEASE HELP! obviously
Thanks
Dell Dimension 4600 Windows XP

Instead of trying to update iTunes +from within iTunes+, go to Apple's page where you can download the iTunes 8.2.1 installation file -- save the file, don't run it direct from the download. Once downloaded to your computer, then run the installation file.
If that does not fix the problem, then remove the following software from your computer (you won't lose your music): iTunes, Quicktime, and something called "Apple Mobile Device Services". Once you remove those programs, then run the iTunes installer file (from above) again. That will install all three of these programs and should fix your problem.

How do I convert/merge multiple files (word and PDF) into one PDF?

I have multiple word docs and PDF files that I need to merge into one file. How do I do that?

You should be able to do it in the image processor.
File > Scripts > Image Processor
If it doesn't have the options you want, then make an action using "Save for Web", then run the action on a batch of files using
File > automate > batch
Select your action from the dropdown menu.

HT1206 I have a computer with 2 users and each of us have I tunes authorized but only one of us can cloud sync our purchases what can I do I need more than one ID available

Help please I need to have more than one Itunes Id

Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App

Can we query more than one class in a call to .tmib

Hi,
i am creating a utility to monitor the applications at run time using mib.any
body have an idea if we can query more than one class in one call to .tmib.
thanks
roopesh

That would be an interesting enhancement, perhaps using Embedded FML to
pack multiple MIB requests into one buffer.
Product Management makes all decisions about major enhancements, and it
is based on customer need, so that's where the requests should go.
Scott Orshan
roopesh wrote:
>
yes.
i am trying to devlop a utility which can monitor
applications at runtime.i wanted to make as less the
no of calls to tmib as possible but one class does
not give all the information so i need to query
more than one.
anyways thanks for the reply.
"MS" <[email protected]> wrote:
Hi,
Are you trying to write a Tuxedo app health-check monitor utility.
A tuxedo client can make different calls to .TMIB service for different
classes.
I don't think we can query more than one class in a single call.
Are you looking for something else??/
HTH
regards
MS

Attach more than one Mail Message to iCal Event

Hi,
I need to attach more than one e-mail message to an iCal Event. I can drag and drop one onto the url when I edit the event, but if I try another it replaces it. Any ideas?

You can only attach one Numbers to a Email.

How to view more than one file at a time in CS4?

With OS 10.5, and a brand new CS4 Photoshop, I can open many Photoshop files at a time, but can only view one at a time. Must choose one at a time from the "tab". I need to have more than one picture open and showing at a time to work on them. How can I do that? What have I missed? Who can help? Thanks!

"Here's the smart way for all of you on macs. Set up Exposé and a keystroke for 'Application windows'. Then with the press of a single key you can visualize, and swap between documents very easily. By I single keystroke I mean something like Right Control.
Tabbed documents have hardly any genuine advantages for mac users, yet another example of interface decisions in the stupid direction."
This is what I've been saying since I first saw the tabbed view in the new CS4. On the Mac, tabbed view is a big step backwards as it actually breaks the superior Expose' method of viewing multiple windows and also switching among them. I would also add that Control/Tab for non-tabbed windows is actually slightly faster than when they are tabbed. So for the mac, I only needed a minute to decide that the tabbed view was merely change for the sake of change. There are also operations that I do where I have to recreate a piece of art to match an existing piece. In those situations I always have the original right next to the the new image. Tabbed view destroys this as well. So I don't use it.
For the PC, tabbed views is possibly a tiny step forward, but it's such a small step that I'm not sure if I prefer to use tabs, or have that small amount of screen space that the tabs use. There was no previously existing "good" method of viewing and moving among multiple windows of a single application on the PC and therefore, tabs might be a small improvement. Unfortunately though it does seem that in order to bring us tabbed views in CS4, Adobe had to slightly 'break' the regular floating windows view. On the PC the documents will actually float above the toolbars, palettes,etc making it very difficult to use if not impossible. So, if you don't like using tabs, then you are really gonna suffer with non-tabbed view or suffer with the tabbed view. On the Mac, it's the opposite problem. Documents actually float up and underneath the top toolbar, covering the "close, maximize, minimize" buttons. Generally I would say that Adobe has created a mess when the best solution was obvious. Adobe should have copied the expose' method for it's CS4 suite. Hopefully they will have enough feedback with CS4 to see the light and change it for CS5. I see that Microsoft has mouse software that has already done just that on the PC, and there are a handful of independent efforts attempting to come up with something like expose' but generally with far less elegant and less "perfect" results.

Unable to minimize windows or view more than one window

I had a MacBook Pro prior to the MacBook 2015. I never had a problem minimizing windows. I really need to have more than one window open at same time, but I can't seem to do this with MacBook. There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window. There is an icon with double page symbol I can click in the right corner, but when it shows a thumbnail image of each website on one page instead of minimizing the window when I click on it. Is there something I can click on to minimize the window so more than one window appears at the same time? I do not even see line/arrow appear in corners of window to drag the window to a smaller size.

I do not even see line/arrow appear in corners of window to drag the window to a smaller size.
Just put your cursor on any edge or corner of a window until you see the double arrows then click and hold while you drag to resize. This is no different than it's been for the last 4 years since the introduction of Lion.
There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window.
The yellow dot will minimize the window to the Dock.
http://www.peachpit.com/articles/article.aspx?p=412362&seqNum=6
In Yosemite, a click on the the Green dot goes to full screen, an Option click is like the prior green dot's performance.

Methods that return more than one object.

Hello everyone,
I don't know if this has ever been proposed or if there's an actual solution to this in any programming language. I just think it would be very interesting and would like to see it someday.
This is the thing: why isn't it possible for a method to return more than one object. They can receive as many parameters as wanted (I don't know if there's a limit), but they can return only 1 object. So, if you need to return more than one, you have to use an auxiliary class...
public class Person {
   private String name;
   private String lastName;
   public Person(String name, String lastName) {
      this.name = name;
      this.lastName= lastName;
   public String getName() {
       return name;
   public String getLastName() {
       return lastName;
}So if you want to get the name of somebody you have to do this, assuming "person" is an instance of the object Person:
String name = person.getName();And you need a whole new method (getLastName) for getting the person's last name:
String lastName = person.getLastName();Anyway, what if we were able to have just one method that would return both. My idea is as follows:
public class Person {
   private String name;
   private String lastName;
   public Person(String name, String lastName) {
      this.name = name;
      this.lastName= lastName;
   public String name, String lastName getName() {
       return this.name as name;
       return this.lastName as lastName;
}And you would be able to do something like:
String name = person.getName().name;and for the last name you would use the same method:
String lastName = person.getName().lastName;It may not seem like a big deal in this example, but as things get more complicated simplicity becomes very useful.
Imagine for example that you were trying to get information from a database with a very complex query. If you only need to return 1 column you have no problem, since your object can be an array of Strings (or whatever type is necessary). But if you need to retrieve all columns, you have three options:
- Create 1 method per column --> Not so good idea since you're duplicating code (the query).
- Create and auxiliary object to store the information --> Maybe you won't ever use that class again. So, too much code.
- Concatenate the results and then parse them where you get them. --> Too much work.
What do you think of my idea? Very simple, very straight-forward.
I think it should be native to the language and Java seems like a great option to implement it in the future.
Please leave your comments.
Juan Carlos García Naranjo

It's pretty simple. In OO, a method should do one thing. If that thing is to produce an object that contains multiple values as part of its state, and that object makes sense as an entity in its own right in the problem domain--as opposed to just being a way to wrap up multiple values that the programmer finds it convenient to return together--then great, define the class as such and return an instance. But if you're returning multiple values that have nothing to do with each other outside of the fact that it's convenient to return them together, then your method is probably doing too much and should be refactored.
As for the "if it increases productivity, why not add it?" argument, there are lots of things that would "increase productivity" or have some benefit or other, but it's not worth having them in the language because the value they add is so small as to no be worth the increase in complexity, risk, etc. MI of implementation is one great example of something that a lot of people want because it's convenient, but that has real, valid utility only in very rare cases. This feature is another one--at least in the domain that Java is targetting, AFAICT.

More than one document in a Batch Input Session?

Hi to all,
I need to post more than one document with a Batch Input of MB1A transaction.
The user asked me to create only one session no mater how meny documents I've to post.
The problem is that when I run the record (SM35), when the first document is saved, the batch input finishes and the rest of de documents in the record can't be processed.
Does anyone knows if this is possible? or I've to create a new session for each document to de treated?
Thanks to all.
Nico.-

You should be able to post all documents in one session.
When you go in SM35 session, can you see multiple transactions in that session?
All transaction postings should happen within function 'BDC_OPEN_GROUP' and 'BDC_CLOSE_GROUP' in your program.
Cheers,
Vikram

Html check box pass more than one value into bean

Hi all'
I have group of check box in html , I need to pass more than one value
into bean an ddisplay in jsp
what do i do wrong
private Vector select =new Vector();
private String mybox =null;
public download() {
     again();
/* Accessor Methods */
private void addmybox(String name){
    select.addElement(name);}
public void setMybox(String name) {
     mybox = name;
public String[] getMybox() {
     String[] s = new String[select.size()];
     select.copyInto(s);
     return s;
        in my htmli have <%
     String[] mybox= format.getMybox();
     for (int i=0; i<Mybox.length; i++) {
         <%= format.getMybox%>
%>
i got error at <%= format.getMybox[i]%>

Hi ram,
thank you, I don't have ideal in my mide .
in my jsp I have
<td> <input type=checkbox name=mybox value=<%= link.getNewNum()%>></td>in my servlet I have something like
String[] checked = request.getParameterValues("mybox");
        try {
        conn = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433","A#$","RE@89");
        conn.setCatalog("sequences");
      stmt = conn.createStatement();
       for(int i=0; i<checked.length; i++){
               String select=checked;
String Sql=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec04";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from MySec";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec03";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec02";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec01";
Sql+=" where NewNum='"+select+"'";
rs = stmt.executeQuery (Sql);
while(rs.next()) {
String Name = rs.getString("Name");
String Segment =rs.getString("Segment");
String Length = rs.getString("Length");
String Sequence = storeSequenceData(rs.getString("Sequence"));
String SContent = Name + " ," Segment ", "+ Length + "\n" +Sequence ;
now I want
String SContent = Name + " ," +Segment + ", "+ Length + "\n" +Sequence +"\n" + Name+"Segment+","+length+"+"\n" +Name......untill the end
it sees like I need to look st on shipp car. is that right??
Thank you !!

How more than one MDB can be made to run in single transaction

Hi All,
I am working on EJB 2.0 with Application server as Websphere 5.0 and Messaging middleware as WebSphere MQ5.3
I am facing a design issue, I need to use more than one MDB in single transaction unit. Since an MDB can only run in transaction started by itself I am looking for some alternative approach
The problem in detail is as below:
Consider there is an MDB M1 listening on Queue Q1
Bean M1 reads Message (say msg1) from Q1, writes another message into Q2.
We have a mainframe system which reads message from Q2 does some processes and write it's response into Queue Q3.
Now we have another MDB M2 in same application server listening on Q3.
The requirement is if there is any ERROR in message at Q3, transaction started by MDB M1 should be rolled back and hence the message (i.e msg1) should be put back on queue.
Since trancation started by MDB M1 and M2 are independent I do not have any control to rollback M1 from M2.
Pls suggest me what alternative approach I can use.

I think if you are using container managed
transaction and have set the trans attribute to
"required" then MDB M-1 and MDB M-2
should have same container transaction.
wrong !
There is never a client transaction context available when a message-driven bean is invoked because a transaction context does not flow with a JMS message. [EJB spec. 2.0 15.4.7]
Nishant Saini
Daffodil Software Ltd.
http://www.daffodilsolutions.com
Nishant , you should have added this to you'r site:
Why India ?
India 's abundant human resources: a bunch of clueless developers !
:-)

If you need to send more than one document via email to a recipient with a PC, how do you convert them to a Word or PDF before sending them in one email?

Similar Messages

Maybe you are looking for