If you switch Junk Filter back into Training mode does this reset it?

If you have been using Mail's Junk Filter and switch it back into Training mode, does this reset it, that is, do you lose all previous training? Or does the data base only get reset via the Reset button?

It should just go back into training mode from that point without affecting anything.

Similar Messages

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

HT201263 iPhone restores and then goes right back into recovery mode

Overnight, my iPhone 4 went into recovery mode on its own. I plugged it into iTunes, which detected a phone in recovery mode and asked if I wanted to restore it. I went ahead and clicked restore and the phone went through the whole process. I received a notice on my PC saying that the restore was complete and to wait until prompted to unplug my phone. I never received a completed sign and the phone just goes back into recovery mode and I eventually get another notice saying that iTunes detected a phone in recovery mode.
Is there any hope for my phone or is it toast?

No one does. It's an iPhone 4. Totally and completely out of warranty. I use Straight Talk for my service carrier so I don't even have any sort of support from AT&T.
If I contact Apple, they will charge me $20 just to troubleshoot. Hence me posting in the community. I was hoping someone would have some further information that might assist me in determining whether there was any chance of getting the phone in working order again or if it is toast.
If the problem is hardware, like you indicated at first, it is most likely not even worth spending the money to have the hardware fixed (if even possible) because it is an iPhone 4, not under warranty, and pretty outdated.

5th Gen Ipod classic is stuck in a Restore loop. Every time I restore on itunes the ipod reboots back into restore mode. help!

5th Gen Ipod classic is stuck in a Restore loop. Every time I restore on itunes the ipod reboots back into restore mode. help!

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library

Can you get your photos back after the iphone does a restore

Can you get your photos back after the iphone does a restore?

Actually, wrong.
The tech support people can help with Playbook purchased apps. If you've called and they said they cannot, you were lied to.
Even in the link you posted, in #10, it states clearly "App Refund related matters are handled by BlackBerry Customer Care." That, my friend is accessed by the support number. Again, if you were told otherwise, you should inform them of such or ask for a manage/supervisor.
And, you don't have a "Partner ID" because you are not a "Partner". The section you're referring to applies to mobile providers, which are the Partners.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT2404 how do you get your money back for software that does not perform as advertised?

how do you get your money back for software that does not perform as advertised? I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

tell Apple. http://www.apple.com/feedback/
iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

HT201263 how do you put an iphone 4 into recovery mode

how do you put an iphone 4 into recovery mode

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
    If this method does not work, then you will need to fully Restore your
    device as New
Also, see iTunes- Restoring iOS software.
If none of the above do what you need, then do the following:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

HT4550 My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do i remove it

My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do I remove it.

Hold the shift key down and launch Safari.
If not, try suggestions made in this article.
http://reviews.cnet.com/8301-13727_7-57393558-263/tackling-macs-that-always-boot -to-safe-mode/
Best.

My iPad 2 goes back into recovery mode after restore is complete. I updated my iTunes to 12 before I attempted to restore.

I Hard reset my IPAD 2. It was showing connect to iTunes. I did and it prompted me to restore and update. It installed the software and said my iPad had been returned to factory settings and would restart but it never does. It just goes back into recovery mode and iTunes prompts me to restore again.

Yes but the apple logo won't appear. It just says connect to iTunes. When I do that it goes through the restore process again. Says it's been restored and my device will restart but it never does. Just goes back to the connect to iTunes screen.

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

I am trying to update itunes to 11.1.1.11 and i keep getting 'erreo writing to file : C\ : Config.Ms\301ded48.rfb.Verify that you have access to that directory'. What does this mean and how can i fix it?

I am trying to update itunes to 11.1.1.11 and keep getting message at the end ' error writing to file :c:\Config.Msi\301ded48.rbf.Verify that you have access to that directory'. What does this mean and how do I fix it?

I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

How do you get an app back into Launchpad?

I accidentally deleted iMovie '11 from my launchpad. How do I get it back in there? I have tried deleting the application from my computer and then re-installing it via the app store. When I tried this, the application icon was in launchpad when it was installing but after it had finished installing, it was no longer there. It is not in any other page on Launchpad either - I tried searching for it.
How can I get the application icon back into Launchpad?

You can try resetting Launchpad to defaults
https://discussions.apple.com/message/15941820#15941820
That should restore it to show all apps in your Applications folder.

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

If you switch Junk Filter back into Training mode does this reset it?

Similar Messages

Maybe you are looking for