If your database in Full Recovery mode, can you use Bulk Insert Task to load data

If your database in Full Recovery mode, can you use Bulk Insert Task to load data

If your database in Full Recovery mode, can you use Bulk Insert Task to load data
Yes you can ofourse but dont be in idea that logging will be mininal. Loggign will be as per recovery model full. Every thing will be logged. If you are going to use bulk insert task you can consider switching recovery model to Bulk logged but you will not
have option to do point in time recovery.
PS: please dont create duplicate threads
If you read first Note section in below link it clearly states that yes logging will be full and you can use
http://technet.microsoft.com/en-us/library/ms191244(v=sql.105).aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Similar Messages

  • HT4972 3gs wont boot up into 'recovery mode' can you help

    Hi.
    I try to put my 3gs into recovery mode but it just starts the phone as normal, as if 'recover' is not possible.

    Not only will the warranty be void, you will have given up your ability to get a discounted out of warranty replacement phone.
    If you still can't get it into recovery mode, try DFU mode: http://www.iclarified.com/entry/index.php?enid=1034
    If that doesn't work, make an appointment at the genius bar.

  • Can you use SQL Developer against non Oracle data bases?

    If so, then how do you define the connection for non Oracle data bases?

    Look, SQL Developer has got to be a 'gateway' into Oracle DBs from other databases. JDBC allows simple introspection and execution of SQL commands. So the 'explain' button won't be available, or some of the DDL stuff, big deal! Let them get a taste of what they are missing by not having an Oracle database.
    If we can get non-Oracle developers (especially MS SQL Server) to use SQL Developer it will expose them to the superiority of the Oracle DB server.
    If they have heterogenous services installed they are already an Oracle customer -- we have little additional DB server sale opportunity there. SQL Developer is a really sweet tool and it could be a real draw into the DB server sales.
    SQL Developer must be easily usable by non-Oracle customers in order to help us sell the DB server to them!

  • Can you use an image button to load a CFWINDOW?

    Is it possible to use an image to open a cfwindow instead of
    a regular button input type?

    All I had to do was to use a regular link instead of using
    the input tag. This is because the OnClick event can be used in a
    input that has a type of button and on regular "<a href..."
    links. However, you cannot use the onClick when you have an input
    type of image.

  • HT4260 Airport in Bridge Mode - can you use its ethernet to connect other devices?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport? I prefer using a wired connection for Roku as wireless is very wonky most of the time. Will that work?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport?
    Yes

  • IPS Inline Interface Mode - Can you use a port-channel?

    Hi,
    I'm trying to determine if you can have a 2-gig Layer-3 Port-channel going thru an IPS 4260 appliance. See attached diagram. Is this possible?
    The client I'm working with would prefer not to break this Port-channel into equal-cost 1-gig links (I don't think there will be any performance difference...) However I'm thinking if they want the appliance inline like the diagram shows - they will need to break the port-channel. Is that a correct assumption?
    Thanks,
    Brad

    Yes this is possible.
    It will require 2 InLine Interface Pairs on the sensor and both pairs should be added into the same Virtual Sensor.
    The 4260 will not be aware that etherchannels are used on both sides, and does not need to be aware.
    This may,however, require manual enablement of the etherchannels.
    Also keep in mind that the performance in this setup will be limited to what the IPS-4260 is able to perform with that traffic.
    If the IPS is only able to monitor 1 Gbps (which is its rating for Transactional traffic tests), then having the 2 InLine Interface Pairs will not give them any more performance than a single pair would.
    If the IPS is able to monitor more than 1Gbps of their traffic (it is rated at 2Gbps for Media Rich tests), then the additional pair will allow the sensor to get to the above 1 Gbps monitoring.
    If the 4260 is not able to keep with the traffic, then an upgrade to a 4270 using the same deployment setup may be necessary.
    NOTE: This also assumes that only the left or right path are actively passing traffic at any one time. If both paths are passing traffic, then asymmetric traffic patterns can result. if asymmetric traffic is seen, then another deployment should be considered, or specifial configuration be placed on the sensors.
    NOTE: This setup only works when a single sensor is used within the etherchannel. (1 sensor on each etherchannel, 2 sensors in your diagram because you have 2 etherchannels).
    You can not place 2 sensors in the same etherchannel (would mean 4 sensors in your diagram).
    This is because the balancing being done from the lower switch can not be guaranteed to match that being done from the top switch. A mismatch in balancing could lead to asymmetric patterns.
    With a single sensor, the same virtual sensor sees all traffic regardless of which interface the packet comes in on, so a single sensor is fine. But with 2 sensors, the client traffic might get sent to a different sensor than the server traffic.

  • If your iPod charger port is broken, can you use a wireless charger?

    The little orange thingies inside of my ipod 4th gen charger port are bent, can i charge it using a wireless charger tht you set the device on top of ?

    No.

  • My iphone 4s was loading a software update and went into recovery mode, I don't want to lose all my data please help me@!

    I was loading the latest software update to "fix bugs and security issues" and my phone went into "recovery mode".  I've never seen this before.  I plugged it into iTunes as shown on the screen of my phone and it says "Iphone in recovery mode detected" and suggested resetting the phone to factory settings. I don't want to lose all my data so is there another way to fix it?  All help will be appreciated!

    Sorry, whatever data you had on your phone has been wipe off already, since your phone is in recovery mode.
    You will need to restore your phone.  Then if you have a backup, you can choose that backup to restore from, if you have no backup, your only option is to sync contents from iTunes.

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • What is impact to MDF file size if change database to simple recovery mode

    Hi,
    Currently I have a Database with 27GB MDF and 80GB LDF.
    If I change from Full recovery to Simple recovery mode, would LDF information be transfered to MDF file and make
    MDF file size exceed 100GB?

    Hi
    May I know how to perform point in time recovery? Currently the only backup we perform every 4 hours is the server OS snapshot.
    Example :
    1. Now is 6pm and some error transaction occurred.
    2. We can perform 3pm server OS snapshot recovery on the mdf file. ( We would lost 3 hours data in this case )
    3. Could we apply the ldf transaction log after OS snapshot recovery and roll it forward till 5:50pm?
    You would be able to perform point in time recovery if you have
    1. Database configured in full recovery mode
    2. You were taking transaction log backups.(of course with full backup or may be differential)
    In your scenario applying snapshot wont help you.What you have to do it you should have full backup in place .If you had full backup ,like full backup at 3 PM then you would have restored it with no recovery.After that suppose you took tansaction log backups
    every on hour then restore 1 PM ,2 PM and 3 PM log backup all in nore covery.
    Now i should have mentioned first but before restoring full backup you can also take tail log backup read this article
    http://technet.microsoft.com/en-us/library/ms179314.aspx
    So now after full and all log backups are applied with no recobery apply tail log backup with recovery and its quite possible that you might not have a data loss or in some scenario very small data loss( not 3 hrs as you would have with snapshot)
    hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."

    Went on a Vegas trip on Sept
    11th.  My iPad worked fine
    before getting on the plane. In the hotel about 48hrs later I opened my iPad it
    read the message: “iPad is disabled,
    connect to iTunes.”
    To my knowledge myself, nor anyone else has tried to access my device or
    entered the password incorrectly 3 or more times.
    I started by updating my iTunes account on my computer to the latest version.
    Then multiple times I attempted
    the “Use recovery mode”
    steps.
    e.g.
    1. Turn off your device and leave it off.
    2. Plug in your device's USB cable to a computer with iTunes.
    3. Hold down the Home button on your device as you connect the USB
    cable. Keep holding down the Home button until you see the Connect to iTunes
    screen.
    I received the message on my computer saying “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”
    I click the “Restore iPad” button.
    During which time the progress bar on my computer’s iTunes
    screen was moving very slowly and other times seemed like it wasn’t moving at
    all. I would leave my two devices and attached by the cable and upon returning
    I would find that the process would have ended before it had completed.
    Initially I thought it was a connections issue because I was in remote
    locations with slow internet servers. Since being home I have re-attempted the
    process and have been able to fully complete the forced recovery but I will
    receive a message saying:
    “The iPad could not be restored. The disk you are attempting to use is full.
    Removing files and emptying the recycle bin will free up additional space.”
    What recycle bin is the message referring to? Obviously I CANNOT access any
    data on the iPad itself. Just for the **** of it, I did empty my computers
    recycle bin and re-attempted the forced recovery process but as I suspected it
    did nothing for the iPad and I still received the same message: “The iPad
    could not be restored. The disk you are attempting to …”
    Please help

    Here's a couple of Apple Support articles ...
    Resolve iOS update and restore errors
    If you can't update or restore your iPhone, iPad, or iPod touch

  • If db is in simple recovery mode can we identify who deleted the login id?

    if db is in simple recovery mode can we identify who deleted the login id?

    You can take a look in the default trace to find who dropped it. If you are lucky enough.
    The database being in simple recovery mode has nothing to do with it. Even in full recovery mode this is not going to be seperately logged.
    SELECT TE.name AS [EventName] ,
    v.subclass_name ,
    T.DatabaseName ,
    t.DatabaseID ,
    t.NTDomainName ,
    t.ApplicationName ,
    t.LoginName ,
    t.SPID ,
    t.StartTime ,
    t.RoleName ,
    t.TargetUserName ,
    t.TargetLoginName ,
    t.SessionLoginName
    FROM sys.fn_trace_gettable(CONVERT(VARCHAR(150), ( SELECT TOP 1
    f.[value]
    FROM sys.fn_trace_getinfo(NULL) f
    WHERE f.property = 2
    )), DEFAULT) T
    JOIN sys.trace_events TE ON T.EventClass = TE.trace_event_id
    JOIN sys.trace_subclass_values v ON v.trace_event_id = TE.trace_event_id
    AND v.subclass_value = t.EventSubClass
    WHERE te.name IN ( 'Audit Addlogin Event', 'Audit Add DB User Event',
    'Audit Add Member to DB Role Event' )
    AND v.subclass_name IN ( 'Drop', 'Revoke database access' )
    https://www.simple-talk.com/sql/performance/the-default-trace-in-sql-server---the-power-of-performance-and-security-auditing/
    This query is only going to check the last trace file and by default you have four others, putting path instead of the subquery to find the trace path will also work.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • HT4623 I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with

    I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT1947 If you add music VIDEOS to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from diff playlist, no longer can see Up Next, just go to full screen mode button. Using remote app iphone 5 to play out of

    If you add music videos to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from different playlist, you no longer can see Up Next, just go to full screen mode button. Using remote app iPhone 5 to play out of iTunes. It looks like it works fine for regular music, but for music videos you can't see your up next unless you go back on the computer to change once you've left the screen. When using the remote app, you shouldn't need to go to iTunes on the PC to view or edit Up Next already added. See first image, you can hit upper right and get back to Up Next (second image). Third image is music video, where you can't get back to Up Next, just swap between full screen and not. I hoped 3.0.1 would have the answer, no luck!

    wow, very nice review Makes me want to get a vision for myself.
    WebKnight wrote:
    <SPAN>
    Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
    I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
    I just hope that creative has better firmware support with the vision than they have had with the touch.
    Once again, great review

Maybe you are looking for