If your web pages are loading up slowly....This helped me out!

Mac OS: Long delay before webpages load, then load suddenly at normal speed
Last Modified: April 20, 2010
Article: TS2296
Old Article: 106799
Symptoms
When trying to access a website via its DNS name, such as www.apple.com, there may be a delay that ranges from several seconds up to several minutes before the page loads at normal speed, depending on the operating system version and configuration. However, if you access the website's numerical IP address, such as http://17.149.160.49 , the page loads immediately.
Two causes of the issue are described below, DNS configuration and changing networks. Issues related to changing networks usually only affect portable Macs.
Products Affected
Safari, Mac OS X 10.4, Mac OS X 10.3, Mac OS X 10.2, Mac OS X 10.1, Mac OS X 10.0, Mac OS X 10.5, Mac OS X 10.6
Resolution
DNS configuration
This may indicate a non-responsive DNS server or an invalid DNS configuration. A DNS server converts a name to a numerical IP address, "www.apple.com" to "17.149.160.49", for example. You can connect to an IP address without any delay, because the need for DNS resolution is avoided. Here are four scenarios in which the symptom may occur:
You have specified two or more DNS servers in the Network preference pane (possibly at the direction of a network administrator or your ISP), but the first server on the list has become non-responsive, or was entered incorrectly. The delay occurs while Mac OS X waits for the first server to respond, then it goes to the next server in your list. Make sure the addresses are entered correctly. Changing the order of DNS addresses may improve performance. If your network administrator prefers that the primary server be used, you may wish to change back to the original order after the issue is resolved with the primary server.
Your network may be configured to provide automatic discovery of DNS service, without needing to manually type the DNS server addresses at your computer. If you have manually typed a DNS address that is incorrect or out of date, your computer may wait for the incorrect address to respond (a "timeout") before succeeding at automatic discovery.
You have not specified a DNS server, and automatic discovery of the service is not provided on your network. In this scenario, you can only connect via an IP address. Web pages do not load at all via a DNS name, such as is described in this article.
How to resolve
Check with your network administrator or Internet Service Provider (ISP) to make sure your DNS information is correct. If your ISP only provides you with one DNS address, consider requesting a second one for use in the event that the first becomes unavailable.
Once you have the address(es), you can use these steps to change your DNS information. Note: After using these steps, some Internet applications may need to be quit and reopened to return to normal behavior.
Mac OS X v10.5 or 10.6:
From the Apple menu, choose System Preferences.
From the View menu, choose Network.
Click the interface you use to connect to the Internet, such as AirPort or Built-in Ethernet.
If you use Built-in Ethernet: Type your DNS address(es) in the DNS Server field. If you have more than one, separate them with a comma.
If you use AirPort, click Advanced, then click the DNS tab. For each server, click the "+" button under DNS Servers and enter the address provided by your ISP or network admin. Click OK when done.
Click Apply.
Mac OS X v10.4 or earlier:
From the Apple menu, choose System Preferences.
From the View menu, choose Network.
From the Show menu, choose the interface you use to connect to the Internet.
Click the TCP/IP tab.
Type your DNS address in the Domain Name Servers field. If you have more than one, press Return at the end of each to put the next address on a new line.
Click Apply Now.
Changing networks
You may experience a delay with the first connection after changing networks on a portable Mac. For example, you might use an MacBook at home with AirPort, then take it to work or school and use an Ethernet connection. By default, Mac OS X uses one set of Internet preferences (known as a "location") named Automatic that will search your computer's modem, Ethernet, and AirPort interfaces until it finds the one that is connected to the Internet. You may experience a delay while your computer determines which network it is on. This can be easily differentiated from a DNS issue by creating a location that only contains one network interface. For more information, see Using network locations in Mac OS X.

Good tip. Useful DNS servers to try, when doing this -
OpenDNS - 208.67.222.222, 208.67.220.220
Google - 8.8.8.8, 8.8.4.4

Similar Messages

  • If your web pages are loading slowly, this resolved my issue.Hope it helps!

    Mac OS: Long delay before webpages load, then load suddenly at normal speed
    Symptoms
    When trying to access a website via its DNS name, such as www.apple.com, there may be a delay that ranges from several seconds up to several minutes before the page loads at normal speed, depending on the operating system version and configuration. However, if you access the website's numerical IP address, such as http://17.149.160.49 , the page loads immediately.
    Two causes of the issue are described below, DNS configuration and changing networks. Issues related to changing networks usually only affect portable Macs.
    Products Affected
    Safari, Mac OS X 10.4, Mac OS X 10.3, Mac OS X 10.2, Mac OS X 10.1, Mac OS X 10.0, Mac OS X 10.5, Mac OS X 10.6
    Resolution
    DNS configuration
    This may indicate a non-responsive DNS server or an invalid DNS configuration. A DNS server converts a name to a numerical IP address, "www.apple.com" to "17.149.160.49", for example. You can connect to an IP address without any delay, because the need for DNS resolution is avoided. Here are four scenarios in which the symptom may occur:
    You have specified two or more DNS servers in the Network preference pane (possibly at the direction of a network administrator or your ISP), but the first server on the list has become non-responsive, or was entered incorrectly. The delay occurs while Mac OS X waits for the first server to respond, then it goes to the next server in your list. Make sure the addresses are entered correctly. Changing the order of DNS addresses may improve performance. If your network administrator prefers that the primary server be used, you may wish to change back to the original order after the issue is resolved with the primary server.
    Your network may be configured to provide automatic discovery of DNS service, without needing to manually type the DNS server addresses at your computer. If you have manually typed a DNS address that is incorrect or out of date, your computer may wait for the incorrect address to respond (a "timeout") before succeeding at automatic discovery.
    You have not specified a DNS server, and automatic discovery of the service is not provided on your network. In this scenario, you can only connect via an IP address. Web pages do not load at all via a DNS name, such as is described in this article.
    How to resolve
    Check with your network administrator or Internet Service Provider (ISP) to make sure your DNS information is correct. If your ISP only provides you with one DNS address, consider requesting a second one for use in the event that the first becomes unavailable.
    Once you have the address(es), you can use these steps to change your DNS information. Note: After using these steps, some Internet applications may need to be quit and reopened to return to normal behavior.
    Mac OS X v10.5 or 10.6:
    From the Apple menu, choose System Preferences.
    From the View menu, choose Network.
    Click the interface you use to connect to the Internet, such as AirPort or Built-in Ethernet.
    If you use Built-in Ethernet: Type your DNS address(es) in the DNS Server field. If you have more than one, separate them with a comma.
    If you use AirPort, click Advanced, then click the DNS tab. For each server, click the "+" button under DNS Servers and enter the address provided by your ISP or network admin. Click OK when done.
    Click Apply.
    Mac OS X v10.4 or earlier:
    From the Apple menu, choose System Preferences.
    From the View menu, choose Network.
    From the Show menu, choose the interface you use to connect to the Internet.
    Click the TCP/IP tab.
    Type your DNS address in the Domain Name Servers field. If you have more than one, press Return at the end of each to put the next address on a new line.
    Click Apply Now.
    Changing networks
    You may experience a delay with the first connection after changing networks on a portable Mac. For example, you might use an MacBook at home with AirPort, then take it to work or school and use an Ethernet connection. By default, Mac OS X uses one set of Internet preferences (known as a "location") named Automatic that will search your computer's modem, Ethernet, and AirPort interfaces until it finds the one that is connected to the Internet. You may experience a delay while your computer determines which network it is on. This can be easily differentiated from a DNS issue by creating a location that only contains one network interface. For more information, see Using network locations in Mac OS X.

    Yeah.  I'm seeing the same behavior.  Safari hangs when it loads pages.  Firefox loads them quickly.  That's not a DNS issue.
    Some pages hang for MINUTES in Safari.  If you just touch the resize triangle at the bottom right of the screen, then Safari loads the page just fine.  This is a redraw problem, not a DNS issue.
    This happens on both my wife's iMac Core i5 and my Mac Mini Core 2 Duo - both running Mac OS X 10.6.8
    David

  • Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

    Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

    It would help us help you if you provided a link to a non working page.

  • Web pages are missing their default scrollbars - help

    Web pages are missing their scroll bars.
    To be clear — I can create scroll bars for any element
    within a page — no problem.
    It’s that each pg itself which by default should come with its own scrollbars has none.
    So if a viewer can’t see the entire page the viewer has no means to
    horizontally or vertically scroll to see the off-screen portion of the page.
    I’ve talk to the adobe tech support about the scroll-less pages.
    They said the problem is beyond their expertise and lies in the code itself.
    They advised me to reach across this platform for the answer.
    The problem is consistent on all browsers.
    I ran the pages thru Dreamweaver’s browsers’ lab. Pages varied slightly with each
    Browsers, on the whole looked good. BUT a portion of the image on the right side 
    was cut off and the scrollbars were not available on the Adobe Browsers Test Lab page.
    No errors were found when run thru Dreamweaver’s Browser Compatibility.
    I reviewed the code but I have no idea what I’m looking for.
    See For Yourself, the website with no scrollbars: voicesforthearts.com
    Howard Blume
    [email protected]
    max os x  system10.6.6
    Dreamweaver 5  

    While you are at it Howard, I noticed a METATAG in your BODY section.... it's already in the HEAD section.
      <div id="logonavbar">
        <ul>
          <li><meta name="description" content="" />

  • Ever since I upgraded to firefox 3.6.15 the pages are loading extremely slowly, why?

    I use a MacBook pro - about a year old and I have OS 10.6.6 installed. Ever since you pushed firefox 3.6.15 to me the pages are very slow in loading. Is it a cache problem? A second visit to the same page loads faster. sometimes it is slower than others and I don't know why. I have done a speed check on uploads and downloads and all seems to be fine.

    I can get the photos to display in 3 columns if I do this:
    orange Firefox button ''or'' classic Tools menu > Options > Content
    In the Fonts & Colors section, click the Advanced... button.
    Change '''Minimum Font Size''' to '''None''' and OK out of Options.
    But most people are not going to do that. I prefer a minimum font size of at least 10.
    So... how to fix it. The way the thumbnails are sized is that they are 10em with a base font size of 5px. If the minimum size is set to 10px, the pictures double in height and width.
    It would make more sense if the base font size in your stylesheet was larger. Can you edit it? If so, try doubling the font size and halving the relative image size:
    In http://languagesofourancestors.spruz.com/dhtml/corestyle/xstyle.css
    <br>/*All Cards Small*/
    .SUI-UserPic.small, .SUI-ImageCard.small, .SUI-VideoCard.small { font-size: '''10px''';}
    <br>/* User Pics */
    (4 lines down)
    .SUI-UserPic .SUI-CardImage { display: block; width: '''5em'''; height: '''5em'''; overflow: hidden; border: 1px solid #aaa; border-radius: 2px; -moz-border-radius: 2px; -webkit-border-radius: 2px;}
    .SUI-UserPic .SUI-CardImage img { width: '''5em'''; min-height: '''5em'''; border: 0 none;}
    .SUI-UserPic .PopInfo {line-height: normal; display: none; width: 140px; position: absolute; z-index: 2; top: '''4em'''; left: 0; margin: 0 auto;}
    I think that will be more broadly compatible. There may well be some details I've missed, but hopefully this helps.
    I don't know why the minimum font size wasn't applied this way in Firefox 3.6, but I suspect this is the new normal.

  • My mail is loading very slow all of the sudden,but web pages are instant,any idea why it takes forever to load when i click on any mailbox

    my mail is loading very slowly all of the sudden,web pages are instant,takes forever to click on a mailbox and read the mail ,any ideas

    Using mail or an other application?
    Same problem on different mailbox?
    1- try an other mail client
    2- try with different mailbox (google, icloud, ...)
    This can be a temporary problem from your mailserver ... wait 2 or 3 hours ...

  • Since updating to 3.6.22 web pages are very very slow to load and downloads too how can I go back to my healthy computer please?

    Last week I updated to Firefox 3.6.22 (?)and since then a whole host of problems have occurred:
    web pages are taking forever to load
    downloads (like ccleaner and registry booster) wont work
    some programs I've used often aren't working correctly (MS Picture manager)
    I would like to uninstall 3.6.22 and get back to having a healthy computer again.
    Today the web page problem became extreme - pages simply not loading at al and so I have just reloaded 3.6.22 in case something was wrong the first time.
    Suggestions please!
    I'm not that tech savvy and don't know if the installed plugins you've listed below are correct.....
    sue

    Firefox 4.0 was released in March, over 3 months ago. If you have some add-ons that haven't been updated yet for Firefox 4.0, much less for Firefox 5.0, it is time for you to find similar replacements for those add-ons. IMHO, extensions like that should be considered as "abandoned" by their developer.

  • Here's your prototypical Dumb Question: Web Pages are displayed as centered on 4.0- how do I have the page fill the window?

    Here's your prototypical Dumb Question: Web Pages are displayed as centered on 4.0- how do I have the page fill the window?

    Do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • How to prevent duplicate web pages from loading

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/930219]]</blockquote>
    how to prevent duplicate web pages from loading

    <s>Hi berternie, can you describe this in more detail?
    Are you saying the identical page loads in two different tabs? When does that happen -- when you click a link? or when you use a bookmark?
    Or do you have multiple tabs open every time you see your home page (i.e., when you start up, open a new window, or click the home icon)?</s>
    I see, you have more info in this thread: https://support.mozilla.org/en-US/questions/930219

  • Safari 4.0.3 running OSX 10.6.1 -  Pages are loading but NOT thumbnails?

    Just upgraded to OSX 10.6.1 running Safari 4.0.3 last week - everything was working BEFORE the upgrade - but now for some reason I have an issue where pages ARE loading including larger banners, text flash animations etc, but if the site contains small thumbnails they are not loading.
    The icon in the web bar spins and spins for ages and then suddenly where the thumbnails should be I get the blue question make as if the links are broken - which there not as this is happening to well know sites such as youtube gettyimages and ebay and its just to the thumbnails?????
    Take ebay for example, the homepage page loads in fine, and if I search for a product - the page with the listing all loads but not the thumbnail images, yet if I click a listing the full page loads without a problem?
    Any advice, I have cleared the cookies and javascript database all to no avail?

    HI,
    Try Safari Maintenance
    Carolyn

  • Web page music loads in IE but not Firefox. Have downloaded Windows Media Player Firefox plug in but still nothing. Any other suggestions?

    Can't get any sound when I open one webpage in Firefox but sound works in Internet Explorer. sound files are .wmv and mp3 format.
    I have Windows Media Player Firefox Plug in installed and set to always activiate. Also have Quicktime & Shockwave activated. Any suggestions. Operating system is Windows 7. Thanks

    There are a couple issues here that might be the culprit. One is that the player is hidden using a variety of techniques and Firefox often suppresses hidden content because it can be annoying not to be able to control your experience with media. Another possible issue is that the embed tag doesn't specify a content type. Firefox appears to be guessing anyway, and in my case asking whether to activate the QuickTime plugin, but then nothing plays.
    To test what would happen if both of those were addressed, you can run this script using Firefox's Web Console. It grabs the address of the media and creates a new embed that is visible and specifies the content type. Here's how to use it:
    Select the following long line of code and copy it:
    function reEmbedMpeg(em){var el=document.createElement("embed"); el.setAttribute("type","audio/mpeg"); el.setAttribute("src",em.src); el.setAttribute("style","height:20px;width:200px;position:fixed;right:0;top:0"); document.body.appendChild(el);} reEmbedMpeg(document.querySelector("embed"));
    When viewing the problem page, press Ctrl+Shift+k to open the Web Console in the lower part of the tab.
    Paste the code next to the caret (>>) on the bottom line and press Enter to run it. A player should appear in the upper left corner, the progress bar should show downloading and then the content should play.
    Obviously it's not practical to hack every web page you find, but if this is your site or you would be interesting in contacting the owner, hopefully this post will help in getting this working in Firefox.

  • Web Pages not loading on Mobile Devices

    Browsing web pages not working on mobile devices
    I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
    I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
    previously i had adsl from bt and didnt have these issues.
    Solved!
    Go to Solution.

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for