If your Zen nano plus is d

If your Pc doesn't recognize your Zen nano Plus after a firmware update and the player doesn't turn on, try to connect to the USB port WITHOUT the battery in your MP3 Player.
Install the Mass Storage Driver and reflash the device.
For me it has worked.

A new firmware was released over the weakend that is supposed to solve problems of the player turning off or not turning on with protected WMA music.
One other point. When I first got my n200(basically the same as the Nano Plus), I didn't realize that I needed to hold the power button down for several seconds to get it to turn on or to turn it off.

Similar Messages

  • Creative Zen Nano Plus Media Explorer only works for administra

    Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
    Version is .0.03.
    Thanks for any assistance.
    Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

    RMskater wrote:I think you need to change the permissions to "Everyone".
    How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
    I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
    As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
    I'm going to see if WMP0 has problems as well or if it's just the Creative ap
    ps.
    PB

  • Zen Nano PLUS - Firmware Broke My Ze

    Please help me .
    I have read through countless threads here looking for the answer on what to do when...
    ...your Zen Nano Plus is passed warranty, you install the latest firmware, and your player is no longer readable by your USB ports.
    Before I tried upgrading the firmware it would detect it as what it was -- a Zen Nano Plus. Now, however, I plug it in and I <EM>don't even get a notification that Windows detects it even so much as a generic device</EM>.
    Everyone says: <EM>Revert back to an older version of firmware.</EM>
    Question: HOW DO I ACCOMPLISH THIS WHEN ) I CAN'T TURN MY PLAYER ON AND 2) IT IS NOT BEING READ WHEN I PLUG IT IN?
    Sorry about the caps, but I feel Creative is about to let me down after all these years. Did I waste money on this thing or is there an actual solution that works?
    My friend's dad had this exact same problem. He took it back and exchanged it for another Zen Nano Plus <EM>and it did the same thing agan</EM>.
    Thanks in advance.
    PS - Thanks to Creative for being acti've in these forums and trying to help their customers who have given Creative their hard earned money that they earned working at a job.

    IT WORKED!!
    PeeBee you are the man for your post in this thread:
    http://forums.creative.com/creativel...d=279272#M6263
    All this is Creative's doing, though, for their lackluster support for their own product. In one thread they specifically say <EM>Zen Nano Plus has no recovery mode</EM>. Why does it take non-Creative staff such as yourself to call them out and help with these issues? My friend's dad had to take time out of his day to dri've back to Best Buy to exchange it (TWICE). If only Creative would administer care in their own product support then threads centered around Creative's MP3 players being beat down by their own firmware wouldn't have over a thousand thread views each by people looking for retribution for a piece of junk they think they wasted their money on.
    Thank you, PeeBee. I, on the other hand, am investing in Apple next time due to lost faith, faith that has been religiously stood by since the beginning days of Dr. Sbaitso. If this thread gets deleted rather than replied to by a mod, admin, or Creative staff member then it means I'm right.

  • Error Message when Trying to Rip to Zen Nano Plus

    I use Zen Nano Plus Media Explorer and I get this message:
    "Unable to lead database component. The program will now exit."
    I can't figure out what is missing in order to correct the problem. Can anyone help me?
    I use Windows XP Home on my HP Laptop.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Zen Nano Plus can't see new so

    I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

    There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

  • Zen Nano Plus: I can't get my CDs to play in original order...He

    Hello. I'm new here.
    I got a Zen Nano Plus 52 mb a few months ago. Installed the software on my computer. I'm not very computer literate.
    Here's what's frustrating me: I can't seem to listen to my CDs in their original order.
    ) I put a CD in my computer
    2) Whether I view the track list in Windows Media Player or in the Creative Media Menu the track list appears in its original order as seen on the CD.
    3) I "rip" the CD to my Nano player.
    4) When I disconnect the player and go to play the album the tracks are all mixed up and not in the original order anymore.
    I've tried some different things but nothing seems to correct the problem. I'm hoping someone can direct me what to do. I'm very confused, as I don't understand much of the computer terminology I read.

    As in other response, the Nano Plus does not read ID tag info for sorting (it does read part of the tag--song name---only for display while that song is playing). Tag info typically includes the track number. Windows Media Player plays tracks in order of track number contained in the ID3 tags. The Nano Plus only sorts by filename. You can rip your tracks in a format that is prefixed by the track number (for filename). This can be done in Windows Media Player and other programs. Somehow you ripped tracks without the track number first (which would solve your problem). You tracks should look like "0-Come Together-Bealtes.wma" or something like this. This is the FILENAME, as you would see in Windows Explorer. The track info is not visible in Windows Explorer views. You can see it from Windows Media Player or Creative Media Source Organizer, though. Other players like Zen Micro and Touch sort tracks and build the library database on ID3 Tag info, not filenames.

  • Problem with zen-nano-plus!! please help

    i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
    i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
    when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Zen Nano Plus Playb

    When I turn off my Zen Nano Plus, I want the player to resume from where I left off (usually in the middle of my audio book), but it goes back to the beginning of the file. It only started doing this recently... Is there a setting I can change so I can listen from where I left off? Thanks, Dave

    It should work every time but sometimes doesn't. Others have noticed that it is more likely to resume where you finished if your pause the track first before shutting the player off.
    PB

  • Zen nano plus suddenly isn't recognized by WMP 11

    Hi there. I have Windows Vista Home Premium 32 bit on my PC. And I've had no issues with Windows Media Player recognizing my Zen Nano Plus - until this week. It just isn't. All of a sudden it's only showing as a removeable disk. I can access music files and what not - but I'd really like to be able to sync again. Has anyone experienced this problem?
    I did download the new firmware and install it - but still having the issue. I'd appreciate your help and feedback thanks!

    Re: zen nano plus suddenly isn't recognized by WMP n I do have that and while I can still add music and what not - I honestly just prefer going in one way through WMP . However, I did a System Restore Point today to a point to which I had thought I could still sync - and now when I open Windows Media Player it does recognize my device.
    Interesting point - my device now has the udpated firmware; because I had updated last week. And AFTER I did the System Restore, and then plugged in my device, it reinstalled the driver and Windows Media Player did recognize it. So I wonder if this has to do with the new firmware installation; although WMP did stop recognizing my device prior to my updating the firmware. (That is what led me to look for the update in the first place)
    However, this seems to have fixed my complaint. For the moment. Thank you for your response and suggestion!

  • Can't power on Zen Nano Plus

    I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • Zen Nano Plus Won't Turn

    Hi Again, This is my/our first message to this forum after doing a long search and reading. I added to the bottom of another tread of the same title hoping to receive a response and keep that tread ali've and growing with knowledge. Please reply to either that tread which has some links on it that might be of use or to this tread. Later I will play with how to link to this other tread and add it below. OK here is my edit which hopefully works to link you to that other tread. http://forums.creative.com/creativel...d=68897#M68897 My wife, the main frustrated user, downloaded some fix on your site (driver I think) and it killed this piece of crap. She downloaded a fix because on book play back the tracks would every so often go out of order and other trys to stop this didn't work. Anyway the problem is: .. Dave Message Edited by ldelm on 09-05-200707:6 AM
    Message Edited by ldelm on 09-05-200707:20 AM

    Hi Still no reply to my messages. Is anyone home I see a new restricted-entry tread by Creative "CAT" on a New MP3 Player Recovery Tool. http://forums.creative.com/creativel...ssage.id=98778 Anyone have any idea if this will work on a player that doesn't even come on Zen Nano Plus 52KB Dave P.S. I will try the tool later if no one replies to this message or is even home on this listMessage Edited by ldelm on 09--200707:09 AM
    Edit-2 to add in link to CAT's message
    Message Edited by ldelm on 09--200708:07 AM

  • Zen Nano Plus -- "Cannot create file .

    Why not?! I've been transferring & deleting songs since I bought the Zen Nano Plus and now all of a sudden, I can't place songs into it. Help please.

    Have you put all of your files into the root folder?
    If so, create a sub-folder and put your files in there. Then you will be able to fill up the player.
    If not, have you tried reloading the firmware?
    PB

  • Fm radio problem and speakers zen nano plus..

    . Why does my zen nano plus automatically turns of when i use the fm radio even if it has full battery?
    2. Why does my zen nano plus automatically turns of when i connect pc speakers even if it has full battery?
    I NEED HELP!!!!!!!!!!!!!

    Try reloading the firmware for your Nano Plus - that sorts out most problems with these players. Go to Support, Downloads and choose MP3 Players, Zen, Nano Plus. Make sure you follow the instructions carefully.
    PB

  • My zen nano plus prob

    I uploaded the holy bible audio in my Zen nano plus mp3 I bought three days ago. totally 66 folders, but can only show up 38 folders, new testament 2, old testament 7, I try to delete, format, and upload again, the problem is still here.
    two friends met the same problem. one is the zen nano, the one is the <FONT color=#333333>Muvo TX FM.
    If any body have the same problem before, thanks a lot for your gus help.

    There is a maximum number of folders supported by the players and it depends on the firmware version. It varies between 50 and 60 folders including the automatically created folders such as Encoded Tracks and Recorded Tracks.
    This also includes high level folders without files in them - if you had an NT folder with 20 folders in it and an OT folder with 30 folders in it then that would be 52 folders not 50. The last ones alphanumerically are ignored.
    PB

  • Zen Nano Plus - 300mb of the 1G is not available to store music

    About 300mb of?space is?unused on my Zen Nano plus (G) and I cannot load anything onto it. Any suggestions?Is this a firmware issue??

    Please read the FAQ sticky thread as this is covered there - it is a limitation of the root folder in the FAT filesystem - put your songs into a folder and you will be able to fill it. PB

Maybe you are looking for

  • Photos are not dispayed correctly

    All the pictures taken holding my camera vertically (portrait) are shown on the wrong side on my Iphone even if I rotated them on the computer before, Does anybody have a solution to that? Many thanks

  • DivX upgrade corrupted quicktime AVI playing ability

    I recently upgraded my DivX player and converter, after doing this my Quicktime player stopped playing AVI files. which is probably a good 85% of my videos and movies which i cant get to reformat to Mp4, MPEG or any of the other formats that it will

  • Db connection broker & auditing?

    Got any suggestions for how to implement proper TRIGGER based auditing in Oracle when using the DB connection broker? A problem w/ using DB Connection broker is that it maps all connections to it's own and thus wiping out any info about the actual us

  • Starting with the same folder automaticaly any time opening bridge

    Hello everybody, is it possible to configure adobe bridge that way that each time I open it bridge is going to start with the same folder? Or can I tell bridge to use the folder that was opened when closing bridge the last time? Thank you very much f

  • Steps for upgrade to GRC 5.3

    HI Folks, I would really appreciate if I can know the steps for GRC upgarde to 5.3 from 5.2. The only components we use are CC and firefighter. Is there any need to backup anything before the upgrade except the database and filesystem? Regards,