IFCU - How to enter the readings ?

HI dears,
         I am trying to use fleet management
        I had customized the settings for fleet management
       When i entering into IFCU i am not able to enter the consumed quantity as it is in a display mode. No measurings points found eventhough i had created for that equipment
M.Alagesan

Hi Nagaraju
Did you used the same measuring positions which you have defined for fuel counter and Distance related counter's. If not then system will not recognise the measuring points.
In Customizing          -    Define special measurement positions for Fleet Objects (counter purpose)
         DISTANCE - consump relevant distance counter
         FUEL         - Primary fuel counter
         TIME          - consump relevant time counter
where the same should be used? In creating measuring points ? Could you please explain it ?
Alagesan

Similar Messages

How to enter the values in JTable in runtime

how to enter the values in JTable in runtime

Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
With Arrays
String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
String[] numbers = { "one", "two", "three", "four", "five" };
String[] letters = { "A", "B", "C", "D", "E" };
String[][] data = { numbers, letters };
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));
With Vectors
Vector cols = new Vector();
cols.addElement("colone");
cols.addElement("coltwo");
cols.addElement("colthree");
cols.addElement("colfour");
cols.addElement("colfive");
Vector numbers = new Vector();
numbers.addElement("one");
numbers.addElement("two");
numbers.addElement("three");
numbers.addElement("four");
numbers.addElement("five");
Vector letters = new Vector();
numbers.addElement("A");
numbers.addElement("B");
numbers.addElement("C");
numbers.addElement("E");
numbers.addElement("F");
Vector data = new Vector();
data.addElement(numbers);
data.addElement(letters);
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
Regards
Riz

How to enter the database in oracle 11g!!

Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumar

SET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:

How to enter the currency value Flex mobile

Hi, friends, I type from Brazil
how to enter the currency value in textinput
format BR ( Brazil )?:
Thank's

Hello Ashok,
Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
Hope it helps.
Thanks,
Sriram S

Nokia 1650 - how to enter the person's 2 [two] con...

i have purchase nokia 1650. I want to know how to enter the phone-numbers or details of person? [like office,home,mobile, email, etc]

goto particuler contact name->Details->Options->Add Number.
You can do this only for the contacts which r saved in phone memory. If you have contacts in SIM, you have to move it to phone memory before doing this.

Hello. Tell how to enter the program and to start working in it. I paid, loaded and installed the program Photoshop CC

help please to start working... with English at me in any way without translator... if somebody can explain in Russian as to start the program, I will be very grateful
Tell how to enter the program and to start working in it. I paid, loaded and installed the program Photoshop CC

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

How to enter the BIOS settings on my Satellite L50-A-k4W?

Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

At first you have to perform an complete shutdown.
Here an HowTo:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

How to enter the plan in SAP for semi finioshed parts

Dear all,
One of my client is manufacturing both the Semi finished (Part "B") as well as Finished parts (Part "A") in their location.
The production capacity of the Part "A is 40,000 units.
But, the production capacity for the Part "B"is 60,000 units
At present he is handling the production unit with 2 different plans (manual plan).
Now the question here is,
1.He wants to feed both the plans in to SAP R3
2.Users should make use of the MRP generated planned orders only
How to configure is this?
Your suggestions are greatly appreciated
Thanks,
CLS

Dear Mr.Dharma,
Thank you for your information. We are following the process as mentioned by you. Here we have a problem - according to my requirement, i have plan for both materials A and B.
Example :- The plan for item A = 20,000
I am entering the demand in MD61. after running MRP system generates planned order for item A as well as item B for the qty of 20,000.
Here the available capacity for item B is 40,000 hence we want to create planned orders for 40,000 for item B and 20,000 for item A.
Regards,
CLS.

How i enter the ECG signal to the lab view through the sound card

first i open the help and find example the display the signal of the mic
and i enter the ECG signal through the mic and displaied
but when displaied the ECG appearied only one period on the chart so on if the chart with full screen you can see only one period
and when i change the x scale the signal compressed in a part of chart and the remain part of the chart empity
so how i display at least three periods of ECG
Attachments:
ECG with sound card.vi ‏20 KB
Untitled.jpg ‏37 KB

I do not have LabVIEW version 9, only 8.6
Without looking at your program can take a guess. Have you set the property "chart history length" of the graph? If you consider that an individual has a heart rate of up to 50Hz, or period of 20ms. Soon the number of points required is (3 * 20ms) / (sample time).
If this is not the problem, you could send the converted code to version 8.6 of LabVIEW?

How to enter the new UEFI( BIOS ), if UEFI does not respond to F10(esc, e.t.c.) at startup?

1) I bought a HP 255 .. preloaded with licensed windows 8.1 (overpaying about $ 150 compared with the same nout. with pre-dos ,
2)yesterday update the "BIOS" -UEFI- from HP website and on the recommendation and with the help of an assistant "Assistant HP",
3)reload (successfully re-entered the windows 8.1), and
4) wanted to put second OS (ubuntu Linux without removing the windows 8.1, which is totally legal action and a 100% user right !) in accordance with the instructions http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html. (way before such procedures have been much easier! Have to completely abandon the windows!)
5)After compression partition with win8.1 and release empty partition for second OS( Linux), off in the control panel windows "Fast Boot" I turned off the laptop (which is turned off and not in sleep mode switched). entered the UEFI, Turn off secure boot and Legacy Boot (probably in vain!)
After saving and rebooting the laptop completely refused to accept from the moment of "power On" the F10 (et al. Keys esc, F2..12), and showed only "black screen" without any symbols and inscriptions, though, and respond to Ctrl-Alt-Del (blinking backlight -reload). external monitor also showed "No Signal".
If I understand correctly, UEFI has been "upgraded" (not for the better by m.), And then at boot became a special check windows loader (type bootx64.efi) th right?
1) where (is there?) correct installation instruction 2nd OS (for example Linux Ubuntu), without removing the pre windows 8.1 (with the new UEFI)?
2) what can be done? How can I enter the UEFI-"BIOS" to fix options (if i have not CD with windows8.1 liveCD, but have backup of pre-inst win8.1 from nout)?

You can do that without going in the BIOS(UEFI). At the Start screen, type System Settings and hit Enter. There is a Boot Options tab there where you can make your boot choice. However, for when you do need to get in the BIOS in Windows 8.x, Shutdown the computer while holding down the Shift key. Then, on Startup, hold down or rapidly tap F2 while hitting the Power button.
Yes, you do have a Recovery partition on your HDD and you were advised to make recovery media when first using your machine for even further protection in the future. It's up to you whether you wish to make even further images. I do and I use Macrium also.
You need to spend some time with your User's Guide particularly starting on page 46 "Recovery of The Internal Storage Drive".
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How to enter the special character ALT225 - the double S in Germany

Hi,
I use the double S of the German keyboard in my wifi password.
Any idea how to enter it ?
This is this one : ß
Thanks,
Patrick

touch and hold the "S"...you will get different options for the letter...it must be a lowercase "s" and not and uppercase "S" otherwise you won't get what you are looking for. So, make sure the arrow isn't highlighted

How to enter the two artist in a song?

if the song have more that one artist, how should I
enter the format in MP3 tag and let itune know it
have more than one artist? I try name1/name2 but ipod
trust the name of the artist is 'name1/name2'

basically I put the name of the artist I like more under the artist label and then next to the song name I put Ft.(featuring) the other artist.
Or you could keep two copies of the same song and just label them as different artists. If you want to be able to find them looking for either artist.
good luck

How to enter the conditions in Validation at OB28, system is not allowing

Hi,
I am trying to put some conditions in validations in Tcode OB28. But system is not allow me to enter anything. The SAP screen is in non editable mode. But I am trying to create Step 1 where system should allow me enter the prerequisite , check and error message, it means it is in creation mode where I have to enter input.
Please tell me the reason how it could happen, and inform me the process to create validation.
Regards,
Venkata

Hi
If you select any of the fields from the table fields appearing below, they automatically get transferred to pre-requisites.
Or if you want to enter the conditions manually, then select Settings -> Expert mode.
Regards

Dynabook: How to enter the BIOS settings?

I have a Dynabook V2/470 CRC. How can I enter the BIOS
settings on this laptop?

Hello
This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
Bye

How to enter the domain name in MS Exchange account

When I want to connect my macbook with the companies e-mail what is on an MS Exchange Server I am missing the filed for entering the domain name. This is available in IOS 6 on ipad and iphone but where it is on the OS X?
..by the way: how do I enter an backslash?
Thanks

Hi,
You should not need the domain if you use the recent Exchange server 2007 or 2010.
However if those are not confugured properl and you do need to put it in you should try:
domain\username
( \ is next -left- to the Enter key on your MBP :-)
You may have to use [email protected]
This all is not great though.
Also worth mentioning that you will not be able to connect to Exchange 2003.
Let m kenow if you have more questions.

IFCU - How to enter the readings ?

Similar Messages

Maybe you are looking for