Iforgot my lock code for my iphone5

i forgot my lock code for my iphone5

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New.

Similar Messages

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • Forgot my lock code for my iphone4

    I have changed my lock code for my iphone4 and now I don't remember it, I don't want to looose all my data.

    if you mean the passcode
    http://support.apple.com/kb/ht1212

  • Does the lock code for my iPad covered by my warranty?

    Does the lock code for my iPad covered by my warranty?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Lock code for 6220c

    i forgot my lock code for 6220c? how can i unlock it? oh, please help...

    If you haven't changed then its 12345 by default. If you have done so then you will have to go to nokia care point. They will do it for you, but may charge you for that. Also take purchase proof along with you.
    Please thank me by giving 'KUDOS' star. It will help me to serve you better.
    Currently using N82 and 5230. Next would be N?

  • How do I set up a lock code for my Nokia C2-02?

    Hi, I have a used Nokia C2-02 phone from a seller on eBay.
    I wish to protect my privacy so that other people cannot access my texts, etc.
    When I go to 'settings', 'security', and click on 'access codes', in order to set up a lock code,  the display says'change security code'.
    When I ckick on it, I get a request for my security code.
    Twice now I have keyed in'12345', which I take to be the default code.
    Each time I get an error message and the second time it said that I have only one more chance to key in the correct code.
    Perhaps the previous owner had a code, which I take to be the same as a security keyguard code.
    When I go to 'device' in 'settings', it says that the security keyguard is off.
    I can switch it on, but to activate it I again need to key in a code.
    Am I corect in thinking that either someone has alrerady set up a code or the default code is not '12345'?
    Also, What can I do to set up my own code?
    Fianally, What if I use a pin code? Will that protect my privacy?
    Do I have to get in touch with my network provider ( Tesco Mobile) in order to set it up?
    I'd appreciate any help anyone can give,
    Laurence
    Solved!
    Go to Solution.

    If I used a  pin code instead, would it protect my privacy?
    would it stop those without the code reading my texts and so on?
    PIN Code is basically for the SIM card and not the phone. Talking of privacy, your phone will be fully explorable if the SIM card is removed, so PIN scenario is pretty wasteful. Majority of the phones only ask for the PIN code when the phone is started and register the SIM to the network only wen PIN is furnished.
    If It does not work I could find that I have locked the phone, which could necessitate sending it to the Nokia Care centre.
    This is where the online free service may come in. It claims that it can find the security mastercode for any individual phone, based on the IMEI number, which you access by keying in asterisk, hash, 06, hash, or by taking the back off the phone and looking inside.
    Armed with the 10-digit mastercode you key it in and it unlocks the phone.
    That, at least, is the claim, but on another mastercode site there's a warning that the mastercode works only for older models.
    I have my mastercode, but I don't know whether to take the chance.
    Does anyone have any views on this?.
    , Cheers, Laurence
    Unfortunately, these type of Master Codes do not work. If ever they worked, the phones would become too easy to break in. As far as I can remember, I have not seen any person with a claim that one of those Master Codes worked for them. Maybe they worked for very very old 1st gen devices from Nokia, but not anymore. The security code is based on what user enters in the settings and there doesn't exist any master code to over-ride that. If it would, Nokia Care should be making use of that instead refurbishing/flashing the phones in every case that called for Keyguard Code.

  • Help...forgot the lock code for N95 8GB?

    I was trying to use my device after a gap of an year.
    However, swithcing on the phone, it asks for lock code. I have never changed it before. I tried factory default code 12345. Tried couple of others like 1234, 0000 etc. None seem to work.
    I also tried switching on the phone after pressing Call, * and '3' and still it is asking for lock code.
    I tried connecting to Nokia PC suite and it doesn't recognise the phone at all, so can't update the software and see if it resets the lock code.
    Can anybody give me any further suggestion please?
    Thanks

    /t5/forums/searchpage/tab/message?filter=location&location=Board%3Asmartphones&q=N95+hard+reset+code
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

  • Lock Code for nokia 5530

    Hi!
    I forgot my password (lock code) and I can't remember it............ can anyone plz help me with this....

    You have to bring it to a Nokia Care Center for unlocking. It cant be done at home as you need special hardware for this. Bring your proof of purchase.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • HT1430 Can't remember my lock code for iPad

    I forgot my lock code to get in my iPad and what can I do to change it or reset it to factory settings and restart

    Connect your iPad to iTune (computer) and do a restore.
    http://support.apple.com/kb/ht1414
    Note: Data will be lost

  • Set a second screen lock code for parents

    Can I set a second lock code to use on the lock screen to access my childs phone?

    There isn't a way to do that. With the phones that have Touch ID you could add a second fingerprint which would allow access (except that a passcode is still required when restarting).

  • HT1414 forgot screen lock code for 3gs, how can i reset

    cant remember pass code for 3gs, says connect to itunes, when i do it ask me for code, dont have cmputer,using one at work

    http://support.apple.com/kb/HT1212

  • Lock code for E75

    have my nokia E75,forgot the lock code.i tried some given ideas bt couldn't work.what else cn i try?

    Puk code is on your sim pack.No need to call retailer unless you lost it.you can also get it from the operators website in most cases.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Lock Code for E61

    I lost to the lock code. Would any body please assist me figuring out how unlock it? The

    one easy way. re-install the firmware and your lock code will be reset to 12345

  • HT4061 I downloaded  IOS7 on My Iphone5 and put in a 4 digit lock code for find my phone but My phone wont Accept it. It wont let me restore/backup.

    I put in My IMEI code and ICLOUD tells me THAT THE product has been replaced. I am doing This to TRY TO ACTIVATE MY IPHONE5 AS it wont Accept My 4 digit code after downloading IOS7
    So My phone in disabaled, wont let me backup,restore kos FIND MY PHONE IS TURNED ON! How Canon i turn it on if phone is disabaled and computer wont recognise phone kos its locked and if i reboot it it demands i enter code (how Can i, phone,computer wont Accept) TALK ABOUT BANGING MY HEAD AGAINST A WALL, ALL I WANT IS TO USE MY PHONE . APPLE INTRODUCE NEWS SUPER SYSTEM, BETTER THIS, BETTER THAT, HA. IVE SPENT ALL YESTERDAY AND STILL TRYING TO RESOLVE THIS, LET ALONE MAKE A SIMPLE PHONE CALL!
    HELP ME SOMEONE PLEASE ,PLEASE

    You can't restore a backup to a phone that is running a version of iOS earlier than the version running when the backup was made.  Normaly this situation occurs when replacing a phone, and the eplacement OS is not up to date.  The fix is to update the replacement phone, then restore from the backup.
    You could try an older backup made with iOS6.
    Anyway, why do you need all your info on it while the screen is being fixed?

  • My daughter set the lock code for my second or first generation ipod and i dont know what numbers she pressed. The ipod was loaded on a pc in Texas, and i'm currently in Georgia. I have a laptop, but I dont want to wipe out all my music. HELP!!!

      My daughter has interrupted business as usual because she decided to change the passcode on my ipod. This is a first or second generation nano maybe, and it was loaded on a pc in Texas. I dont want to lose the songs that my mom loaded for me because they're irretreivable. Could someone tell me the process to unlock my ipod from my laptop, but reserve my exsisting music?

    Try connecting the iPod to the computer your normally sync it with.  Then properly eject it.  Upon doing so, you may discover that your iPod is unlocked.  If it is, make sure to disable the Screen Lock or change the code to something you can remember.
    Otherwise, if that doesn't work, your only option at that point is to restore the iPod via iTunes.  And yes this will involve wiping all content and settings from the iPod.  Afraid there is no other way.
    B-rock

Maybe you are looking for

  • Re: Running the same (Forte) application multiple times -for different

    Hi We had the same problem - how to deploy a number of identical applications, using each their own db. (for training). The solution we used is to wrap the entire application into different applications by using a very small module called KURSUS01, K

  • File Adapter polls all the files from the directory when deployed again

    Hi, File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again. For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the dir

  • Oracle DB: How to parse XML where element names are non-standard ?

    I'm in the unfortunate situation that I have illegal XML that I would like Oracle to parse. By 'illegal' in my case is that there are element names that start with an illegal character, such as a digit. Apart from this the XML is syntactically valid.

  • Security sync issue with a newly create group

    We have created some groups like A to D . in that for C we are not able to refresh the security . we have added 2 users only. later we have deleted the group and created the same. even then also we are not able to find the group or not able to do ref

  • Editing/Track Changes in RH7 HTML

    I am looking for a way to create topics, send the topic electronically, to a SME, have the SME edit the topic, send it back and accept or reject the changes from there. The SME's will most like NOT have RH7. Does anyone know how to "track change" tex